Blade 17 + DyAc Monitor | Razer Insider

Blade 17 + DyAc Monitor

L
Hello.
Trying to connect my blade 17 2080 maxq super 300hz (2020) to a Zowie XL2546 Monitor..
Got the thunderbolt 3 to display port cable from ebay but something is not right ...
i cant get DyAc to work..
For example when i ADS in Warzone image is quite blurry and i can't track anything ...
I did everything i could software wise and nothing helped, and i came to the conclusion that the issue is in my cable..
Does anybody run same setup?what cable should i use for this?
please post some links to where i can buy one .
Thank you
This topic has been closed for comments

3 Replies

Razer.Caziel
Userlevel 7
Do you experience any motion blur or ghosting on your laptop's monitor? If not, then there's a good chance that the performance of the external monitor's display is affected by the cable or the dock used in the setup. For now, please try to use the external monitor and cable on a different PC to check if it yields similar results. I'll be moving this to our Systems section, but feel free to send me a PM should you need further assistance.
L
No on the laptop its clear
am having the same issue using it on my old pc.
Its a 100% the cable.
Could you recommend any cables for this, or should i contact Benq and ask what cables are best for DyAc?
Razer.Caziel
Userlevel 7
Lightni
No on the laptop its clear
am having the same issue using it on my old pc.
Its a 100% the cable.
Could you recommend any cables for this, or should i contact Benq and ask what cables are best for DyAc?

It would be best if you contact BenQ support instead so they can point you in the right direction. They may even send you a cable that's up to spec if the monitor is in warranty.
CookiesCookie settings