I fixed the drift on my TE-edition! | Razer Insider

I fixed the drift on my TE-edition!

  • 5 January 2019
  • 90 replies
  • 1141 views

So i had the same problems as everyone else with my controller from start, and updating it just made it worse.
few days ago i got so mad after getting killed in blackout because of the drift that i simply pushed down the right stick and blew my life into the controller, and i also pulled and pushed the sticks up and down in the socket.
Havent had any drift since then, my guess is that there is somekind of dust inside from production, making the sensors inside the controller go wild?

This worked for me, and i hope that is working for at least some of you.

1. push down the sticks and blow hard into the sockets
2. pull and push the sticks in/out of the sockets ( i was mad so i did it really hard, be careful 😃 )

Hope it helps!


Edit: i did not have the beta firmware installed

This topic has been closed for comments

90 Replies

JenyaMetan
Thx, I try it right now, but nothing happens( I was try at wired/wireless mode, have a feeling I still do smth wrong ) I just need connect to pc by usb and press buttons, correct ?

I did mine without connecting it to the pc but try it in many different ways, try it in all modes to see what works, my first times it did nothing but a bit later on it bootloaded with the first try.
Here's what i did:


Open the 1.01 updater on your computer. Make sure it's ready to receive the controller. Press cancel when the popup about the synapse software displays.


Put your controller in usb mode.

With one hand press and hold d-pad up, and hold down the X button.


Now, with your other hand connect the usb cable.


The controller now goes into bootloader mode and will begin installing the 1.01 firmware.


Wait untill it's completely done.


Now disconnect, and install the 1.03 firmware.
Great update guide and fixing drift issue guide Nicejob guys. I have also negative experience with ultimate edition.
First had big stick drift (after update to 1.02 controller was unplayable).
Second one had small drift and right analog had some lag when I try to look right, looking left was ok. Update not solved issue.
Third one work decent . Incidentally lag on sticks and small drifting is well playable on basic firmware 1.01
I updated the firmware to 1.3 and at this point razer is issue free but I had no time to test...
I will also keep you up to date
Regards Filip

Ps sorry I know my English is terrible....
and after few days of testing unfortunately i have to say that is again worse ... Controller is playable but on basic firmware i have almost not lag small drifting and now it lag persist (sometimes is noticeable )
pity
Filip
FilipMvP
and after few days of testing unfortunately i have to say that is again worse ... Controller is playable but on basic firmware i have almost not lag small drifting and now it lag persist (sometimes is noticeable )
pity
Filip

7nightwing7 RMA'd the controller (sent it back to razer with the warranty to get replaced with a new one) and he got a new one with a v1.04 firmware that fixed everything and his controller is working perfectly now. So we are asking for that firmware but no one is answering, im also gonna RMA mine with razer too so i can get a new batch of controllers that have the v1.04 and also people said that it was out of stock for some time and people suggest they waited to replenish the stock till they introduced the new batch. So at least there's hope in the horizon, in case we EVER get the firmware v1.04 but i say just RMA it.
stavrosmangaros
7nightwing7 RMA'd the controller (sent it back to razer with the warranty to get replaced with a new one) and he got a new one with a v1.04 firmware that fixed everything and his controller is working perfectly now. So we are asking for that firmware but no one is answering, im also gonna RMA mine with razer too so i can get a new batch of controllers that have the v1.04 and also people said that it was out of stock for some time and people suggest they waited to replenish the stock till they introduced the new batch. So at least there's hope in the horizon, in case we EVER get the firmware v1.04 but i say just RMA it.

Can confirm, day 3 still going strong. Tested on Anthem vip demo. Love this controller.
7nightwing7
Can confirm, day 3 still going strong. Tested on Anthem vip demo. Love this controller.

at least that takes the desperation away because there's light in the end of the tunnel
7nightwing7
Can confirm, day 3 still going strong. Tested on Anthem vip demo. Love this controller.

Can u test also on battlefield or call of duty Bo4 (if you have a copy) ?
How long took the RMA process
FilipMvP
Can u test also on battlefield or call of duty Bo4 (if you have a copy) ?
How long took the RMA process

Already tested on battlefield 5. No probs. Rma took me a week. Pretty fast.
7nightwing7
Already tested on battlefield 5. No probs. Rma took me a week. Pretty fast.

Can I ask where are u from ?
FilipMvP
Can I ask where are u from ?



The netherlands. You are from belgium correct ?
I buy in Hong Kong razer webshop.
How to RMA?
7nightwing7
The netherlands. You are from belgium correct ?

I live in NL.
I ask support how to get rma or 1.04 firmware and...
,,Although I would like to clarify that new controllers do not have an firmware 1.04 installed as such firmware wasn't released yet."

so I'm going today to coolbue and try to rma it will see

Filip
Guys check this thread to read about the new batch and what u should do: /razer-raiju-ultimate-new-batch-v1-04.46548/

FilipMvP
I live in NL.
I ask support how to get rma or 1.04 firmware and...
,,Although I would like to clarify that new controllers do not have an firmware 1.04 installed as such firmware wasn't released yet."

so I'm going today to coolbue and try to rma it will see

Filip

check the thread above
Hi Guys!

Updated my Raiju Ultimate from 1.01 to 1.03.

It fixed the rightstick drift issue and had a noticeable improvement on the input response.

I connected my raiju Ultimate to my PC via BT and went to http://html5gamepad.com/.

Did alot of movements to test as if I am playing a game on PS4.

My raiju passed with a result of 0.00015 on all stick axis after the sticks went back to their
original position.

Also, Response from the other buttons are instantly reflected on the app.

Just sharing. Thanks All