巴塞利斯蛇V3的Hypershift模式混乱问题

在按清理过程修复过后（清理驱动固件等邮件提供工具），依旧存在设置HY按键模式后，在未按下HY开启按键时，鼠标始终处于HY模式中，例如无法切换滚轮模式而直接执行HY模式的宏功能。在重启电脑或者雷云软件后有一定概率恢复正常，也有可能不执行任何功能（既不切换滚轮模式，也不执行宏）。同时存在鼠标底部按键按下后无法切换配置文件的问题，在修复后有几率可以切换，但是指示灯始终为白色，即使执行的是红色的配置。在修复后尝试创作了很多新的配置文件，但是只要开启HY功能后，均会出现上述问题。
以上问题，在电脑处于锁定状态时，均不出现，可以正常切换配置，灯效也有切换，HY模式和普通模式均工作正常
 

Here is the translation of the content you provided, with a note that this is GPT's translation:

After the cleaning process has been fixed (such as cleaning the driver firmware and other tools provided by the email), the issue still exists: when the HY key mode is set, the mouse remains in HY mode even without pressing the HY activation key. For example, the wheel mode cannot be switched and the macro function of HY mode is directly executed. After restarting the computer or using ThunderCloud software, it may return to normal with a certain probability, or it may not execute any function (neither switching the wheel mode nor executing the macro). There is also an issue where the mouse bottom button does not switch the configuration file when pressed. After fixing, there is a chance to switch, but the indicator light stays white even when the red configuration is applied. After the fix, many new configuration files were created, but once the HY function is enabled, the aforementioned problem will occur.
This problem does not appear when the computer is locked, and the configuration can be switched normally. The lighting effects also switch, and both HY and normal modes work as expected.