Razer Raiju Tournament Edition new batch, v1.04
hello.
So, Ive had the infamous stick drift issue, and replaced my controller three times. I tried updating FW etc, but nothing helps.
Now, I returned my controller for a refund to gamestop, and ordered one from Razer directly, as the CS agent told me I would get a new one, with some HW modifications and a new FW. I sure hope the new controller I get today is working, but reading about the Raiju Ultimate v1.04’s the stick drift and dead zone problems are gone.
I will update this every day so you know how it performs
This topic has been closed for comments
So, got my controller, v1.04 confirmed and working (2hrs tested)
techCORAL138Okay, i just thought ... ", but reading about the Raiju Ultimate v1.04’s the stick"
Tournament edition as the topic clearly says
techCORAL138Give it more testing. Some people reported drift re-occurring after a few days of use. I would hold my breath for a proper fix.
So, got my controller, v1.04 confirmed and working (2hrs tested)
Pic shows 1.04 version in the razer updater (didnt know how to check otherwise)
Ordered from razer store on monday at about 16.00, and 49hrs later I had the controller. Shipped from Hong Kong
techCORAL138Are you located in the USA?
Pic shows 1.04 version in the razer updater (didnt know how to check otherwise) Ordered from razer store on monday at about 16.00, and 49hrs later I had the controller. Shipped from Hong Kong
techCORAL138can't wait to use my new one tonight so Excited !
Still going strong. No latency, no drifting, no dead zones etc. Working like a dream
I have already tried five Razer raiju TE and all equally bad, it seems that the problem has to see that the sensitivity changes depediendo of some interference, if I turn off the mobile phone the sensitivity of razer raiju becomes more sensitive, if I turn on the mobile phone the sensitivity becomes slow, it is clear that the interference affect the device in USB mode too, I do not understand why this may be happening ?, this could be fixed with a firmware? if it is not like that the old lot will not have solution :(
Check your device version, if its 1.0-1.03 then its an old controller. If it is 1.04, then its the new model with hardware changes. Had mine now for a few days, nothing to complain about. Everything is working like a dream. Latency, sensitivity, no dead zones or stick drifting
Sí, si son del lote anterior, lo he intentado, pero aquí en mi área local todavía venden razer raiju TE del lote anterior, tienen problemas y continúan vendiéndolo. Descubrí que el problema se resuelve al poner el teléfono móvil en modo avión y en la configuración de PS4 en comandos solo de USB, ¿cómo puede estar pasando esto? pero si juegas en modo USB, debe ser que no hayas separado los canales entre Bluetooth y USB o que el hardware no sea compatible con las interferencias más comunes de un día a otro, puede ser la antena Bluetooth o algo así, No lo sé .
techCORAL138same good feeeling there. I receive my new model 1.04 and it's fire !!!
Check your device version, if its 1.0-1.03 then its an old controller. If it is 1.04, then its the new model with hardware changes. Had mine now for a few days, nothing to complain about. Everything is working like a dream. Latency, sensitivity, no dead zones or stick drifting
YoungLoupSee how it goes after 2-3 weeks. That's when mine started losing Bluetooth connection. Already in rma. Getting my replacement next week.
same good feeeling there. I receive my new model 1.04 and it's fire !!!
7nightwing7Oh. Now Im starting to get a bit worried. Did you have the Ultimate or Tournament? Well, anyways. The TE 1.04 is still going strong.
See how it goes after 2-3 weeks. That's when mine started losing Bluetooth connection. Already in rma. Getting my replacement next week.
techCORAL138I had the ultimate. But it was a faulty unit. Bluetooth start acting weird after 2-3 weeks. No stick drift or input lag. It was mainly the Bluetooth that kept losing it's connection. And the signal was very weak. As if i was playing with an infared controller. Every obstacle interfered with it. On wired it was perfect.
Oh. Now Im starting to get a bit worried. Did you have the Ultimate or Tournament? Well, anyways. The TE 1.04 is still going strong.
techCORAL138Where you get the 1.04 tho? I cant find it any where else
So, got my controller, v1.04 confirmed and working (2hrs tested)
techCORAL138Still good ?
Still going strong. No latency, no drifting, no dead zones etc. Working like a dream
There has been a silent hardware revision.
After speaking to customer service it seems the units with 1.04 on have slightly different hardware and this firmware is for these units only. So it is likely it will never come out for the existing units. They should have numbered it 2.04 to go with the V2 hardware.
in Poland you can buy. I received today version 1.04. Turnament have: RZ06-02610400-R3G1
7nightwing7Well. I had to RMA it. With USB it worked like a dream, but a 3meter gap between the controller and PS4 started to make a HUGE input lag. With USB its fine, but bluetooth is not. I should get my new one on monday, according to fedex
Still good ?
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.