Razer Blade Stealth Chassis warped | Razer Insider
Skip to main content

Razer Blade Stealth Chassis warped

Z
Hi all, Just a quick question and in possible need of some help/ suggestions. My razer blade stealth (end of 2016 model) has started to warp in shape. Both the back plate and the keyboard deck are curving in the same direction, raised in the middle. This is caused my laptop not to be able to shut properly and when put in the neoprene sleeve or transported in my bag the keyboard puts pressure on the screen. This is slowly starting to lead to screen damage and I am worried that it is going to cause more damage and end up destroying the screen. I am open to suggestions for solutions as of course the warranty has run out and I am not sure what to do. Appreciate it in advance. (sorry for poor quality pictures) This final picture is as far as the screen will close
yeet or be yeeted
Did this topic help you find an answer to your question?
This topic has been closed for comments

3 Replies

Joikansai
Vanguard
  • Joikansai
  • Community Ranger
  • 1955 replies
  • March 21, 2019
Maybe battery bulging, open it and take a look inside. If so, take off the battery ASAP and use without the battery until you get replacement battery, ac adapter isn’t too huge to carry around, or maybe you can use powerbank for light task on go (not tested yet but theoretically it should be able). If you use defective (bulged) Battery it may damage other parts inside, and if it broke the motherboard it’ll cost expensive.
Razer Blade 14 2021 QHD 165Hz | Ryzen 9 5900HX| RTX 3070 100W | 16GB DDR4 3200MHz | 1TB l Razer Blade 15 Advanced 2018 FHD 144Hz | i7-8750H | GTX 1070MQ | 16GB DDR4 2666MHz | 256 GB Corev2 | RTX 3070 Zotac Twin Edge OC | Razer Book 13 2020 FHD | i7-1165g7 | Intel Xe 96EU | 16GB LPDDR4X 4266MHz | 1Tb GB Razer Core V2 | RTX3070 | Zotac TwinOC Razer | Blade Stealth 13 2019 FHD | i7-1065g7 | GTX 1650MQ | 16GB LPDDR4 3744MHz | 512 GB | | Blade 14 2017 FHD | i7-7700HQ | GTX 1060 | 16GB DDR4 2400MHz | 512 GB | Razer Blade Stealth V2 2016 12,5 QHD | i7-7500U | HD620 | 8GB DDR3 1866MHz | 128 GB | | Blade 14 2015 IGZO QHD+ | i7–4720HQ | GT970M 3GB VRAM| 16GB DDR4 2400MHz | 256 GB | Razer Edge 2013 | i5-3317U | GT 640LE | 16GB DDR3 | 128 GB | Razer Phone 2| Razer Phone L33T Edition
R
  • Razer.RedPanda
  • Guardian of the Forest
  • 2054 replies
  • March 21, 2019
zilocker
Hi all, Just a quick question and in possible need of some help/ suggestions. My razer blade stealth (end of 2016 model) has started to warp in shape. Both the back plate and the keyboard deck are curving in the same direction, raised in the middle. This is caused my laptop not to be able to shut properly and when put in the neoprene sleeve or transported in my bag the keyboard puts pressure on the screen. This is slowly starting to lead to screen damage and I am worried that it is going to cause more damage and end up destroying the screen. I am open to suggestions for solutions as of course the warranty has run out and I am not sure what to do. Appreciate it in advance. (sorry for poor quality pictures) This final picture is as far as the screen will close
Hi there! Let me help you out with this. Can you send over the serial number of your Blade to me through a PM? Let's continue there.
Z
  • zilocker
  • Author
  • 4 replies
  • March 25, 2019
I unfortunately don't have a small enough screwdriver to take the back off. I'll have to go and see if i can buy one or order one. I have pm'd you red panda. Thank you both for your help
yeet or be yeeted
CookiesCookie settings

Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings