[MONTHLY SILVER] November 2026 30,000 Silver Drawing
-
Recently active
Everything seems to be working ok except that the key containing the appostrophe and quotation mark is unresponsive. This keyboard was just purchased to replace the Blackwidow Keyboard because it was spamming/duplicating some character (notably the W key, but occasisional others).I am now assuming that Razor keyboards are not quite up to par quality wise?????
I just received my huntsman mini today to replace my ducky one 2 mini and once I got into game I immediately noticed input delay. I looked on many different forums and posts to try to figure out what the problem is and many others were having the same problem. I went on the keyboard scan rate tool app and tested the huntsman mini and my ducky. The ducky was coming back with 2ms response times and 500hz polling rate. The huntsman mini is supposed to be 1 ms response time and 1000hz polling rate but is only showing 22ms response times and 50hz polling rate. Please help, thank you.
Can you switch the keycaps out on the v3 pro mini? I know the customization is limited; just curious as to how limited. Switchin out the keycaps still an option?
Hi, Have tried everything i could find on this issue including the help from the other post on this forum but to no avail. Story goes like this, got the keyboard from my GF (it was working fine), wanted to update it to the newest firmware (which shows 1.03.03 for RZ03-01700100-R3M1 model). Halfway through firmware update, keyboard gets update fail and continues to be stuck in what i presume to be bootleg mode as windows recognises the keyboard only as Razor Bootloader. Tried the following,FN key reset Esc/Caps/Space reset uninstalling all razor apps and restarting computer using firmware update v1.08 trying to get synapse 2.0 to recognise keyboard but cannot be detected by synapse plugging into different ports plugging into different computerAll above has not helped. T_T please advise
Blackwidow ultimate keyboard manufacturing has stopped, is there a replacement for it?
Razer hunstman min stop working the hypershift function, I have windows 10, if i reasign the hypershift function to another key also doesn’t work, what can I do? Also dont know how to get the keyboard’s logs.Please help, I have no hypershift functionality. Try to get log without success. thanks
I was playing some games when suddenly my keyboard became like this, and I don't know what to do if there is any way to help, please do
I would like to express my disappointment regarding the quality of the Razer brand keyboard I recently purchased. While attempting to perform a switch change, I accidentally had the tool I was using brush against the surface of the keyboard, leaving obvious marks. Considering Razer's reputation for producing high quality products, I expected the keyboard to be built with more durable materials. However, I was surprised to discover how easily it scratched with minimal contact. This experience was deeply disappointing and makes me question the durability and overall quality of Razer's products.The truth does not look like much but half roso and the scratch is already noticeable, this time I value them a point to logitech in terms of materials.
Hi Guys,Today I updated my blackwidow v3 pro’s framework to 3.0.x ver, and after that I found the keyboard wireless cannot work when plugin the USB cable for charging only (Both 2.4g and bluetooth). It can work fine if pluged with a PC ( the wireless cannot work though). Unplug the cable the wireless works fine. When plug in the usb cable (in a wall power sockect), the keybord will shutdown for a second, all lights die, then relight up slowly. At this moment only lights are up, but wireless functions are died. Before updating the framework everything was fine (version was 2.0.x). And i also tried to reset the keybord from Synapse and Hold “ESC + Caps On + Space” method, nothing worked. Changed to other wall sockets, changed cable, nothing worked. Need your kind help if anyone has solution or idea on this, million thanks!
It would be good if the Huntsman V3 also considered the possibility of allowing the keyboard function with secondary function to be reversed. For example, if I want to sneak I press lightly and for normal running I press completely. Unfortunately, it's difficult to describe it properly the way I mean it. But try a game where you can sneak. Otherwise it works with analog WASD, but some games don't support controllers. Does anyone have any ideas on how I could set it up with the assignment?
does the razer blackwidow v4 x have removable keycaps?
Cynosa v2’s button’s colour are peeling off. Especially the buttons I used often.
My number 20 keycap came off of the V2 (not the pro model), I cannot find a replacement for it anywhere and Razer will not let me contact them because it is out of warranty. Does anyone have any leads on how to obtain a replacement number 20 key for this? Thank you.
So my dad bought a razer huntsman mini for me and its not old only like 5 months and i dont know what i did to it but it doesnt work anymore i even unpluged it and pluged it again and still nothing i even tried to connect it to another device but i still didnt work so i still have the box wires and everything please help me how can i return the keyboard to be replaced.
I have a huntsman elite with the common wrist pad damage. Does anyone know of another razer wrist rest which has the exact same size pad?The plan is to remove the pads and swap the new one onto the huntsman rgb wrist rest. Thanks.
I’m simply trying to remap ctrl+V to ctrl+shift+v on my blackwidow v3 mini hyperspeed. When I go to the keyboard function section I’m only able to select one key at a time.
I really want to change the switches on my blackwidow v3 because I didnt realize how loud they would be and hollow sounding. I love the physical board for all of the rgb and macro stuff but wanna install some aqua king v3 switches in there. also, are 3rd party stabs able to be installed? I hate how rattly mine are. Thanks!
Hi, can anyone help me? I can't get the keyboard RAZER BLACKWIDOW V3 to work with a USB switch. When I switch from one PC to another, the keyboard stops working and I must have to restart the system. The same thing happens if I disconnect the keyboard and reconnect it to the same PC. I have to reboot all the time. There is a solution?
hi razer support , i have Razer Huntsman Tournament Edition keybord and today i trun on my pc , and my keybord nor working and not lighting but when i Plug the keyboard into a USB port i heared the windows sound, so can u help me to work my keyboed
I have a Razer Huntsman Mini keyboard, and sometimes, once every 15-20 key presses, regardless of the key - it doesn't register. When I notice that the key isn't registering and at that moment I'm not releasing it, but instead press another key like the spacebar, then the previously unregistered key starts working. Why could this be happening. I've already restored the software to default settings, but it doesn't help.
I just bought this model from someone on facebook marketplace and it looked to be in really good condition and working order, but after downloading razer synapse there’s a tile that says I need synapse 2.0 for a “legacy device” that it recognizes, which I’m guessing is the Tartarus. I haven’t been able to find a download for synapse 2.0, but I do have the Razer synapse beta. Is anyone else having this issue?
Hey, I would be interested to know if it would be possible to change the switches on the keyboard to, for example, “Clicky” switches. And if so, which ones would be compatible?
I'm looking for the Best compatible keycaps for the Razer Huntsman V2 Analog, a set that is kind of transparent and shows more RGB. However, I've heard some packs like HyperX pudding have problems with low bar keys, etc. Can anyone suggest a set that completely fits my keyboard? I've heard Gskillz Crystal Crown Keycaps is suitable. Can anyone confirm it?
Does anyone know, are there any plans for a Swiss CH Layout to come out for the huntsman v3 pro tkl. Ive been looking to buy the keyboard but cant since theres no CH layout .
How do I keep the keyboard lit up ? It goes dark way too fast and I’ve tried the new beta Synapse app. It’s useless crap.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.