- 36,757 Threads
- 53,731 Replies
Hello everyone, I just bought a Razer Windowmaker for my iMac. And I cannot seem to get the Razer Synapse to connect to the keyboard. I downloaded Synapse 2 because 3 isnt compatible with Mac OSX yet I see. I have registered the product and created an account, but I have installed the Synapse 2 twice and it says "Please connect a Razer device." Even though what I am currently typing on is the keyboard itself. I am currently running macOS High Sierra version 10.13.1. If anyone can help me that would be great! Thanks.
Hi all, I am having serious issues getting my Asus PG278Q external gsync monitor working with my 2018 Razer blade advanced (with the 1070 max q gpu). So my question is does my laptop/gpu combo support gsync on an external monitor when using the displayport port? If I plug the monitor into the display port the monitor appears in both the intel control panel and sometimes it may appear as a gsync compatible monitor in the nvidia control panel, but i cannot whatever i do get a signal to it, ie the screen is always black. I have now tried 3 cables.It will sometimes crash if i try to span or mirror to the external screen meaning a hard reset of the laptop required. Using the monitor attached to the thunderbolt port has also been a nightmare, with many crashes, corrupted screens and now after a bios + ec update (neither of which were available on the downloads page) and a complete reinstall of windows i can get a signal to it, obviously no gsync this way but for some reason at first it w
So, since this last round of updates, I'm not sure what Razor did, but something screwed up. Each time I turn on my PC, razor creates a new profile called desktopxxxxxxxx and makes that my default profile selection for all my devices and then I have to go through, delete all this desktopxxxxxx non-sense and reselect all my profiles. What can I do to stop this?
I have a razer turret keyboard which is no longer able to enter pairing mode. I switch it to c Bluetooth and press the power button for 3 seconds or longer. While I holding the power button, the light is solid blue. After depressing the lights return to flashing blue and red. I depleted the battery of the device by letting it flash for a few weeks until the battery was used up. Then charged it up, but the issue still remains. The device is not found when pairing. There is a way to put it into a developer mode by pressing esc and fn. This sets therefore blinking blue and can be found by my phone, but not useable. The device was paired to my Sony tv and my nvidia shield. Now it won't connect to either. I deleted the pairing from both devices. The turret mouse works perfectly fine. Any suggestions would be appreciated.
This last week I moved my Razer devices (Huntsman Elite, Tartarus V2, Naga Trinity) on to my new P52 Thinkpad and the problems started immediately. Synapse wouldn't recognize them. Uninstall reinstall same problem. Uninstall Synapse, uninstall all Razer drivers in device manager and unused associated mouse and keyboard drivers. Reinstall Synapse. Recognizes devices now. Mouse still freezes then jumps. Keyboard doesn't respond to first hit. Need to hit twice and then is often repeats until hit again. Tartarus has same problem as keyboard but only occasionally responds. The rest of the time it's dead to the world. Where to start? How to see where I have the contention issues?
Got an update. After update keyboard starting having extreme keyboard lag. I couldnt even type a sentence without waiting several seconds between keystrokes. At this time my Nari Ultimate headset was fine. Couldn't get the keyboard fixed so uninstalled and reinstalled Synapse 3. Now all profiles are gone for keyboard,Nari and mamba and the Nari Ultimate sounds like poop. Cant hear sound using stereo surround. Have to switch to Stereo. Also the volume at max is nothing like it was before and the haptic feedback just sucks now. Keyboard is working now though. Anyone have any ideas?
Hello! So having problems with my mamba so suddenly. The mouse is recognised by synapse 2.0 but moving the mouse or pressing any buttons doesnt give me any response. The mouse itself lights up in rgb spectrum so does the docking station. I've tried countless uninstalls and reinstalls of both synapse and all mouse drivers and still nothing its as if the mouse is dead but the led's still work, similar to this persons thread and symptoms: /mamba-suddenly-stopped-working.22209/ Also made sure all usb devices in device manager are unticked for the sleep option, I've tried using the mouse on two other laptops and have the same issues Any help, would be greatly appreciated. Thank you
Hi guys, I'm having a problem with my blackwidow keyboard when it comes to synapse lighting. When i try to use any of the effects along side with my Deathadder Elite and my Firefly, the lighting in the keyboard just goes off, and only the mouse and the mousemat displaying the light effect, the only time I can get any of the effects to work is when I go to the Keyboard tab in Synapse and then Lighting and turn off the Advanced effects, and put any of the quick effects on. So anyone could kindly help a friend here? :) PS: sorry for the bad englando, much love from Portugal ;)
I use headphones Kraken Tournament Edition After installing the synapse 3.0 drivers Razer Audio Controller and THX Spatial - Synapse give error (Code 52) related to a digital signature (I cannot verify the digital signature of the drivers required for this device. During the last change of equipment or software, an incorrectly signed or damaged file or malware of unknown origin). If you open the properties of the .sys files, then the signatures seem to be present. If I run Windows in the mode without verifying digital signatures, then everything works perfectly until Windows restarts. How to solve this problem?
Hi all, I basically studying abroad and let my Blade Stealth Book at home. Yesterday I powered it on - everything worked as expected...but then I came across the idea changing the SSD from 256GB to 500GB which I got for birthday earlier this week. Procedure: 1. Downloaded Windows 10 Media Creation Tool 2. Made USB install media 3. Change of SSD 4. Booting to USB Stick ### Here it becomes tricky...it boots and the BIOS checks for SSD (OK) and for the USB Stick (also OK)...But after the loading-dots under the Razer Logo are gone, the screen stays black. My best friend of mine has got a Razer 14 inch 2016 modell and the same applies there...if I want to reinstall it it wont work. After placing the original SSD back inside, everything works again. Best regards, Robert
Hi there... I have a challenge for u all, synapse 2 has lost my Naga Epic Chrome mouse and no amount of me uninstalling restarting and reinstalling or what not has made one bit of difference. I moved the PC from one room to another yesterday and after firing it up again Synapse 2 had managed to loose the mouse :eek_: so of I go scouring the intrawebz to find a solution to this problem, thinking mehh it will sort it self out soon after some minor fiddling with updating drivers at the most. . . How wrong I was, I've been solidly been working on this for over 5 hours today and that is not to count the time I used yesterday. From what I find on the Internet is that this is a old as fxxk issue, and wonder how it can be that there isn't a proper workaround or guide on the Razer.com website. So therefor I'm hoping some kind hearten nerd can help me along so I can go back into my hole and play my damn games without redesigning my years old setups for my mouse and keypad. Setup would
I just purchased a new Razer Keyboard the Cynosa Chroma edition and have tried multiple times to install Synapse 3 and it keeps popping up with this error every time i try to install 1532494580S1IVvCUwRzerSynapseDependenciesSetup_v3.3.00725.072507.Exe Installation Failed with error code: 2 Please, anyhelp would be greatly appreciated -Josh
Hey guys, I've had my DeathAdder Elite for about 6 months now and scroll click stopped working today. Everything works fine. I could scroll up and down without any problem. Only middle(scroll) click doesn't work. I am not a gamer so I don't stress the mouse too much. I use the mouse about 4-6 hours a day and I use middle click mainly to open up a new tap on chrome. Adult owned. When I click the middle button, I could hear the micro switch getting pressed and depressed without any issue. I don't know what the problem is. Is this a common issue with this mouse? I never knew that middle button is this important. Now that it doesn't work, it slows down my work a lot.
Hi. I had my Razer Blackwidow chroma v2 keyboard for a pretty long time and I re=downloaded razer synapse one day because it wasn't working and suddenly, my x and s keys are off color. Sometimes, they have somewhat correct tints of the color I was going for, but usually, it is a completely different color. For example, when I do spectrum cycling, both keys attempt to change to the intended color but they always have a different color. It is quite weird to be honest. Any solutions?
Setup - Xbox One - Razer Ripsaw HD - PC - OBS + brio webcam + AT2020 XLR mic (All working) - Razer wolverine ultimate controller + Astro A10 headset (connected to the controller) I have the video working, the game audio working, I have an XLR mic connected through my pc so my mic works... but I can't get game/party chat voices at all. Also, sometimes when I record there's a small popping/clicking noise in the background. Can someone help me???
So I noticed a HUGE bug with whatever is causing from razer synapse 3, I'm not sure if anyone else has this My problem: I've been experiencing a lot of CPU heavy loads from this specific thing, and whenever I look at my CPU it has a lot of the time next to 350 000+ handles that keep on going up (average being 80 000). It slowly takes up my CPU load from 0 to 20% and slowls down my whole computer obviously.. Once I restart it by force shutting it down, it's back to normal.. The only thing that could cause this, would probably be Razer synapse 3? ..since I just tested it out by reinstalling my whole windows to mainly fix this. So if anyone has any clues on what the hell this is.. would be nice, otherwise I'm also contacting razer support for this.
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.