Hi @all,

I soldered out the potentiometers (because of stick-drift). The result is ok, and the PCB looks still fine! But after the soldering tin was sucked away, I had to raise the old potentiometers very carefully with a small screwdriver step-by-step, for bringing them out. Then I visually missed the extremely small capacitor C34 (SMD) only for a second, and broke it. I’ll like to solder a new one on the PCB but I don’t know the capacity. Can anybody help?

The PCB board is “651000040220 V0.4 - Patricia T1 Main PCB - T=1.2mm” (see Pic):

An other view on C34 (huhh… I’ll clean up the place for C34 before soldering the new one):

The capacitor can be found near both sticks on the left side (because I guess, that C34 and C39 are identical).

The one on the right stick - which is fine - is called C39:

The view is, when you hold the PCB like you would sit on the console and play… and it’s on the upper side of the PCB, so you can see C34 and C39 while looking on the potentiometers (that are currently soldered out on the pics).