[MONTHLY SILVER] August 2026 30,000 Silver Drawing
-
Recently active
Hi,Due to many questions and misunderstandings I’ve created a small FAQ regarding 7.1 Surround and THX Spatial.It is important to understand that 7.1 Surround IS NOT THX Spatial. These are 2 different surround technologies.Before you create a new post on Razer Insider about 7.1 Surround or THX Spatial please use the search function and check below FAQ (and also manual included with the peripherals).Which headsets are 7.1 Surround supported?Full list is here: https://mysupport.razer.com/app/answers/detail/a_id/614 Which headsets are THX Spatial supported?List for Synapse 3 devices is here: https://mysupport.razer.com/app/answers/detail/a_id/13808The same devices + Kraken V4 / V4 Pro are supported via Synapse 4 software: https://www.razer.com/synapse-4 I’ve registered headset with RazerID, got 7.1 surround key, but getting “The code you have entered does not seem to be valid. Please try again”It’s likely you’ve installed THX Spatial app, instead Surround 7.1 app. Please uninstall THX Sp
It has come to our attention that there are people posing as fake Razer Support agents. Please do not engage with them and provide them with any information. We will be doing our best to route these users out. In the meantime, the best way to protect yourself is to check who you are engaging with.All of our Support Agents will have a little gear icon next to their names in the forum conversations. They will also only ask you to email razer.com domains. So, if someone is asking you to email an outlook, gmail or any other email domain other than razer.com, please report them immediately.If you don’t see an icon or are unsure, please reach out to myself or any of our Vanguards to confirm that who you are communicating with is our official support staff.Thank you.
Insiders!If your Razer Gold scratch card PIN is deleted or lost, you can try the following steps to recover or resolve the issue:1. Check for a Backup CopyIf you saved the PIN digitally (e.g., took a photo or noted it down), check your backup files. If the purchase was made online, check your email or purchase history for a digital receipt.2. Contact Razer Gold SupportIf you cannot retrieve the PIN, reach out to Razer Gold customer support:Visit: Razer Gold support page Submit a Ticket: Provide details such as: Proof of purchase (receipt, invoice, transaction ID) Scratch card serial number (if visible) Date and place of purchase 3. Contact the RetailerIf the card was bought from a store, check with the retailer. They might have records of the transaction and assist in resolving the issue.4. Avoid Unauthorized Recovery ServicesBe cautious of third-party services claiming to recover lost PINs. Only rely on Razer’s official support.
Hey Insiders, Have a phenomenal Support experience you’d like to share? Post in the Shoutout to Support Rockstars forum and you’ll be entered into a pool where we’ll be randomly rewarding Razer Silver to all those who share their story. The best part? You only have to share once to be entered into the pool! Be sure to be as detailed as possible, mention the names of those who helped you and have your case number handy (you don’t have to post your case number, but we may ask you to verify your case). Having a valid case number doesn’t increase your chances of getting Razer Silver, but it does help us verify your story and give credit to all those involved. A Few Rules:This is a forum for positive experiences. Negative posts will be deleted without warning. This is not the support forum. All posts requesting support or asking for technical assistance will be deleted. Repeat offenses may lead to a ban from Razer Insider. You only need to share your experience once to be eligible for t
Welcome to the Official Support forum on Razer Insider. Our goal is to help our community members as quickly as possible with as much information that is available to us. Please note that often times we encounter new bugs and issues as you do, and it takes time for us to investigate. Razer Insider is monitored by our Support staff, The Insider Team and our Razer Vanguards. Although we do our best to keep an eye on things there are times things may be missed.If you cannot resolve your issue through Razer Insider or it is something that needs immediate attention, please visit our Official Support site. Focus your threads to be as detailed as possible. It is crucial to stay on topic.Opinions and criticisms should be directed to the General Discussion forum. Please do not double post. Please do not hijack other threads by posting your own thread. This is not efficient and may lead to your support issue being missed or cause the original support thread to be ignored. Your subject must have
Hello Insiders,If you have any trouble with your Razer Gold code / voucher / scratch card - the only official way to contact Razer Gold Support is through GOLD.razer.com website only: http://gold.razer.com/ticket-inbox/submitBe aware, that some people are trying to scam - impersonating official Razer Gold Support.Razer never uses any e-mail ending with @gmail.com, @outlook.com and so on. Also phone support is NOT AVAILABLE - if someone post a phone number “to Razer Gold Support” - please DO NOT use it.The ONLY WAY to contact is through Razer Gold website → Help → Submit ticket. Thank you, and be safe.
Hey Insider! We are excited to announce that we have a new member joining our Insider Support Team. Let’s all welcome @Razer.ScarletRouge as part of our board patrollers together with @Razer.Ten, Razer.Aero, @Razer.sushi.boi, and Razer.ZionZedd!🥳 If you have any questions or concerns, feel free to send a private message or tag anyone from the group. Thank you! 🤝
so while using the Tartarus V2, the d pad sticks and you keep moving in one direction till u press the same direction again. I know a lot of people have this problem while looking through the forums and the one solution is to delete razer synaps. but unfortunately I use a lot of razer products and that's the best way to match and customize RGB. so its either I deal with that annoying glitch and have cool colors and effects. or i delete synaps and don't deal with that glitch but now half my RGB features are useless. I was hoping to bring this back to the attention of the developers to see if u can make a small patch for synaps so the people who use the Tartarus can enjoy there gaming and RGB lights at the same time. Please and thank you.
After updating synapse, there are problems with enabling thx spatial audio. When I click on thx spatial audio or stereo, the sound does not change.
My razer devices disconnect and reconnect out of nowhere. When it starts this cycle of disconnects and reconnects, it usually happens for several minutes straight. This is not a USB or motherboard problem. It happens to my razer keyboard and mouse at the same time. My Chroma lighting on my keyboard will revert to default color design when it disconnects, and then back to my preferred chroma settings when it reconnects. It disconnects and reconnects every couple of seconds until I reboot. Even if I plug my keyboard and mouse into different pots, the problem persists. I've tried plugging my mouse and keyboard into USB ports that I know don't have a problem, because I have other devices plugged into them that stay connected all the time. However, the problem persists no matter which USB ports I use. My mouse experiences the exact same problem at the same time, which makes it nearly impossible to use, because when it disconnects, I obviously have no input. It reconnects for a second or 2
I have a razor 15 base model and when I go to put my laptop into gaming mode, I am unable to because synapse is telling me that the laptop is receiving inadequate power which is stunting my performance. I have no every changed charging adapters and my laptop came with a 180W adapter. I also checked my battery life and it is at 96 percent, and have noticed zero swelling. I was wondering what I can do to fix this inorder to get the maximum performance out of my laptop.
Reproduction steps:- Updating synapse 4 to version 4.0.86.2508050339- Assign the analog button 08 to joystick down (Y+)- Assign d-pad down to a keyboard alphanumeric letter AWhat happened:- When pressing d-pad down instead of the letter A, d-pad down is outputWhat should have happened:- When pressing d-pad down the letter A should have been output
I have had this headset for at least 2 years, It's worked fantastically the entire time right up until a few days ago when it stopped connecting. headset works fine with the cable connection, I've tried to use the various utilities to fix it and none them of worked so i went to look for a new dongle online and could find nothing, then i saw other posts of people with the same problem. Can anyone help with solving this issue.
I recently purchased the Razer Basilisk v3 Pro and the Mouse Dock Pro. I'm having issues with the dock when booting into Windows the dock stops working my mouse is not detected even if I turn off the mouse and on again. The only way I can make the dock work is to unplug the dock and plug it back in. I have to do this every time I boot my PC. I also get the issue when my PC goes to sleep. When waking the PC I get the same problem. I have updated the firmware of the mouse and dock. But, this has no effect. I have also repaired Synapse and have done a clean install. Does anyone else have this issue on Windows 11?
Just yesterday, my headset was working fine including spatial audio. However for some reason today spatial audio isn't even being seen as an audio output option. In Synapse, I can toggle the spatial audio setting on and off, but it does not work. On top of this, the light indicator on my headset next to the button that toggles spatial audio no longer lights up. I cant find any reason why it would have stopped working so suddenly. There used to be an audio output option called “THX Spatial (Synapse)”.
Having the same issue as many others here - Razer Nari Ultimate worked fine for a long time now all of a sudden is rapidly disconnecting/reconnecting on PC/PS5 - causing playback issues and of course forcing me to use 3.5mm jack - reached out on twitter troubleshooted everything from the recovery tool to having my case escalated to “advanced support” but its been 5 days without replyUSB ports work for anything else just the headset keeps cutting out and its infuriating - please assist as this is my third locale for support
Hi there. I’m the owner of (so far) two Huntsman V2 Analogs. I fell for the marketing gimmick of the variable actuators, but that aside, I love them to bits. I use one, and my boyfriend uses another. My keyboard will, at seemingly random, repeat the last dozen keys or so that have been pressed in the last minute. The result is an infuriating situation where the keyboard will repeat windows key presses, enter keystrokes, alt-tab inputs (which makes games more interesting), grenade key (g) inputs (which makes games slightly more interesting), fire-mode selector (x) inputs (which makes games significantly more interesting), and spewing the last few seconds of conscious thoughts I’ve just typed a second time in an instant, trashing whatever sentence I’m trying to formulate. If that happens while I’m typing this, I’ll leave it in as an example.So it registers as actual inputs, so I immediately suspected hardware, or some kind of conflict. I haven’t noticed if the chroma lights respond to th
Razer please tell me this is a defective display or its how Mini LED technology implemented in this laptop and it's considered "normal".White objects on black that are smaller than 2cm turns grey. I recorded a video showing this problem.https://www.youtube.com/watch?v=IPL3ZBoIBrM
Hello I just bought myself a new Freyja for simracing. After installing synapse 4 and chroma app I could experience it with some music and it is great but when it comes to gaming I can’t make it work. Basicly it works with audio-to-haptics mode but when I change it to “sensa hd games” I don’t get anything. I tried some sim games with simhub also tried a sensa supproted game called screw drivers. There is also live effects test module on simhub, it doesn’t work there as well.
I have a BlackShark V2 SE that has been great up until Synapse updated today. After the update, the audio is noticeably quieter even with the same EQ settings. Additionally, trying to change the volume of Windows apps using Windows’ own audio mixer or a third-party mixer like EarTrumpet doesn’t work. I can move the slider up and down but the volume doesn’t change, except when it gets to zero, then it gets muted. I have Discord set up to attenuate sound when I or someone else speaks, which also doesn’t work as it relies on setting app volumes to do that.The only way I’ve been able to fix this is by disabling Audio Enhancements in Windows settings for the headset. With it disabled, I can once again control app volume and Discord’s attenuation feature works. However, I don’t get the benefits of any of the Synapse EQ settings or other features.I have tried the following:uninstalling Synapse uninstalling the device from Device Manager installing all Windows Updates updating all audio
My leviathan v2 speakers have been working great for a while now and all of the sudden, stopped working, they turn on and the source light is green, but my pc no longer detects the speakers whatsoever. i also cannot change them to bluetooth to connect my phone to them. i just cannot get anything out of them. i have tried updating the firmware but in order to do this, the device needs to be in bluetooth mode so i cannot update, i have tried reinstalling synapse and restarting my pc but still no luck. i left it a couple of days and suddenly the source light was solid red and pressing the buttons or holding them did nothing, i switched it off at the wall and then back on and im back to them being able to turn on and off but still cannot get them in bluetooth mode or cannot get my pc to recognise them.
Hello,Recently some keys (random) are double typing, which is very frustrating.I already did a firmware update, reset my keyboard to the default settings, check Windows keyboard settings, cleaned the keyboard.Nothing seems to work.Is there any solution to fix this? Thank you in advance.
This message is to the Razer Company. Ever since the last razer synapse update my Razer Freyja’s haptics has stopped working (my freyja is not broken). I’ve done everything in my power to fix this issue, even sending my freyja to you guys for a replacement just to get the new one and have the SAME ISSUE! Upon further inspection I’ve come to the conclusion that this is a software issue and many others also have the same problem. We all spent our hard earned money to support your company as well as enjoy this unique experience and we think its only fair your create an update ASAP to address and solve this major issue. Please response in a timely fashion to inform us of your plans to fix this. Please don’t earn a bad rep off of a simple fix.
Hello, I’m experiencing an issue with my new Blackshark V2 Pro 2023 model. I purchased and received it less than a week ago, made sure to apply all updates to both the headset and attached USB dongle, and am experiencing the following issue: Whenever I am streaming (game/show/movie/anything) in Discord, whoever is viewing the stream hears a buzz in the background. I quickly plugged in my old headset (non Razer, wired headset+mic) and the stream is no longer buzzing. My Windows is fully updated, the Razer headset is set as my default mic in windows, etc. I can’t think of any reason as to why the headset would be affecting stream audio. I have even tried muting my mic during stream. Also, the static/buzzing sound does not happen during regular voice calls in discord. I’ve also tested several other calling apps (teams, regular phone calls, etc) and have no audio issues. I have not tried streaming video on any other platform as I don’t really have another platform to test on. I’m not sure
I’ve had my razor kitty headset since Christmas 2021 and they’ve recently started disconnecting a lot with a popping noise. I’m not sure if it’s a razer synapse issue because it’s everytime I move my laptop slightly it disconnects like there’s an issue with the usb/wire that’s broken ?? Is there a way I can fix this if it’s a wire issue ? Kinda upset they’re not even that old and they’re already showing signs of wear and tear :(
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.