Mice and Surfaces | Razer Insider
Skip to main content

Mice and Surfaces

-

  • 2,055 Threads
  • 6,169 Replies
2055 Threads
G
gaduramo
posted in Mice and Surfaces
Actuation force of deathadder elite

What is the actuation force of the razer deathadder elite? I'm looking for a mouse with a light click

0
G
3 years ago
D
Dinoraul
posted in Mice and Surfaces
Razer Deathadder Elite RZ01-0201 partial left click registers.. need fix

this is pretty old mouse. i checked for driver updates in control panel. right click is working but left click it works only in few areas or if i click with more pressure. hardware issue, i tried in laptop and it still showed the same. Haven't cleaned at all and i tried dissasembling to clean but the area between the left click and base i didnt know how to remove (i was able to remove screws and see the scroll wheel and stuff). Couldnt find any software in the razer website first thread btw

0
D
3 years ago
robinsad
robinsad
posted in Mice and Surfaces
Naga Pro PS5 compatibility

I have a Naga Pro and was hoping to use it with final fantasy XIV as it has on board memory. The mouse itself seems to work but I’m having no luck with the side buttons I assume I know the answer but wanted to check if I’m doing something wrong. I know other devices with onboard memory work so was hopeful with this one.

0
robinsad
3 years ago
T
thetyc
posted in Mice and Surfaces
Razer Naga Epic Chroma & Firefly v2 tracking issues

Hi there, I have had the Razer Naga Epic Chroma for a few years and I've just bought the Firefly v2 mat to pair with it going from the soft mat surface to the hard mat surface. Unfortunately there seems to be tracking issues and the movement isn't smooth and actually works far better just on my desk surface. The synapse 2.0 software does not have the calibration tab for the mouse and I have tried holding the left, right and wheel buttons together for 7 seconds in an attempt to recalibrate it but this has been unsuccessful. Does anyone know if there is there anything else I can do here to sort out the tracking issue? Or if the devices are not compatible the only other scenario is to return the mat in exchange for another soft one again. Thanks in advance for any help answering this issue.

0
T
3 years ago
R
Raykadika
posted in Mice and Surfaces
Razer Basilisk Ultimate Firmware for Nvidia Reflex Support

Hello, i see Razer Basilisk Ultimate now support Nvidia Reflex, but why until now new version firmware still not yet release ? i check all firmware Razer Mouse which support Nvidia Reflex has been updated, the firmware come with new release and support Nvidia Reflex Analyzer. But why until now Razer Basilisk Ultimate didn't receive new version with code number 1.07.01 ?

0
R
3 years ago
S
sideScarletbit187
posted in Mice and Surfaces
Botón embrague basilisk

Hola. He perdido el botón de embrague del razer basilisk y no sé como ni donde comprarlo. Soy de España. Gracias.

0
S
3 years ago
A
AfonsoRodrigo
posted in Mice and Surfaces
[Naga PRO 2022] Dear Razer please...

This mouse is a tool I honestly get lost without I have so many profiles both for gaming and productivity. I've run through 4 Nagas: the OG (with blue light), two Epics (that I bought for the price of one! In one of those crazy CES promo) and one Chroma. I confess I've flirted with a Logitech I don't even know the model, that monstrosity with the third button, it lasted less than one day for me, I love the shape of the naga mouse. I want another one, BUT I'll only buy if/when it has the following features: USB-C connector without a recessed plug; I want all the features the current PRO has, but I don't want the HEX, nor the dual button side, it's just E-Waste for me; Instead just make it with the 19 buttons and save us some weight (and cost) it will sell like hot cake!

0
A
2 years ago
C
Colleptic
posted in Mice and Surfaces
Naga, Trinity and Pro Suggestions Thread!

Hey, I have been using the Naga line now for years, and I have a few suggestions and improvements for Razer. So I started years ago with the Naga with the fixed 6 button panel. I then moved to the Naga Trinity Wired, then the Trinity Pro Wireless (current mouse). Out of all these mice, I have only had one problem, the circular 7 button panel's #4 button stopped working in about 8 months, since there was no way to replace it, I bought another mouse just for the panel...which was cringe !! I now use the circular panel from the wired trinity on the Pro wireless, as I do not like the inline 6 button panel that comes with the Pro...so this is where I have most of my advice for Razer. The original Naga was actually my favourite. This is because the buttons where bigger, still not optimally placed, but they were big, very responsive and they lasted for YEARS. The Trinity's circular 7 button panel, was ok, but the buttons are too small, VERY unresponsive for FPS quick gaming, and it is v

0
C
3 years ago
D
Danj32
posted in Mice and Surfaces
Razer Naga Pro - Macbook incompatibility

Hi, I have had to send my Razer blade 15 away for repairs due to faulty GPU. In the meantime I am reverting to a macbook pro for gaming. Synapse 3 is unavailable on macbook, but despite this the Naga Pro still somewhat works. I am however having some difficulty with the Naga Pro when using the keys in conjunction with other keys whilst gaming. I am using the 1-12 side panel on the Naga Pro, hence my keybinds on my blade are 1-12, shift 1-12 and ctrl 1-12. For whatever reason when trying to press the 1-12 in conjunction with shift / ctrl, it simply just gives the 1-12 command. An example of the above is, the number 12 key is keybound to = on my keyboard, so pressing shift and = should give a + sign, but instead is just gives = like it does not recognise the shift. Any pointers on this issue? Note, game I am currently playing is World of Warcraft. Thanks in advance, Danny.

0
D
3 years ago
Z
zaqii
posted in Mice and Surfaces
Razer Viper Ambidextrous Gaming Mouse

This mouse is an absolute bang for buck. Coming under 80 bucks it provides an ambidextrous chassis, side grips and 5G sensor with a max dpi of 16000. This mouse is only 69 grams (nice) with no holes on its top and also has rgb. The Razer Speedflex cable is one of the best cables out there providing absolute flexibility. The mouse has 4 side button and an stealthy gamer look. I highly recommend this as a budget mouse.

0
Z
3 years ago
G
GOLDENPAPA97
posted in Mice and Surfaces
How durable/longevity of your Razer Mice?

Hi all, just want to share my experience with Razer product, I had purchased Razer DeathAdder Black Edition in October 2014, use until now the condition is still good! Now my mouse age are already about 7 years old ! <3 during many years of usage, the mouse scroll is actually problematic, but it just auto fixed afterward!! before purchase this mouse, I always get random mouse in shop around SGD10, and it only lasts like 2-3months till the problem arise. it proven the price ratio of razer product, it is worth of money and quality guaranteed. Thanks again to Razer to making a lot of great product !! :D The nostalgia razer mice 2014 packaging!! Photo in new condition, October 2014. This is the photo in June2021.

0
G
3 years ago
M
Mullewumbu
posted in Mice and Surfaces
Razer Blade Laptop (15' 2018 Base Model) makes loud Grinding noises

Hi, I got this Razer Blade 15' Base model since about 2,5 years now, all of the Sudden it makes loud grinding noises from time to time (not consistently). I'm worried that this might be the Hard Drive (which I have un-backupped data on). How would you proceed to check what parts might be damaged if you wanna do it yourself (im out of warranty)? Or is this issue known already?

0
M
3 years ago
A
Alpac4
posted in Mice and Surfaces
Viper Ultimate grip tape diamond shape problem

I'm wondering if razer could fix the diamond shape on the viper ultimate grip tape because it is more grippy when the diamond shape is horizontal like it shows on the box, while the one that come in the box is vertical, making it okay but not as grippy as if the diamond shape was horizontal. I've tested this with the razer universal grip tape and it does make a difference. btw the image is not mine but is a reference

0
A
3 years ago
T
That1nekid
posted in Mice and Surfaces
Razer Viper Mini unresponsive

Hi, whenever my Mac goes to sleep for a bit my viper mini led go off then when I left/right click on my mouse the led turns back on and wakes up the Mac, but the mouse is unresponsive and doesn't move the cursor and none of the buttons work. The only way I've found so far to fix it is by unplugging and plugging the usb back.

0
T
3 years ago
T
Tashdeed
posted in Mice and Surfaces
Viper mini - 2nd purchase

Bought another Viper mini, my second one *to date. TL;DR The first one had scroll problems. Common. The second one was purchased after a 4-month wait. Hoping to NOT have another bad experience. 'TL; I care to read' version Been using a Havit MS-300 as a backup. 0 scroll wheen issues till date over 2 years of use and 12 times more scrolls than the RVM as per mousotron data. And it costs less than half of the RVM and still contains a better encoder :| Coming to my RVM history: The first one had a scroll wheel and click issue. Both. That unit was made by a manufacturer of Razer with the 'FRML Packaging'. Details on it are found on the web. If yer too lazy, let me know, I'll Ctrl+C; Ctrl+V for you :P So, I returned that unit and after waiting 3 months minus 3 days for a replacement, the retailer (local) refunded me the full amount. Then I bought this new unit (the second one) from another local retailer, HOPING that the newer batches will address these issues..... HOPING.... on sth

0
T
3 years ago
P
polyGrizzlyQUARTZ289
posted in Mice and Surfaces
Razer Viper Mini with WDF_VIOLATION problem

Hello guys, I also recently got a problem with my Viper Mini mouse. Whenever I plug in to my MSI GP75 Leopard gaming laptop, it also go to the blue screen (stop code: WDF_VIOLATION). However, i also tested with other gaming mice (logitech, marvo) and they worked pretty fine. Can someone help me fix this problem, please?

0
P
3 years ago
C
Chandisxix
posted in Mice and Surfaces
Basilisk Ultimate Box Contents (Specifically China version if that matters)

Hey guys first time poster here, sorry if it's a dumb question. Recently I've purchased the Basilisk Ultimate from an online shop originating from China. I've received the package and noticed that it doesn't include the traditional Razer "Thank you note", the manual, logo stickers, and the micro USB cover (USB A has tho). I've seen online that the box should have those included. I asked the seller about this and they claim that the China version of the Basilisk Ultimate don't include those?? I wanna know if you guys can confirm their claim or it's utterly complete bs. Also just to add, registering the serial number works in Razer's website and is detectable in Synapse, but I noticed part of the mouse's bottom sticker is cut off and the feet already have scratches on them which leads me to believe they sold me a second-hand unit. They even went on to said that they intentionally cut the sticker cause "It proves that it's from us and part of our warranty" lmao. I'll include picture

0
C
2 years ago
S
solodataKeppel109
posted in Mice and Surfaces
orientation of the mat in relation to the mouse

by default on chroma studio software, the mat is straight (compared to the mouse) in my case, I am tilted 90 ° in chroma studio, it is possible to orient the mat 90 ° in relation to the mouse if not, can be a function to add thank you https://nsa40.casimages.com/img/2021/06/17/2106170644375571.png https://nsa40.casimages.com/img/2021/06/17/210617064438114876.png

0
S
3 years ago
L
Lemonheatleet149
posted in Mice and Surfaces
Deathadder Elite - problem or no?

Hello my question concerns the Razer Deathadder elite which I have the pleasure of using today, the mouse itself is wonderful but I am worried about 2 things and whether it is a product feature or my product is defective, my first concern is that when clicking the right button is softer and quieter than the right one and my second fear is that when I tap the right button very gently, a knocking sound is heard (it is not loud) maybe someone has had this mouse and knows if it is normal because I panic a lot. Maybe someone has Deathadder Elite and would share their impressions.

0
L
3 years ago
T
thinkPaleBlueplace334
posted in Mice and Surfaces
Suggestion - Vertical DeathAdder

Have you considered developing a vertical mouse? I recently switched over to using a vertical mouse for work because of hand and wrist strain but I miss the feel and precision of the DeathAdder especially the middle mouse button. Which got me thinking what if we had a vertical DeathAdder?! As a game dev and artist I would be in absolute love with a vertical DeathAdder. Take my money!

0
T
3 years ago
W
WhyIsWindexBlue
posted in Mice and Surfaces
Faulty Mamba Wireless Connections

Hello, I have been having using my Mamba Wireless mouse for about 5 months and it has worked great, but lately it is having some issues. When I try connecting wirelessly via the dongle, my laptop, a Razer Blade 15, registers that the Mamba is connected in the blue tooth settings, but the mouse itself is not registering. When I use the provided wire for a wired connection, it again does not register that the mouse is connected, but the mouse appears to have power and is charging. I have connected other things via the cord and they also charge. Not sure if there is a way to reset the mouse itself if that's the issue. I have downloaded the latest firmware, which updates for the dongle, but when it comes to the second step of updating via the wire, it will not work because it does not register that the mouse is connected. I have also tried repairing Synapse 3, which had no effect, and I also tried the Mamba Wireless Pairing Utility Guide, but the links for the download will not open, even

0
W
3 years ago
A
autoBudGreenflow315Insider Mini
posted in Mice and Surfaces
Naga Pro seems dead all of a sudden

I was playing some games with my mouse in Bluetooth mode. The mouse was working fine, but all of the sudden it decided to shut down. The mouse never powered on again. I tried connecting it via USB but the mouse is not recognized by my PC and its lights remain off. I've tried connecting the USB cable into another device and it works fine. The problem seems to be the mouse. I've had this mouse for less than a year. I tried installing the newest version of Synapse, as well as updating the mouse drivers but I failed because the mouse needs to be detected by the computer to updates its drivers. I've restarted my PC, tried to update the USB ports and Mice drivers in my Device Manager. I've also tried restarting the mouse by pressing the left and right clicks plus the scroll wheel for 5 seconds or more and there is no response coming from the device. I've tried disabling my antivirus to see if it was the problem but it isn't. The mouse seems to be dead, and I've been very careful taking care

0
A
3 years ago
W
Whoza_Whatzit
posted in Mice and Surfaces
Basilisk Grip Pads Peeling Off

I'm having issues with the thumb grip on my Basilisk coming off. I've had my mouse about a year at this point, and if I spend longer than a few hours the grip starts pushing in and up, and unless I fix it, my thumb is inevitably on the "stick" (which for some reason isn't all that sticky anymore... probably the reason it's moving.) I submitted a case to support and was denied for "user error" which... I'm not sure how I possibly could have caused this to happen when all I do is use my PC for gaming and a half-days worth of office work. Is anyone else noticing issues with the grips peeling off?

0
W
3 years ago
C
ChaosSpoofer
posted in Mice and Surfaces
DeathAdder V2 DPI Increments

I just switched from the DeathAdder Elite to the V2, and I'm a little disappointed that I can only adjust the DPI in increments of 50, rather than having the freedom for exact custom values like with the Elite. Is there any sort of workaround in a config file somewhere that I could adjust (or any other way to achieve this), or would that fritz out the software?

0
C
3 years ago
B
barrenwizard
posted in Mice and Surfaces
Basilisk Ultimate Brightness Level Doesn't Memorize

Who else has issues of their Basilisk Ultimate brightness in Razer Synapse having issues? I always turn to 5% brightness but somehow Synapse always change it to 33% without my knowledge. I will only realize something is wrong when the battery strength gets low too fast. I can never replicated this issue. I did send a diagnostic file to support but GG with them, no replies after that.

0
B
3 years ago

Badges

View More
CookiesCookie settings