I have a Huntsman v3 PRO and have had issues for ages with the mouse all of a sudden locking on screen and starting to scroll or unable to select a windows.
I have a
i9 - 5080 - 64G Ram - 4T SSD
Checked keyboard for latest version of firmware software. 1.3
Left handed naga 1.0.3 - still get issue when removing the mouse and other mouse.
The system just had a fresh install of everything blanked and reinstalled everything from scratch. Everything is updated and it is still occurring.
I have tried multiple mice etc and worked out after plugging another keyboard in not getting the issue at all.
So it seems to be the keybaord...
Done the bottom to the keybaord….
Best fixes for Huntsman Pro (in order of effectiveness)
- Raise the Actuation Point (most effective fix)
- Open Razer Synapse → select your Huntsman Pro.
- Go to the Keyboard / Actuation tab.
- Increase the actuation distance on the W, A, S, D keys (try 1.5mm – 2.0mm or higher).
- Optical switches on the Huntsman Pro can be too sensitive at low settings and register false presses from vibration, heat, or slight debris.
- Clean the optical switches
- Pull off the WASD keycaps (use a keycap puller if you have one).
- Blast compressed air into the switches.
- Optional but better: lightly swab with 99% isopropyl alcohol on a cotton bud and let it dry fully.
- Optical switches get blocked by tiny bits of dust/hair very easily.
- Firmware + Synapse
- Check for a firmware update in Synapse.
- Fully exit Synapse (right-click tray icon → Exit All Apps) and test in WoW.
- If the problem disappears with Synapse closed, do a clean reinstall of Synapse.
- Factory reset the keyboard
- Hold Fn + Esc for about 5–10 seconds (lights should flash).
- This clears any corrupted onboard profile that can cause stuck inputs.
- Extra tips
- Plug the keyboard directly into a rear motherboard USB port (not a hub or front panel).
- Turn off Windows Dynamic Lighting if it’s enabled.
- Make sure no macros are bound to WASD.
