v2s picking up too mutch sound

Hi aeroOrchidfun243,

I undertand that your Razer headset is too sensitive, picking up distant noises and slight movements. To fix the issue, please so the troubelshooting steps laid out below:

1. Clean dirt or debris that may obstruct the vents or diaphragm of your mic.
2. Ensure the audio ports and jacks are clean and the headset mic is properly attached.
3. Make sure the mic diaphragm is in front and the air vent is facing away from your mouth.
   
    
4. Get the latest Windows update.
5. Make sure your apps can access the mic.
    
6. Ensure your headset is set as the default recording device.
    
7. Set Windows microphone level and microphone boost to values that works well for your setup.Note: Higher levels can cause mic to be more sensitive. 
    
8. Update the firmware on your headset if it is on the list.
9. Rule out software issues. Close all audio enhancing software including Razer 7.1 Surround Sound and check if the issue persists.
10. Try reinstall your headset drivers, including Razer 7.1 Surround Sound. Restart your PC then test your headset.
11. Check if the issue persists with a different PC.

 If the problem persists, please PM me your device's serial number, and I'll look for other solutions. Thanks!

​​​​​​​*Thread locked to curb the conversation to PMs.