Razer 17 Pro 2020 RAM Upgrade Options

I am still waiting for my HyperX 32 GB set (CL17, 2933 Mhz Jadec). I hope this would be a quick swap as 1, it has the same rated max memory speed for the 10th gen I7 and 2, it does not require an XMP profile to run that speed. Will update you once I get my set (Hopefully next week)

I bought the 32GB 3200 HyperX (1.2v) for my Razer 17 Pro 2020 and I've not had a single crash despite hours of play with MSFS 2020 which is an extremely demanding game memory-wise. Bios 1.04. Runs at 3200 even not selecting XMP profile in the bios (confirmed using HWiNFO64). I had the same crashes you did with the Ballistix 1.35V

I had less success with the HyperX 2933mhz memory and had more system crashes than the HyperX 3200mhz. The 3200 still crashed for me though. Running bios 1.04 and using the 2933mhz xmp profile was better but games still crashed.

Thanks for the replies guys, @rjkrejci it's interesting that you're not seeing any crashing, Battlefield 5 is far more demanding that Flight Simulator in my experience due to the massive difference in on-screen action and raytracing features. I won't be trying the 3200 again, I'm tempted now to try the Vengeance next!

sergeantash
Thanks for the replies guys, @rjkrejci it's interesting that you're not seeing any crashing, Battlefield 5 is far more demanding that Flight Simulator in my experience due to the massive difference in on-screen action and raytracing features. I won't be trying the 3200 again, I'm tempted now to try the Vengeance next!

I don't know the amount of stress the action and Raytracing puts on the System memory vs. the GPU and it's memory. MSFS 2020 has just a massive amount of textures and long distances. It's using 16-17 GB of RAM memory constantly while playing and I've had it running for many hours. Did you select the XMP profile or leave it at default? I left it at default, and it still runs at 3200.

Yes I tried the default XMP profile which is selected automatically at 3200mhz, I also tried the lower 2933mhz profile but no success, still crashes after about 15 minutes of gaming :slightly_sad:

Man I'm sick and tired of not getting any straight answers to this.... I'm in the same boat and Razer refuses to provide any answers.... I paid 5K for a laptop and there's no information about a simple thing like upgrading the ram??? Looking for 64GB.

COSMICFILMS
Man I'm sick and tired of not getting any straight answers to this.... I'm in the same boat and Razer refuses to provide any answers.... I paid 5K for a laptop and there's no information about a simple thing like upgrading the ram??? Looking for 64GB.

It's shocking isn't it, sadly this will be the first and last Razer that I'll buy, next time it's an Alienware for me!

Received and installed Kingston HyperX 32Gb (CL16-2933 Mhz) worked like a charm. I did have some black screen at the beginning and only the keyboard was lighting. It turned on and off (while screen is black) for a few times before it finally came to life. Stress test and game test passed.

Thanks mate, the worry is that I've tried the 3200 and it was fine at first until I pushed it via gaming, have you really pushed this ram since installing it? I've ordered the same ram tonight, I'll push it the same way as the 3200 and see how stable it is, I'll report back! If it fails, I'll send it back and try the Corsair 2666mhz instead...and if that fails then I'll sell the laptop because the only conclusion can be that it's sh*t...

sergeantash
Thanks mate, the worry is that I've tried the 3200 and it was fine at first until I pushed it via gaming, have you really pushed this ram since installing it? I've ordered the same ram tonight, I'll push it the same way as the 3200 and see how stable it is, I'll report back!

I have the 2Rx8 and correction, it is a CL17@2933Mhz btw...tested in with Forza Horizon 4, Star Wars Fallen Order, Prime95 blended (maxes the ram), Cinebench R20 and Geekbench 5 benchmarks...passed! I did have some black screens at the beginning which quite scared me but it worked after a while and went on to start windows. XMP profile 1 is same as the default and XMP 2 is 2666Mhz CL16

Hope this helps

Thanks mate, I have the same machine but with 2080 Super Max Q, good that you've pushed it so fingers crossed this ram will work for me too!

Yea, putting in new memory takes a few iterations of POST before it makes it to windows. Agreed, the first time it does it it's a little stressful.

Yeah agreed I remember that with the 3200 HyperX, the Crucial RAM however just hung on black screen!! Will report back once new ram arrives!

sergeantash
Yeah agreed I remember that with the 3200 HyperX, the Crucial RAM however just hung on black screen!! Will report back once new ram arrives!

Yea, I had to pull the CMOS battery to bring it back to life with the Ballistix, even if I put the memory it came with back in.

Yeah same here, took a long time to get it working again, disastrous!

Has there been an update? To help others the threads I'm tracking with this issue are In General /razer-17-pro-ram-upgrade-hyperx-impact-3200mhz-xmp-does-work-dont-buy-crucial.63951/#post-650519 In Systems /razer-17-pro-2020-ram-upgrade-options.64991/ /g-skill-ripjaws-series-64gb-will-this-work-on-my-razer-blade-pro-2020.65112/ In Support /razer-blade-pro-17-2020-ram-issue.59373/

Installed Kingston Hyper X 64 GP 3200 MHz ram into my Pro 17 2020 machine. On Bios 1.04, it would run ok, then hang up after a little bit. This behavior was unexpected as it ran fine on 32 Mhz. Behavior happened usually when using Adobe programs. After reverting back to 32GB Hyper X (2 16GB Sticks) issue again disappeared. Returned ram as I didn't feel like dealing with it at that point. Was too dependent on the machine operating stably to continue to mess around with it until I heard a definitive resolution.

That's interesting, I think that the smaller 16Gb HyperX 3200 sticks have a lower CL than the 32gb sticks right? Perhaps that's related. I'm testing the HyperX 2933 64Gb tonight, I'll report back!

sergeantash
That's interesting, I think that the smaller 16Gb HyperX 3200 sticks have a lower CL than the 32gb sticks right? Perhaps that's related. I'm testing the HyperX 2933 64Gb tonight, I'll report back!

Update us on the outcome. The Hyper Xs have a better latency (CL17) on 2933 Mhz and if google is right, it should be faster that a 3200Mhz running CL20.

Unfortunately not faster, see my post 1 and look at the benchmarks where the 3200 is far faster, the 2933 is a close second however.

Has anyone tried any of these? https://www.amazon.com/Mushkin-Essentials-Dual-Channel-Low-Voltage-MES4S320NF32GX2/dp/B08BYJXS5F/ref=sr_1_1 https://www.amazon.com/gp/product/B08B5VX8FH/ref=ox_sc_saved_title_4?smid=A2E6E99BFJUH5X&psc=1 https://www.amazon.com/gp/product/B089SKXG4V/ref=ox_sc_saved_title_3?smid=A2E6E99BFJUH5X&psc=1 amount of RAM is more important to me than CL timings so these having worse CL numbers isn't really an issue for me - I'm also wondering if the stability problems being reported with e.g. the HyperX is because of the better CL ratings?

Hi guys, I recently bought the HyperX 32 GB kit (HX426S16IB2K2/32) 1.2V running at 2666 MHz, the exact link is as below https://www.mwave.com.au/product/kingston-hyperx-impact-32gb-2x-16gb-ddr4-2666mhz-sodimm-memory-ac39451 I chose this kit because it seems that it would be most compatible with my Razer blade pro 17 (2020 version) based on this tread, albeit slower than the included 16GB 2933 MHz RAM. I got it 3 days ago (13/1/2021), installed it and it worked fine... until today. During web browsing on Chrome, it froze my laptop. I did a hard reset and it won't boot (black screen) and I can't even get to the BIOS menu. I thought my laptop was dead but I decided to change the RAM back to the original included RAM and it boots up with no issues. I've contacted Mwave for a refund/replacement and I'll update this thread when I hear back from them. In short, I do NOT recommend any of the Hyper X RAM. It seems to be a bad product or I just have a very bad luck.

Drop_bear17
Hi guys, I recently bought the HyperX 32 GB kit (HX426S16IB2K2/32) 1.2V running at 2666 MHz, the exact link is as below https://www.mwave.com.au/product/kingston-hyperx-impact-32gb-2x-16gb-ddr4-2666mhz-sodimm-memory-ac39451 I chose this kit because it seems that it would be most compatible with my Razer blade pro 17 (2020 version) based on this tread, albeit slower than the included 16GB 2933 MHz RAM. I got it 3 days ago (13/1/2021), installed it and it worked fine... until today. During web browsing on Chrome, it froze my laptop. I did a hard reset and it won't boot (black screen) and I can't even get to the BIOS menu. I thought my laptop was dead but I decided to change the RAM back to the original included RAM and it boots up with no issues. I've contacted Mwave for a refund/replacement and I'll update this thread when I hear back from them. In short, I do NOT recommend any of the Hyper X RAM. It seems to be a bad product or I just have a very bad luck.

I am using HyperX 32GB 2933 Mhz without any drama for 2 months now