This message is to the Razer Company. Ever since the last razer synapse update my Razer Freyja’s haptics has stopped working (my freyja is not broken). I’ve done everything in my power to fix this issue, even sending my freyja to you guys for a replacement just to get the new one and have the SAME ISSUE! Upon further inspection I’ve come to the conclusion that this is a software issue and many others also have the same problem. We all spent our hard earned money to support your company as well as enjoy this unique experience and we think its only fair your create an update ASAP to address and solve this major issue. Please response in a timely fashion to inform us of your plans to fix this. Please don’t earn a bad rep off of a simple fix.
Razer Synapse Updated Destroyed My Razer Freyja
Hey guys, I found the solution it seems. It has to be a conflict with another RGB app you may have on your PC. For me it was because of SignalRGB. Completely turning off SignalRGB seems to have the issue, I might be able to fix it and let them both work together but I’m not sure yet.
keep everyone updated please.
Yes, I can confirm it works just fine after ending task on SignalRGB. After the Freyja starts working, I simply launch SignalRGB again and it’s all good.
I’ll do some more testing tomorrow and come back with an update, otherwise I might give up on SignalRGB and try OpenRGB to see if it makes a difference.
Yes hopefully your solution works after 24 hours, plz let us know. I ask because everyone’s solution so far including mines only last for a short moment before it starts to act up again.
Yeah I really doubt that it’s fully fixable… this is just a bandaid solution to one of the many problems Razer has to address, starting with its bloaty software and various apps that could be easily incorporated into one.
I think at this point more WE all got their attention and they have no choice but to prioritize a fix asap. Crazy thing is I’m sure it’s a simple fix on their end. They owe us some free Razer products.
Hey guys, I found the solution it seems. It has to be a conflict with another RGB app you may have on your PC. For me it was because of SignalRGB. Completely turning off SignalRGB seems to have the issue, I might be able to fix it and let them both work together but I’m not sure yet.
keep everyone updated please.
Yes, I can confirm it works just fine after ending task on SignalRGB. After the Freyja starts working, I simply launch SignalRGB again and it’s all good.
I’ll do some more testing tomorrow and come back with an update, otherwise I might give up on SignalRGB and try OpenRGB to see if it makes a difference.
Yes hopefully your solution works after 24 hours, plz let us know. I ask because everyone’s solution so far including mines only last for a short moment before it starts to act up again.
Yeah I really doubt that it’s fully fixable… this is just a bandaid solution to one of the many problems Razer has to address, starting with its bloaty software and various apps that could be easily incorporated into one.
I think at this point more WE all got their attention and they have no choice but to prioritize a fix asap. Crazy thing is I’m sure it’s a simple fix on their end. They owe us some free Razer products.
Buying a decently expensive piece of tech to use it as a cushion is indeed pretty insane to say the least. You’d think that such an issue would be fixed within hours and would be of the utmost importance. Razer doesn’t care, that’s the reality of 99% of all support interactions with them.
Hey guys, I found the solution it seems. It has to be a conflict with another RGB app you may have on your PC. For me it was because of SignalRGB. Completely turning off SignalRGB seems to have the issue, I might be able to fix it and let them both work together but I’m not sure yet.
keep everyone updated please.
Yes, I can confirm it works just fine after ending task on SignalRGB. After the Freyja starts working, I simply launch SignalRGB again and it’s all good.
I’ll do some more testing tomorrow and come back with an update, otherwise I might give up on SignalRGB and try OpenRGB to see if it makes a difference.
I’m not using SignalRGB. My RAM and fan lighting are RGB and connected only to the motherboard, but I haven’t installed any software to control them yet since I recently did a fresh system install. Freyja still isn’t working.
Hey guys, I found the solution it seems. It has to be a conflict with another RGB app you may have on your PC. For me it was because of SignalRGB. Completely turning off SignalRGB seems to have the issue, I might be able to fix it and let them both work together but I’m not sure yet.
keep everyone updated please.
Yes, I can confirm it works just fine after ending task on SignalRGB. After the Freyja starts working, I simply launch SignalRGB again and it’s all good.
I’ll do some more testing tomorrow and come back with an update, otherwise I might give up on SignalRGB and try OpenRGB to see if it makes a difference.
I’m not using SignalRGB. My RAM and fan lighting are RGB and connected only to the motherboard, but I haven’t installed any software to control them yet since I recently did a fresh system install. Freyja still isn’t working.
I don’t know what to say, I completely managed to fix it.
I also don’t know what you have or don’t have on your PC, but it’s very possible that another app is interfering with Synapse/Freyja.
FIX (at least for now):
I set SignalRGB’s CPU affinity to the lowest possible from Task Manager and I also disabled add-ons and ignored devices that Synapse could already handle.
If this doesn’t work for you guys, keep tweaking SignalRGB or whatever other RGB app you may have. Make sure Synapse is always the priority.
Finally I found a solution razer released new patch on razer synapse 4 beta at least 2 month later I was able to use freyja properly
here is the razer link
Finally I found a solution razer released new patch on razer synapse 4 beta at least 2 month later I was able to use freyja properly
here is the razer link
How long has this method worked for you?
Finally I found a solution razer released new patch on razer synapse 4 beta at least 2 month later I was able to use freyja properly
here is the razer link
How long has this method worked for you?
Step by step I tell you what I did exactly
first I did read previous solution about signalrgb app I installed app (its all in one rgb) its controlling all rgb while inactivating other app it’s conflict with other app then I uninstalled it and also uninstalled the synapse 4 (perhaps I uninstalled and installed synapse 4 20 or 25 times along 2 months)and while using driver clean up tool and I removed previous drivers (https://rzr.to/igxb6b) after that I installed synapse 4 but freyja still has no function then I searched about synapse 4 beta and without uninstall synapse 4 I ran synapse 4 beta exe after installation or updating synapse 4 beta ,razer cushion finally has worked after 2 months later I tested it along 3 hours on battlefield 6,resident evil and red dead redemption 2
can you check in synapse app in customization menu cushion has vibration ?
my problem was cushion powered and connected green light on ,adjusting vibration zone its working but in games or sounds it has no function
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I’ve taken your advice, hopefully this is a permanent and not temporary fix. Thanks 🙏🏽
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I’ve taken your advice, hopefully this is a permanent and not temporary fix. Thanks 🙏🏽
Did it work for you ? I guess we will be able use cushion without issue until synapse 5 released
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I’ve taken your advice, hopefully this is a permanent and not temporary fix. Thanks 🙏🏽
Did it work for you ? I guess we will be able use cushion without issue until synapse 5 released
I tried and it only worked for 5 mins and stopped. Whats interesting is I see that we all have several issues with the Freyja, some not working at all and some off and on. My issue isn’t that it doesn’t work at all it’s that it’ll randomly stop working. For me what I do now for a quick fix is pull up the task manager, then under the apps that are running find HAPTIC SERVICE, once you do right click it and click END TASK. After doing so 9/10 it’ll start working again. Though it may stop working again after a while that’ll get it working again. Give that method a try, hopefully that’ll work.
I uninstalled Synapse 4 and reinstalled it as a beta version. It started working for me in both Sensa HD and Audio versions. I checked Sensa HD with Simhub and it worked perfectly in AC Rally. I hope it doesn't break again because I bought this product with pleasure and want to use it.
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I’ve taken your advice, hopefully this is a permanent and not temporary fix. Thanks 🙏🏽
Did it work for you ? I guess we will be able use cushion without issue until synapse 5 released
I tried and it only worked for 5 mins and stopped. Whats interesting is I see that we all have several issues with the Freyja, some not working at all and some off and on. My issue isn’t that it doesn’t work at all it’s that it’ll randomly stop working. For me what I do now for a quick fix is pull up the task manager, then under the apps that are running find HAPTIC SERVICE, once you do right click it and click END TASK. After doing so 9/10 it’ll start working again. Though it may stop working again after a while that’ll get it working again. Give that method a try, hopefully that’ll work.
I'm still using it without any problems; you should install the beta version and remove all LED services.
I've been using it without any problems for 5 days.I shared my thoughts on Frejya on Reddit; I'm still playing BF6 with Sensa HD even now.This works in the current beta version.
https://www.reddit.com/r/razer/comments/1rsgnx3/comment/ojru42s/
I’ve taken your advice, hopefully this is a permanent and not temporary fix. Thanks 🙏🏽
Did it work for you ? I guess we will be able use cushion without issue until synapse 5 released
I tried and it only worked for 5 mins and stopped. Whats interesting is I see that we all have several issues with the Freyja, some not working at all and some off and on. My issue isn’t that it doesn’t work at all it’s that it’ll randomly stop working. For me what I do now for a quick fix is pull up the task manager, then under the apps that are running find HAPTIC SERVICE, once you do right click it and click END TASK. After doing so 9/10 it’ll start working again. Though it may stop working again after a while that’ll get it working again. Give that method a try, hopefully that’ll work.
I'm still using it without any problems; you should install the beta version and remove all LED services.
No need. Unless that helps you. Beta is the place to be right now. Hopefully we see an update soon because I found adjusting apps in Windows volume mixer makes haptics output inconsistent.
I just download the Synapse Beta 4 and everythings is working perfect. Lights, haptics, eq’s everything. I hope they do not broke final version.
I just download the Synapse Beta 4 and everythings is working perfect. Lights, haptics, eq’s everything. I hope they do not broke final version.
How long has it worked so far?
I just download the Synapse Beta 4 and everythings is working perfect. Lights, haptics, eq’s everything. I hope they do not broke final version.
frejya dont' work on synapse4，then reinstall synapse4 beta，frejya work again？
but on my pc （ROG Strix SCAR 18），ever since last synapse4 update on april， frejya can‘t work both in synapse4 or beta.
frustrating…...
frejya HD paptics just start to support battlefield6 early this year, and it HD experice much greater than audio haptics.
can razer pay more attention and fix this bug? i want my HD haptics back…...pls.
frejya HD paptics just start to support battlefield6 early this year, and it HD experice much greater than audio haptics.
can razer pay more attention and fix this bug? i want my HD haptics back…...pls.
frejya HD paptics just start to support battlefield6 early this year, and it HD experice much greater than audio haptics.
can razer pay more attention and fix this bug? i want my HD haptics back…...pls.
We have to keep speaking on the issue, so much that they have no choice but to prioritize fixing this issue.
I just download the Synapse Beta 4 and everythings is working perfect. Lights, haptics, eq’s everything. I hope they do not broke final version.
frejya dont' work on synapse4，then reinstall synapse4 beta，frejya work again？
but on my pc （ROG Strix SCAR 18），ever since last synapse4 update on april， frejya can‘t work both in synapse4 or beta.
frustrating…...
my device began to work after synapse 4 beta patch I tried it on first week of may
i suggest you uninstall synapse and remove driver by using razer driver cleaner tool and reinstall synapse 4 beta and close windows audio enhancement I hope it will work for you
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.