razer blackwidow how to dissassemble?
How can I dissassemble my razer blackwidow? I know there are 4 under those sticky things but other than that I don't have a clue
This topic has been closed for comments
This one
You may refer to these guide.
https://www.ifixit.com/Guide/Razer+BlackWidow+Chroma+Lights+Replacement/77611
https://www.ifixit.com/Guide/Razer+BlackWidow+Chroma+Lights+Replacement/77611
xCryptik
You may refer to these guide.
https://www.ifixit.com/Guide/Razer+BlackWidow+Chroma+Lights+Replacement/77611
That isn't the same keyboard that I have, I removed all the screws from the corners but other than that I can't find anything else and my keyboard still wont open
dunk it in the water.
This is one of the new blackwidow. So finding the disassemble reference might not be available now, but later.
Maybe water is the solution.
This is one of the new blackwidow. So finding the disassemble reference might not be available now, but later.
Maybe water is the solution.
aeroStrawinteractive379
That isn't the same keyboard that I have, I removed all the screws from the corners but other than that I can't find anything else and my keyboard still wont open
Do you mind take picture of your current keyboard instead? Pry it open from the sides if you're sure that all screw are off the casing.
Sye_The-Vie
dunk it in the water.
This is one of the new blackwidow. So finding the disassemble reference might not be available now by later.
Maybe water is the solution.
What? Lol why would i dunk it in water
xCryptik
Do you mind take picture of your current keyboard instead? Pry it open from the sides if you're sure that all screw are off the casing.
Will do
The top 2 corners dont have screws its just those 3 down there with 4 screws. Other than that I didn't find anything else
Just curious, are you trying to disassemble the keyboard to repair some sticky key issue, or to switch the mechanical switch to suit your gamin?
Sye_The-Vie
Just curious, are you trying to disassemble the keyboard to repair some sticky key issue, or to switch the mechanical switch to suit your gamin?
Trying to repair an issue I have on the keyboard, it isn't switching on. I still don't know how to open it up. I unscrewed all the scews in the corners, are there more?
Oohf! So not turning ON?!
I'm sure you tried changing the USB port.
So as I mentioned earlier, because this is a new blackwidow version, finding the reference of opening the keyboard might be hard to find. I believe after you have removed the screws, it just needs a good wedge with a screwdriver to remove the cover, but the question is where to wedge it?
If it is a new keyboard, maybe the warranty might cover full replacement? otherwise try communicating with the RAZER tech support
I'm sure you tried changing the USB port.
So as I mentioned earlier, because this is a new blackwidow version, finding the reference of opening the keyboard might be hard to find. I believe after you have removed the screws, it just needs a good wedge with a screwdriver to remove the cover, but the question is where to wedge it?
If it is a new keyboard, maybe the warranty might cover full replacement? otherwise try communicating with the RAZER tech support
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.