Razer Synapse 2.0 on macOS High Sierra issue
A
I had recently updated my razer synapse program for my mac, and about a day after, the application would open but it wouldn't load my configurations for my razer devices. It would only show the green buffering circle and I left like this for about a hour, and still nothing load4ed. If anyone can give me some help with this issue, it would be much appreciated. Thank you.
This topic has been closed for comments
Page 3 / 6
A
franctastic
[indent][indent][indent] macOS High Sierra 10.13.4 NO BETA[/indent][/indent][/indent]
everything remains the same
salut!
Just updated to 10.13.4 and surprisingly it's working on my system. I am able to control the lighting effects via Synapses. Hopefully it's gonna work on your system too.
dotsh
Just updated to 10.13.4 and surprisingly it's working on my system. I am able to control the lighting effects via Synapses. Hopefully it's gonna work on your system too.
You know what it's intermittent !! When it works it works but it does fail most of the times.
A
Just made an account on this forum to check if there are more problems and there they are.. :-)
I was using a nostromo fairly intense until a few weeks back my keybinds suddenly started to change throughout gameplay. So the button which was mapped to " 3 " suddenly gave " shift-3" . And during game I had to pull the connector out of the USB port and then it worked as intended. But not for long.
Could this be a problem with OSX and synapse as well ? Any thoughts?
Using High Sierra, iMac, Razer Synapse 1.82.35 btw with nostromo and naga epic mouse
I was using a nostromo fairly intense until a few weeks back my keybinds suddenly started to change throughout gameplay. So the button which was mapped to " 3 " suddenly gave " shift-3" . And during game I had to pull the connector out of the USB port and then it worked as intended. But not for long.
Could this be a problem with OSX and synapse as well ? Any thoughts?
Using High Sierra, iMac, Razer Synapse 1.82.35 btw with nostromo and naga epic mouse
A
The last update of Synapse v.1.82 was over 1 month ago, 31 Jan 2018
2 months and 10 days...
Razer must have fired all Mac developers...
salut!
2 months and 10 days...
Razer must have fired all Mac developers...
salut!
Userlevel 6
- Staff
- 185 replies
-
7 April 2018
franctastic
The last update of Synapse v.1.82 was over 1 month ago, 31 Jan 2018
2 months and 10 days...
Razer must have fired all Mac developers...
salut!
I can confirm that the developers for Synapse 2 on Mac are still here and well. Now that 10.13.4 release is official/final, it is a part of our full test suite. We are also testing on APFS as suggested by @BaccaBoss2 . The patch with all the latest updates and fixes is tentatively scheduled to be rolled out around end of April.
A
3 months without being able to use Synapse and without any update it seems to you from qualified developers?
3 months!
hahahaha
You can tell them from me to stop trying, and wait for the new macOS to come out in 9 months.
I miss that time with macOS el Capitan, when Synapse was working properly.
salut!
3 months!
hahahaha
You can tell them from me to stop trying, and wait for the new macOS to come out in 9 months.
I miss that time with macOS el Capitan, when Synapse was working properly.
salut!
franctastic
Im my private messages with @RazerThe_Fiend I created a Google Drive Folder with a bunch of crash reports exactly like this for the use of the Devs.
Heres the link: https://drive.google.com/drive/folders/1EL9a7IhHsMHarcQJIcRLFJQtYQ2xFYwQ?usp=sharing
A
hahahaha
I don't send them anything anymore, it's useless!
and I'm sure there aren't that many problems with Windows, but on Mac we're less numerous clients.
We have to wait 1 month for the update to be uploaded, which is sure to be as bad as the last one.
I still think they must change developers; the last time Synapse didn't have any problems was with macOS el Captain...
I don't send them anything anymore, it's useless!
and I'm sure there aren't that many problems with Windows, but on Mac we're less numerous clients.
We have to wait 1 month for the update to be uploaded, which is sure to be as bad as the last one.
I still think they must change developers; the last time Synapse didn't have any problems was with macOS el Captain...
A
I have a completely different question about Synapse 2.0 on Mac. I'm sure you all realized that The Acceleration Bar in Synapse is simply the tracking speed in the system preferences... Im new to razer (2 weeks now since I purchased my DA Elite). Now the thing is: I always played on my mac with the ,,defaults write .GlobalPreferences com.apple.mouse.scaling -1'' command via terminal. I know I know it doesn't disable the acceleration completely, but i think its still the snappiest option for mac (I hate third party applications to disable mouse accel, they all feel very off). My question is do you know how I can keep Synapse 2.0 installed (That means, be able to use my customized Dpi settings) and use the -1 Terminal command at the same time?????? The only option is to use my mouse without synapse but the default DPI's are wether 1800= too slow, 4500= too fast (i'm ignoring the other ones, who the f needs 9k or 16k dpi??!) I'm so frustrated, haven't found a solution for 2 weeks now...... And what settings do you guys use? Are you simply playing with acceleration on synapse? 0 sets the sensitivity to a very very very slow speed.....
Userlevel 7
I have variable DPI set to 200, 800, 1200, 1800, 2900. That usually gives me a good range, depending on what I'm doing. Every once in a while, though, my Mac completely ignores Synapse and just sticks to what it wants, which is usually somewhere in the 1600 range, and then I have to unplug my mouse and plug it back in for the DPI changes to take effect.
I haven't used Terminal to change the acceleration, but in System Pref I usually have it set to just below mid.
I haven't used Terminal to change the acceleration, but in System Pref I usually have it set to just below mid.
A
PT.Singer
I have variable DPI set to 200, 800, 1200, 1800, 2900. That usually gives me a good range, depending on what I'm doing. Every once in a while, though, my Mac completely ignores Synapse and just sticks to what it wants, which is usually somewhere in the 1600 range, and then I have to unplug my mouse and plug it back in for the DPI changes to take effect.
I haven't used Terminal to change the acceleration, but in System Pref I usually have it set to just below mid.
Thank you for your reply, it seems like most mac users with Razer mice use the mouse acceleration. I personally think it's awful but yeah, not everyone is the same. Well, I found a solution. When I delete the razerhid.kext and restart my mac, the default sensitivity will be the last sensitivity stage I used on Synapse, 2800 Dpi in my case, but clicking on the Dpi buttons will change to the default dpi stages: (800,1800,4500,9000,16k). It's not optimal but hey, it works. I love my Razer mouse so far but yeah, Synapse is just awful on a Mac. Fortunately I won't use it for too long on my Macbook Pro. Saving for a tower atm.
A
Hello!! I've just bought a Mamba Firefly Hyperflux (for my MacBook Pro, OS 10.13), but Synapse doesn't recognise no devices!!
Some updates?! Thank you so much!
Some updates?! Thank you so much!
Userlevel 6
- Staff
- 185 replies
-
24 April 2018
interactiveworld956
Hello!! I've just bought a Mamba Firefly Hyperflux (for my MacBook Pro, OS 10.13), but Synapse doesn't recognise no devices!!
Some updates?! Thank you so much!
The Mamba Hyperflux is exclusively supported on Synapse 3, which is only available on Windows.
A
RazerThe_Fiend
The Mamba Hyperflux is exclusively supported on Synapse 3, which is only available on Windows.
I wasted my money?!? :frown_::confused_:
interactiveworld956
I wasted my money?!? :frown_::confused_:
Until the Mac devs catch up, yep.
A
I'm a new Razer user, with a Naga Chroma on my iMac 27" late 2015...my issue is that I'm trying to access the dashboard, but it says it needs System Prefference approval, but I go there and there is nothing to approve...(I've attached an image...) Thnxx for any help you can give me and have a great evening!!! :)
check the screen shot...nothing to approve!! ???
check the screen shot...nothing to approve!! ???
A
My Chroma mouse wont get registered with Synapse, I keep getting the message:
"Please connect a Razer Synapse enabled device"
I'm looking at my mouse, it's clearly plugged in - Though I'm using a USB to USB-C adapter because I have a MacBook 2017 without regular USB ports. But it should work anyway? Everything else I have connected through the USB to USB-C adapter works, so why won't my mouse register with Synapse? I'm moving my cursor around with it. Is this an issue with the Synapse software? Please help me.
"Please connect a Razer Synapse enabled device"
I'm looking at my mouse, it's clearly plugged in - Though I'm using a USB to USB-C adapter because I have a MacBook 2017 without regular USB ports. But it should work anyway? Everything else I have connected through the USB to USB-C adapter works, so why won't my mouse register with Synapse? I'm moving my cursor around with it. Is this an issue with the Synapse software? Please help me.
A
dotsh
Just updated to 10.13.4 and surprisingly it's working on my system. I am able to control the lighting effects via Synapses. Hopefully, it's gonna work on your system too.
So, almost a MONTH since the final version was released and we still have NOTHING. And for those who think the problem is only with macOS: it's not. I do work with Windows too and, despite it OPENS, it bugs constantly, crashes and do crazy stuff too.
Also, my mouse battery promises me lots of hours of working without charge but since I bought it, just last 2-3h. I have sent an e-mail to Razer support and, like everyone else, they just answered blablabla, blablabla, it's not a product problem, blablabla.
The problem wasn't the MacOS developers, the problem is the Razer DEVELOPERS. The whole company doesn't care about giving you proper support in any case. Just wasted my money (A LOT of it by the way: an Ouroboros) and I'll tell you: RAZER NEVER MORE ON MY LIFE.
By the way, this STUPID nickname on my profile was suggested by Razer and, when I create the account, I just WASN'T ABLE TO CHANGE, the fields just doesn't work. Really guys, FIRE EVERY DEVELOPER ON THIS STUPID COMPANY AND START THIS SH** ALL OVER AGAIN.
A
My Ornata Chroma just switched to Static (Green) after... an entire life of never working with Synapse for Mac xD Well, in my case, i exactly wanted to set it like that, so i don't mind if it's a bug or just started working, i'm satisfied.
However, a few seconds ago my Mamba Tournament Edition got frozen, had to unplug-plug to make it work again (bought it the last week), so it would be a shame if it starts failing now :/
Terminal -> sudo spctl --master-disable
With that you will get Apps from Anywhere on that screen, unlock and set. That's Apple protocol since.. Sierra i believe, by default all apps not from the appstore are blocked. Can't believe you just realized that xD
However, a few seconds ago my Mamba Tournament Edition got frozen, had to unplug-plug to make it work again (bought it the last week), so it would be a shame if it starts failing now :/
radiotechVolt679
check the screen shot...nothing to approve!! ???
Terminal -> sudo spctl --master-disable
With that you will get Apps from Anywhere on that screen, unlock and set. That's Apple protocol since.. Sierra i believe, by default all apps not from the appstore are blocked. Can't believe you just realized that xD
A
RazerThe_Fiend
I can confirm that the developers for Synapse 2 on Mac are still here and well. Now that 10.13.4 release is official/final, it is a part of our full test suite. We are also testing on APFS as suggested by @BaccaBoss2 . The patch with all the latest updates and fixes is tentatively scheduled to be rolled out around end of April.
Well...the end of tentative April has come and gone, and Mac users are still out in the cold here. Has any progress been made on this issue? It's becoming hard to believe you have a dedicated team for MacOS without an update or new information for this long. I understand Razer believes Mac users of their products are a niche market (and def treats us as such) - but at the same time how could they expect any other outcome with support being this poor for the platform? Not trying to crack the atom over here, I just want a $@^& keyboard to work properly.
Im on 10.13.3 and Synapse won't launch, and you are talking 10.13.4? Slow down there, Usain.
RZUpdater continually shows up in Activity Monitor as not responding, and has ever since I started using this keyboard, which is well over a year now no matter how many times I install, uninstall, and reinstall your product.
Maybe its time to nuke the current MacOS Synapse codebase (what have to got to lose at this point), and start fresh so it actually launches and works and stuff.
Synapse update is here! Hope this works, I have kept my mouse functioning by delaying system upgrades. Definitely shopping for a non-Razer replacement. I went through this nonsense in 2016 and won't do it again!
A
glynis37
Synapse update is here! Hope this works, I have kept my mouse functioning by delaying system upgrades. Definitely shopping for a non-Razer replacement. I went through this nonsense in 2016 and won't do it again!
As I said in another topic: Razer NEVER more in my life: First and LAST product. So disrespectful.
A
I gave up and gifted my blackwidow chroma 2 to a windows friend. Hopefully he has better luck than I did with it.
Picked up a WASD Code 104 instead, and no drivers required which is great. Its not rgb backlit though, just white which Im fine with.
Picked up a WASD Code 104 instead, and no drivers required which is great. Its not rgb backlit though, just white which Im fine with.
WhiteJADEfront201
As I said in another topic: Razer NEVER more in my life: First and LAST product. So disrespectful.
Fuchsiaheathead295
I gave up and gifted my blackwidow chroma 2 to a windows friend. Hopefully he has better luck than I did with it.
Picked up a WASD Code 104 instead, and no drivers required which is great. Its not rgb backlit though, just white which Im fine with.
Hopefully you guys serve as an example of what poor support of products brings. I like Razer gear, but the dismal, underwhelming support is frustrating and turns away customers. Please take note Min.
A
Fuchsiaheathead295
I gave up and gifted my blackwidow chroma 2 to a windows friend. Hopefully he has better luck than I did with it.
Picked up a WASD Code 104 instead, and no drivers required which is great. Its not rgb backlit though, just white which Im fine with.
Actually, i wanted a normal Ornata, but couldn't find one with spanish keyboard, so had to buy the chroma version; luckily it's stuck with static green color, so it's the same
A
I have had this exact problem "off and on" for a month. Stopped working, then worked for about two weeks, then stopped again today. My Synapse client sometimes is not able to connect to my profile on the Razer servers. Because it is an intermittent problem, I doubt that it is with my MacOS, which I can tell you has not changed. Sounds like a Razer server admin issue to me.
Thanks ... this works !!!
RADIUMU92-SSBPLASMA
I had recently updated my razer synapse program for my mac, and about a day after, the application would open but it wouldn't load my configurations for my razer devices. It would only show the green buffering circle and I left like this for about a hour, and still nothing load4ed. If anyone can give me some help with this issue, it would be much appreciated. Thank you.
franctastic
opens Activity Monitor, force quit RzDeviceEngine and reopens Synapse, until your profile is loaded (not always working the first time)
there are more alternatives, but this way is simple
salut!
Thanks ... this works !!!
Page 3 / 6
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.