Junglecat Case? | Razer Insider

Junglecat Case?

  • 13 November 2019
  • 19 replies
  • 115 views

At this point I love the junglecat and use it a lot!!

The problem is that since it can come undone in 3 parts and I have it with me everywhere I go it would be really nice if there where a small case to keep it clean and protected when on the go!....

I wonder if there is any chance of this becoming a reallity??

This topic has been closed for comments

19 Replies

Userlevel 7
Probably not by razer. But I am sure you can find another company.
Userlevel 7
xARACHN1D
Probably not by razer. But I am sure you can find another company.


You will have to get some cases/pouches which will fit the dimensions of the junglecat, like what @xARACHN1D said above. Amazon has a lot of options.
I would of liked to have something made for it that fits like a glove lol
I would think a case made for the Nintendo Joy-cons would work, wouldn't it?

Such as: https://www.amazon.com/Nintendo-Switch-Storage-Protective-Carrying-Black/dp/B07DHGXBTB/ref=sr_1_1_sspa?keywords=nintendo+joy-con+case&qid=1574102937&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyNVVHODFMSDdYT0lVJmVuY3J5cHRlZElkPUEwMDk4MjY0MU1DOVNVV1dISklMMSZlbmNyeXB0ZWRBZElkPUEwMzEwOTk3SEQ1QzJNSjFOT045JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Ok, I pulled up a youtube video comparing the junglecat controllers to the switch joy-cons and clearly the joy-cons are a fair bit larger, so while a joy-con case would work it would be a bit larger than it needs to be.

To me, it looks like a job for the 3D printer but I only just ordered my junglecat so I won't have it in-hand to take the dimensions and start prototyping a case for a few days yet. I think thats what I will ultimately do, though, as I want a good way to carry the controllers in my backpack without worrying about the joysticks being ripped off or buttons being mashed, etc.
Speaking of cases, Has anyone figured out what other phones match the dimensions of the 3 phone cases that come with the Junglecat. I'm a Steamlink user myself and want the joy con style gameplay. I dont have an android phone, so wondering what else might fit.
WARbladezTenno
I dont have an android phone, so wondering what else might fit.


? If you don't have an android phone... then what do you have? A blackberry? The Junglecat does not work on iOS you know...

In terms of cases for [android] phones other than the 3/4 currently supported, I'm guessing a 3D printed case is going to be your only hope. I would not hold my breath for Razer to add too many more cases, there might be some for other future flagship products and maybe, just maybe, some third party might take the time to make some (doesn't sound profitable, but who knows).

Razer would be smart to build and offer a universal "slider" case with telescoping action, similar to other solutions already available. It would be another plastic thing that just needs the rails for the controllers to slide on, and then it just needs to telescopically slide under spring or band tension to hold whatever phone with a bit of friction. This is how a lot of competitor products work, except the controllers are not removable its all one piece. Again, don't hold your breath.

I still say a determined person will need to spend a couple hours on tinkercad and fire up their printer, reserve some time on your school's printer, or hire the print done (lots of third parties will print your designs and ship them to you), etc. There is a nice opportunity for whoever is first to get some accurate models for the rails out on thingiverse or stlfinder, probably won't be me because I don't know what "free time" is, but give it a while and someone out there will have a working design for the rails and then you can import that in tinkercad and smash it together with someone else's design for a case for your phone, get it printed, and then rock on.

Truth be told the easiest thing to do today is still to just buy a Razer Phone 2, they are only $349 at my local best buy (that's all I paid) and the phone is fippin awesome. Got my Junglecat delivered today, dropped my phone in the case and as another user said on here gaming life is cherry. I still need a carrying case for the controllers in my bag tho, so I'll be firing up tinkercad and my 3D printer soon enough i'm sure..
Appreciate the Reply, I'm probably gonna end up buying a Rp2. The price is low and the Specs are high. Doesn't happen to often. Plus I'm ready to change it up, been using Iphone 6s for a while now.
WARbladezTenno
I'm ready to change it up, been using Iphone 6s for a while now.


Good god I should think so. My wife just finally got a new phone and she was on a 6s up until last month, that phone was so bad it was driving us BOTH nuts! (And I had even replaced the battery in it).

Shes all set with an iPhone 11 pro now. No Junglecat for her, but she's happy.
andrewr90
Good god I should think so. My wife just finally got a new phone and she was on a 6s up until last month, that phone was so bad it was driving us BOTH nuts! (And I had even replaced the battery in it).

Shes all set with an iPhone 11 pro now. No Junglecat for her, but she's happy.

Iphone 11 wow, Thats really new LOL, When you mentioned grabbing the RP2 at Best Buy, I was surprised;didn't know they had the phone there. I'm so ready. Its very likely the phone will be used for Steam Link and Xcloud. And a Word game/ Candy Crush. My wife likes to play the same games on two different phones. Hope she likes CC on 120hz display Lol.
andrewr90

To me, it looks like a job for the 3D printer but I only just ordered my junglecat so I won't have it in-hand to take the dimensions and start prototyping a case for a few days yet. I think thats what I will ultimately do, though, as I want a good way to carry the controllers in my backpack without worrying about the joysticks being ripped off or buttons being mashed, etc.


Been saying this for a bit now. Would be nice of razer to at least release the 3d files
Ugh, forum won't let me fix my replay.

Been saying this for a bit now. Would be nice of razer to at least release the 3d files for the rails, then anyone could technically design a case to fit. Personally, I'd like something that would snap around the arctech case (for the rp2) so I wouldn't have to swap cases. I mean, I guess I could design something (I have a 3d printer) but don't have the time to design.
Here you go. Just published it and created a couple of sleeve cases using these rails - they work great. Can be used to add mounts to any other case/object. Enjoy.

https://www.thingiverse.com/thing:4100488
Userlevel 3
YK2018
Here you go. Just published it and created a couple of sleeve cases using these rails - they work great. Can be used to add mounts to any other case/object. Enjoy.

https://www.thingiverse.com/thing:4100488

Very nice work on this. Going to see what I can do for a fit with the Arctech Case using ABS carbon fiber from a MakerBot 2x
Userlevel 5
YK2018
Here you go. Just published it and created a couple of sleeve cases using these rails - they work great. Can be used to add mounts to any other case/object. Enjoy.

https://www.thingiverse.com/thing:4100488

Ooooh super burn!!! On me! Second to the gate! ;)
Good initiative!!!
You beat me by a few hours. (mines current reprinting in higher quality)
I'm glad we seemed to have similar ideas on the same day.
Obvious winner here: Junglecat users!

LOL, competition breeds innovation

I'm just glad others are doing RAZER designs also.
Haven't looked at your design yet, I'll look after this post.
Mine were designed to fit onto the Pro case, though, ditching the special case all together.
Let that Chroma shine!
Seems this forum doesn't allow direct picture upload, or I'd post a quick pick.
worldRazzmicBerrybest167
Ooooh super burn!!! On me! Second to the gate!
You beat me by a few hours. (mines current reprinting in higher quality) they were ready yesterday, but I was busy.

LOL, competition breeds innovation

I'm just glad others are doing RAZER designs also.
Haven't looked at your design yet, I'll look after this post.
Mine fit onto the Pro case, though. Let that Chroma shine!
Good initiative!
That's great! Post a link to yours please. The more the better. Cheers.
Userlevel 5
YK2018
That's great! Post a link to yours please. The more the better. Cheers.

Will do!
Not too long till I get home. Couple hours.
(files are on home computer)
Ill have to set up an account, too
Userlevel 5
worldRazzmicBerrybest167
Ooooh super burn!!! On me! Second to the gate! ;)
Good initiative!!!
You beat me by a few hours. (mines current reprinting in higher quality)
I'm glad we seemed to have similar ideas on the same day.
Obvious winner here: Junglecat users!

LOL, competition breeds innovation

I'm just glad others are doing RAZER designs also.
Haven't looked at your design yet, I'll look after this post.
Mine were designed to fit onto the Pro case, though, ditching the special case all together.
Let that Chroma shine!
Seems this forum doesn't allow direct picture upload, or I'd post a quick pick.


YK2018
That's great! Post a link to yours please. The more the better. Cheers.

https://www.thingiverse.com/thing:4105924
snap together Junglecat RAZER phone mounts

Doesn't seem to be showing the thingverse 3D model view. I'll take some pictures, of the printed thing both on the phone and snapped together.
Userlevel 3
worldRazzmicBerrybest167
https://www.thingiverse.com/thing:4105924
snap together Junglecat RAZER phone mounts

Doesn't seem to be showing the thingverse 3D model view. I'll take some pictures, of the printed thing both on the phone and snapped together.

I will also give these a go in ABS for the Arctech Case!! Good Job!!!