Balde 15 Base Model - M.2 nvme SSD Interface
Hello,
im affraid this has been asked before, but I could not find an answer to my question, so my apoligies
if so.
I bought the Blade 15 base @ 256GB SATA nvme ssd + 2 TB HDD. I now plane to upgrade the SSD but couldn find any sepcs to the m.2 socket, if it can handle ssd drives with higher bandwith as SATA 3 speaking of pciex4.
So in short:
Can the Blade Base Model with its m.2 socket handle nvme drives via pcie x4 @ 3.xxx GB/s isntead of SATA 3 @ max 5XX MB/s ?
Greetings,
Daniel
This topic has been closed for replies.
Greetings:smile_:
You have already nvme on that model, there’s no sata nvme ssd, either nvme or sata. So the answer yes.
You Are wrong. - Just watch your Image (Massenspeicher/ Deutsch hm ?)
It says "128 GB SSD (SATA-III).
A M.2 Socket can provide either SATA protocol or connect via pci-e x1<->4.
Depending on if it is a Socket B- or M- Key (5 or 6 Pin) it can Provide either SATA, pcie or Both.
M-Connector with 5 Pins seems to provide both:
For what I found out - Thre Blade Base Model has a 5 Pin-Connector aka M-Key Socket.
This should result in being able to run at pciex4.
I bought a drive and expect it to arrive tomorrow - I will report
For what I found out - Thre Blade Base Model has a 5 Pin-Connector aka M-Key Socket.
This should result in being able to run at pciex4.
I bought a drive and expect it to arrive tomorrow - I will reportNforcerinoDid you buy 128gb the cheapest one or 256gb, I’m pointing Model that you mentioned, 256gb it’s nvme. Cheaper 128gb comes with sata and after that I marked is with nvme, sata is slower with max 600MB/s and and later is depends on brand for example 970Evo is around 3GB/s I’m talking about reading speed. About socket idk quite specific, but your Blade capable to run both Sata and nvme.
You Are wrong. - Just watch your Image (Massenspeicher/ Deutsch hm ?) It says "128 GB SSD (SATA-III). A M.2 Socket can provide either SATA protocol or connect via pci-e x1<->4. Depending on if it is a Socket B- or M- Key (5 or 6 Pin) it can Provide either SATA, pcie or Both. M-Connector with 5 Pins seems to provide both:
I bought the one with 256 ... So I was lucky one could say.
I installed the new drive and tested.
Here are the results:
Samsung MZ-V7E1T0BW SSD 970 EVO 1 TB
Rated Read 3.300 MB/s | Write 2.500 MB/s
So it seems to be performing within range :)
Samsung MZ-V7E1T0BW SSD 970 EVO 1 TB
Rated Read 3.300 MB/s | Write 2.500 MB/s
So it seems to be performing within range :)Hi All, has anyone done an Nvme ssd on 128 GB version? I have one and want to confirm that I can plug the Nvme instead of my current 128 GB. on RB support they confirmed that I could but you never know. thanks
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.