Liquid Metall (Thermal Grizzly) | Razer Insider
Skip to main content

Liquid Metall (Thermal Grizzly)

  • August 29, 2020
  • 6 replies
  • 92 views
C
Hello, I would like to know if anyone has had experience with Thermal Grizzly Conductionaut? is the Vapor Champer made of pure copper? Does the liquid cause metal damage? Mfg Christoph
    B
    This topic has been closed for replies.

    6 Replies

    S
    • Suade8880
    • August 30, 2020
    You will get a little stain left on the surface which can be lightly sanded down to reapply new thermal when the next time is ready. Yes, it is pure solid copper the part where it is mounted on the die. Doing it right will have a tremendous affect on keeping the temps down.
    FiszPL
    B
    C
    • Christophus
    • Author
    • August 30, 2020
    Thanks for the answer, did you sell liquid metal yourself? the layer on the copper does that eat into the material? Best wishes
    Joikansai
    Vanguard
    • Joikansai
    • Community Ranger
    • August 30, 2020
    Christophus
    Hello, I would like to know if anyone has had experience with Thermal Grizzly Conductionaut? is the Vapor Champer made of pure copper? Does the liquid cause metal damage? Mfg Christoph
    Suade8880
    You will get a little stain left on the surface which can be lightly sanded down to reapply new thermal when the next time is ready. Yes, it is pure solid copper the part where it is mounted on the die. Doing it right will have a tremendous affect on keeping the temps down.
    Wait, according other user it’s copper nickel. /over-a-month-of-liquid-metal-on-2018-razer-blade-15-second-batch-copper-nickle-heatsink.44461/ I wouldn’t recommend LM on Blade laptops though, 5 years experience from various Blade 14/15 normal compound like artic or UC diamond will do the job just find, if you need cooler temperature limit the Turbo Boost is better than LM imo, less risk and easier to do.
    Razer Blade 14 2021 QHD 165Hz | Ryzen 9 5900HX| RTX 3070 100W | 16GB DDR4 3200MHz | 1TB l Razer Blade 15 Advanced 2018 FHD 144Hz | i7-8750H | GTX 1070MQ | 16GB DDR4 2666MHz | 256 GB Corev2 | RTX 3070 Zotac Twin Edge OC | Razer Book 13 2020 FHD | i7-1165g7 | Intel Xe 96EU | 16GB LPDDR4X 4266MHz | 1Tb GB Razer Core V2 | RTX3070 | Zotac TwinOC Razer | Blade Stealth 13 2019 FHD | i7-1065g7 | GTX 1650MQ | 16GB LPDDR4 3744MHz | 512 GB | | Blade 14 2017 FHD | i7-7700HQ | GTX 1060 | 16GB DDR4 2400MHz | 512 GB | Razer Blade Stealth V2 2016 12,5 QHD | i7-7500U | HD620 | 8GB DDR3 1866MHz | 128 GB | | Blade 14 2015 IGZO QHD+ | i7–4720HQ | GT970M 3GB VRAM| 16GB DDR4 2400MHz | 256 GB | Razer Edge 2013 | i5-3317U | GT 640LE | 16GB DDR3 | 128 GB | Razer Phone 2| Razer Phone L33T Edition
    FiszPL
    C
    • Christophus
    • Author
    • August 31, 2020
    Thanks for the quick responses. I have now used the Kroyonaut paste. How much does Liquid Metal bring in comparison? I would seal the processor with electrical tape and high temperature silicone for protection.
    gstsdw
    • gstsdw
    • Insider
    • August 31, 2020
    The heatsink / heatpipe isn't pure copper. It's a laminate / copper coating. Over time the liquid metal "could" eat at away at the thin layer of copper and possibly cause issues. It's an extremely slow process but it's still risky when it's not 100% copper. The liquid metal contains gallium and it's highly corrosive to aluminum and it will make it brittle over time or even completely dissolve it in some cases. Nickel platings are usually ok. It can have an effect on copper if it's a mixed amalgam of copper and some other unknown metal. I would just use the regular Kryonaut or the new kryonaut extreme. The risks of conductonaut are not really worth the very minimal gains you get on the blade.
    C
    • Christophus
    • Author
    • August 31, 2020
    Hello, thank you for the important information. I only have the Kryonaut not the extremes because it costs 90 euros :) Who would have the extremes and would sell something to Germany?
    CookiesCookie settingsAccessibility statement