Mice and Surfaces

this is pretty old mouse. i checked for driver updates in control panel. right click is working but left click it works only in few areas or if i click with more pressure. hardware issue, i tried in laptop and it still showed the same. Haven't cleaned at all and i tried dissasembling to clean but the area between the left click and base i didnt know how to remove (i was able to remove screws and see the scroll wheel and stuff). Couldnt find any software in the razer website first thread btw

Team, I have two Death Adder Elites and both of them have a jumpy scroll wheel that makes the scroll wheel almost unusable. Approximately 50% of the time when I scroll on a long page, the scroll function is completely unpredictable and I end up jumping all over the page. This makes scrolling untenable when trying to view large documents etc. It seems like this is a common problem (via reddit). Is there a resolution to the problem or how do I fix it? I would appreciate any insigt

Hello, I am no longer able to find my Basilisk V3 Pro via Bluetooth. But I could already connect it to my Steamdeck. However, today when I wanted to connect my mouse via bluetooth also with my laptop times, I could not find it. I thought I would have to unpair the mouse with the Steamdeck first to be able to find and use it on another device. Hopefully that's not the case and I can actually pair it with multiple devices at once and then switch quickly and easily via the profiles. So then I unpair the mouse from the Steamdeck, but I still couldn't find it on the laptop. And then I couldn't find it via the Steamdeck either. The first time I paired the mouse with the Steamdeck, I didn't have a firmware update applied. So I guess that must have caused the problem. I have also already reset my mouse. Does not bring anything. Does anyone have an idea or the possibility to check it with his mouse (with latest firmware update). Of course only if you do not rely on Bluetooth. Greetings fro

Old mouse click mecanics mod. i'm crazy hahaha.

Mouse finally died after years of using it (no more lights/only right click working), I have the Razer Trinity and Hex v2 as back up but I don’t like the shape/size/weight of them compared to the Naga Hex v1. Any recommendations closer to Naga Hex v1? Or any store that still selling them (preferably new)? Thank you

got razer mamba elite,, whenever i exit or close the synapse from taskbar , the lighting settings changes to default. even if i save in on-board profile .

Hello. Does anyone know if there are any available upgrades/downloads for the Basilisk V 3 mouse that would match it up to use with MS Dynamic Lighting feature??Upon checking here with Razer’s compatibility listing, my model’s not listed. GetHub as well does not list it either. I’m using the Monster Smart Lighting Flow Light Strip’s at present and having difficulty with it installing the App’s Desktop App and my 2.4G Wi-Fi setup install.

I took out the original broken ttc encoder and threw it without measuring xd yeah... I'll be ordering from aliexpress and there are different heights 7,9,10,11mm but idk witch one. Thanks!!!

I use the Razer Viper v3 Pro, white version. I seem to have this reoccuring issue where my sensor has microstutters. I have the firmware  v1.12.01_r1. This doesn’t happen on other mice, I have tried cleaning the mouse sensor, and I have tried other mousepads. This is also my second copy of the mouse, I previously ordered one on amazon and had the same issue. 

Hi, I've had my mouse for a few years but recently I have started to notice more issues with not clicking and not holding a click consistently. It has had an issue of double clicking when I click once for a while but the other 2 are newer. Is there any fix or is it time to replace the mouse?

Hello guys, I'm looking for a great mouse that have not only vertical scroll but also horizontal scroll ( to scroll horizontal timeline in music / video editing software ). Ideally it would be wireless as well ( : Thank you

I appreciate the Replacement Parts page on the main Razer website, however which of these USB dongles is the correct one for my Razer Mamba? If it is this: https://www.razer.com/replacement-parts-mice/Razer-Mice-Keyboards-USB-HyperSpeed-Dongle/RC30-03420100-R3M1 Why don’t you list all the compatible products that work with that?!?! I’m supposed to just guess? My original dongle does not say HyperSpeed, so I’m not sure if that is the correct one. I do not see any other that would be the correct one. Please assist.

Hey there, I have got the Razer Basilisk Hyperspeed X since august and I am having some weird issues. Before I've updated the firmware of the mouse, the mouse got into the standby mode after just a few minutes. It did reconnect after a few seconds of moving the mouse, but it was way to frequent. I thought, hmm ok I should try updating the mouse. After the update... the mouse showed disconnecting issues (that is even worse). Sometimes the mouse just disconnects and doesn't show in the Razer Synapse anymore. It's just gone lol. Even after plugging the receiver into another USB-port. The only thing that works is re-inserting the battery. Thank god it doesn't happen every few minutes, but it's terrible when it happens :/ Anyone has a fix? I've already changed the power settings of the USB-ports, tried removing the mouse drivers in the device manager.... nothing seems to fix this problem. I am also having mouse look issues in games, while pressing the right mouse button sometimes, the came

hi there,i use razer naga pro v2 about 3 month until  now. have a question about low power indicator.i ever use naga pro v1 and cobra pro before, if these mouse battey level reach low level,  razer rgb logo  will blink red repeatly.  but this naga pro v2 i use until 3% battery level,  lighting still static depending light setting i use, it not blinking red for give us a warning for low power and need to charge it asap. but if i log out synapse it will blinking indicate mouse  in low power. i try update synapse today from synapse 3 to 4, and give same result. power already low. but low power indicator not working if synapse on.please need advice for fix this problem

So for some reason Razer has stopped catering to people that prefer heavier mice and the build quality is no longer as good. Does anyone know if it's possible to add mouse weights and change the mouse button switches? I like the shape and the sensor, but honestly every mouse after the Chroma series is a step down. Buttons aren't even nor responsive the way they should be. And yes, I've bought them directly on the Razer store, and I bought 2x Essentials, a DA Elite, V2 and V2 Special edition so it's not like I didn't try. I'd love to buy a couple of Chroma's if anyone knows a store (Amazon just has fake ones)

My mouse does not hold the click and often double clicks. It makes it impossible to game and even do regular computer activities.If anyone knows where to get it fixed that would be much appreciated.

I understand that this new iteration seems like it was mostly focused on cutting down the weight of the mouse, but at the same time as someone who is left handed losing the buttons on the right side of the mouse is the only thing that keeps me from purchasing this newer model. It's rather unfortunate since it seems like it has a lot of needed improvements over the viper ultimate and if they were to have a model with buttons on the right side this wouldn't be an issue at all. By any chance does anyone have any knowledge of whether or not they may actually manufacture a truly ambidextrous version of this newer version with buttons on both sides or at least on the right side?

HELP!!! The usb receiver (used for wireless range extension) on my charging dock for the Razer Viper Ultimate doesn't work. It's not registering the USB when it's plugged into it at all. Is there a way to fix this or is the charging dock just faulty?

I'm happy with this mouse, but I don't like the Sleep Mode. I don't play PC games and I don't use the mouse for a long time because I enjoy watching videos or playing console games for a long time. So I have to wake the sleeping mouse frequently. But this mouse takes too long to wake up. I plan on using rechargeable batteries so I don't need Sleep Mode. It's also okay if the battery's lifespan quickly decreases. Can't I disable Sleep Mode on this mouse?

I have a RAZER Atheris wireless mouse and I bought it almost a year ago. Just yesterday it was working fine. This morning I got up, and found out that it just doesn't work anymore. The mouse USB device has been detected by the computer. But for some reason the DPI light keeps flashing blue as soon as I turn it on, and when I try to move the mouse, it just won't move on the screen.

Hi I had an inquiry on the DeathAdder V2 X Hyperspeed! So, on the website it says it has 1 onboard memory slot to use these keybinds anywhere without software however when I connect to my other device the mouse switches to default settings. I don't know the exact procedure to have the keybinds save so I would really appreciate your help!

When I push down on the buttons they don't move there stuck the bottom one worked for like a day a few weeks ago but that's was the only time any worked I really want to fix this because it's my favourite mouse and it cost me ALOT of money

My mouse was working just last night but this morning when I turned on my computer it isn't moving or lighting up. Did the mouse just die on me or is there a way to revive it and save my money. If it helps I've only had the mouse for only 3 year and it didn't show any signs of dying or have any problems.

Hi, so I lost the box that came with my DeathAdder v3 pro before I put the grip tape on the mouse. I tried to find replacement grip tape but it’s not the same as the stuff that comes in the box. The grip tape on the store is a different shape. Doesn’t come with the same shape side grip tapes. is it possible to buy replacement grip tape? Will it be possible in the not so distant future? kinda upset lol

Looking to buy a Razer Viper, does anyone know the difference between RZ01-02550100-R3U1 vs RZ01-02550100-R3M1 The U1 is $139 on Amazon while the M1 is $89. It says the M1 is 120g? Links for those curious U1: https://www.amazon.com.au/Razer-Viper-Ultralight-Ambidextrous-Gaming/dp/B07TT8G59J/ref=sr_1_2?dchild=1&keywords=razer+viper&qid=1605788105&s=computers&sr=1-2 M1: https://www.amazon.com.au/Razer-AU-Ambidextrous-RZ01-02550100-R3M1-Renewed/dp/B07V6Z9RW4?ref_=ast_sto_dp EDIT: After checking the website it seems like the UK Razer website sells the M1 while the US Razer website sells the U1. Furthermore, the M1 on the UK Razer says it is 69g https://www.razer.com/eu-en/gaming-mice/Razer-Viper/RZ01-02550100-R3M1 https://www.razer.com/gaming-mice/razer-viper/RZ01-02550100-R3U1 I FEEL like the M1 is the AU one after googling a bit more but would like some more confirmation