Hello Razer Support,
I am contacting you regarding my Razer BlackWidow V4 (RZ03-0469, Yellow Switches), which suddenly stopped functioning during the installation of Razer Synapse.
The keyboard was working normally before the installation. During the process, it became completely unresponsive.
Current symptoms:
-
The keyboard does not power on or illuminate when connected normally.
-
Windows does not detect the keyboard under normal circumstances.
-
The same issue occurs on another computer.
-
When I hold the Fn key while connecting the USB cable, Windows detects a device with the following hardware ID:
-
VID: 1532
-
PID: 110E
-
-
This appears to be the Razer bootloader.
Troubleshooting already performed:
-
Tested the keyboard on another computer.
-
Tested different USB ports and a different USB-C data cable.
-
Attempted the keyboard reset procedure using ESC + Caps Lock + Space.
-
Downloaded and ran the latest official BlackWidow V4 firmware updater (version 1.05.00).
-
Attempted firmware recovery while the keyboard was detected in bootloader mode.
Unfortunately, the official firmware updater fails immediately at 0% with the following error:
"Firmware update failed. Please reconnect your device and click retry."
I suspect that the main firmware may have become corrupted, while the bootloader remains functional.
Since my keyboard is no longer under warranty, I would like to ask whether Razer can provide:
-
A dedicated firmware recovery utility compatible with the RZ03-0469.
-
A recovery firmware package that supports flashing directly from bootloader mode (VID_1532 / PID_110E).
-
Any alternative official recovery procedure that could restore the keyboard without requiring hardware replacement.
I would greatly appreciate any assistance, as the keyboard stopped working during the installation of Razer's own software and was functioning normally beforehand.
I can provide screenshots of Device Manager, the hardware IDs, and the firmware updater error if needed.
Thank you for your time and assistance.
Best regards

