Just purchased this new Razer Blade 17. Connecting to an external monitor with a USB-C-to-display-port cable, and a straight display port cable. From either of the Thunderbolt 4 (USB-C) ports. No signal detected from monitor. Whenever I plug in a monitor, NVIDIA control panel shows Optimus as the active graphics adapter. And the NVIDIA GPU becomes disabled and I'm unable to select. See screenshot.
I just used the Razer BIOS updater and updated the EC as well.
Model: (*Omitted)
Any help is greatly appreciated!
Page 4 / 7
Just to confirm, I own a Razer Blade 15 2022, RTX 3070 Ti and have the same problem.
I can also revert back to Geforce 512.95 and then my Razer Raptor monitor is recognized again by the USB-C port on the right side. But I still can't use the most recent drivers.
This is a serious issue, especially for what's supposed to be a cutting-edge gaming laptop. It's incredibly frustrating that this has been going on for months and Razer still hasn't found a solution with Nvidia.
I can also revert back to Geforce 512.95 and then my Razer Raptor monitor is recognized again by the USB-C port on the right side. But I still can't use the most recent drivers.
This is a serious issue, especially for what's supposed to be a cutting-edge gaming laptop. It's incredibly frustrating that this has been going on for months and Razer still hasn't found a solution with Nvidia.
aalhail
I own a Razer Blade 17 2022 , NVidia RTX 3070ti
And manage to fix the problem with downgrade Nvidia to 512.95
All good now
This is not a fix but temporary solution or workaround/ Fixed will be when you can update driver to up to date driver and everything will be working as should be. For now this is not possible.
I own a Razer Blade 17 2022 , NVidia RTX 3070ti
And manage to fix the problem with downgrade Nvidia to 512.95
All good now
And manage to fix the problem with downgrade Nvidia to 512.95
All good now
Bubblessmarttech156
Yeah - feels like they're making it a "you problem" - rather than an issue with their bios. Not great ITAR either since they've largely ignored this thread. Suggest tweeting them might make its way via a different channel to someone who can actually diagnose / triage the problem - or make that happen!
You can find in this thred messages from Razer support employe but he can only adress the issue is prezent and it for the team that will investigate the problem. The Real problem is team that should eliminate the problem lin Max week or two. Lack of knowlage is why there is no fix for this dat.
Yeah - feels like they're making it a "you problem" - rather than an issue with their bios. Not great ITAR either since they've largely ignored this thread. Suggest tweeting them might make its way via a different channel to someone who can actually diagnose / triage the problem - or make that happen!
Bubblessmarttech156
So are you saying it's a Razer update fix required here?
Keen to not fork off onto some weird BIOS branch only to be saddled with a choice to loose the setup (as advertised mind you and therefore grounds for compensation / redress at the expense of the supplier).
This is probably why they're being cagey. Since they have offered a device that can't provide the advertised feature. The Sqeaky wheel gets the oil - amazed how many people are having the same issue and no addressed solution.
The Support email I got doesn't help either.
I can be wrong but from what see here and on the web the issue is for regular 30xx and ti cards. Every brand that shipp device with one of this cards have the same problem. Some brands like write above fix the issue with bios update also here someone write that have bios for he”s device and this fix the issue. Base on everyting we stuck with premium laptop that is very expensive with enginering team from Razer that cant do their job find and fix the problem. MSI fix the same problem with one week we waiting almost two month.
So are you saying it's a Razer update fix required here?
Keen to not fork off onto some weird BIOS branch only to be saddled with a choice to loose the setup (as advertised mind you and therefore grounds for compensation / redress at the expense of the supplier).
This is probably why they're being cagey. Since they have offered a device that can't provide the advertised feature. The Sqeaky wheel gets the oil - amazed how many people are having the same issue and no addressed solution.
The Support email I got doesn't help either.
Keen to not fork off onto some weird BIOS branch only to be saddled with a choice to loose the setup (as advertised mind you and therefore grounds for compensation / redress at the expense of the supplier).
This is probably why they're being cagey. Since they have offered a device that can't provide the advertised feature. The Sqeaky wheel gets the oil - amazed how many people are having the same issue and no addressed solution.
The Support email I got doesn't help either.
Ender1618
working on a NVidia driver 516.25 or higher?
I heard something about making sure your USB-C ->Displayport cables are rated for Thunderbolt 4.
Nope read my previous post here. On second question this dont give anyting. Without bios update that fix the issue you do anyting. You stuck on old driver where external monitor works or new where it dosent. The posts that you write was where old or other brands have bios update.
FlyingFoxFei
I finally figured out... The driver was fine. no issue. The only issue is that my new razer require thunderbolt 4 cable to connect to external monitor. i swapped the thunderbolt 3 to 4 and all problems solved. Thanks!!
Which cable did you use? What model Razer did this work for?
I own a Razer Blade 17 2022 (RZ09-0423x), Intel i9-12900H, NVidia RTX 3080ti. I read on this thread that on some older versions of the laptop that a bios update helped fix this issue. I am on version 1.07 of the BIOS, and there does not seem to be an update past that (not that I could find).
Is there an driver update past 1.07 for RZ09-0423x that exists?
I use this laptop mainly for game development, and I can confirm that the Unreal 5.03 Editor crashes using the Nvidia driver 512.15, but the application runs fine with 516.25 or higher (but then my USB-C display ports stop working). The editor gives a warning on start-up if your driver is not 516.25 or above. BTW trying to drop down to version 5.02 of Unreal is not an option (you would have to build it from source, and its just not supported).
I have also been looking at the forums of other retailer's that sell laptops with similar specs (12th gen intel, and NVidia 30xx RTX), some had a similar issue with their USB-C -> Display ports not working after the 512.15, but some were able to fix this with a laptop BIOS/firmware update.
I am hoping that Razer will continue to work with NVidia on trying to solve this problem, ether in the form of NVidia releasing a new driver or Razer or maybe both, that fix this.
Has anyone been able to get the display ports working on a NVidia driver 516.25 or higher?
I heard something about making sure your USB-C ->Displayport cables are rated for Thunderbolt 4.
Is there an driver update past 1.07 for RZ09-0423x that exists?
I use this laptop mainly for game development, and I can confirm that the Unreal 5.03 Editor crashes using the Nvidia driver 512.15, but the application runs fine with 516.25 or higher (but then my USB-C display ports stop working). The editor gives a warning on start-up if your driver is not 516.25 or above. BTW trying to drop down to version 5.02 of Unreal is not an option (you would have to build it from source, and its just not supported).
I have also been looking at the forums of other retailer's that sell laptops with similar specs (12th gen intel, and NVidia 30xx RTX), some had a similar issue with their USB-C -> Display ports not working after the 512.15, but some were able to fix this with a laptop BIOS/firmware update.
I am hoping that Razer will continue to work with NVidia on trying to solve this problem, ether in the form of NVidia releasing a new driver or Razer or maybe both, that fix this.
Has anyone been able to get the display ports working on a NVidia driver 516.25 or higher?
I heard something about making sure your USB-C ->Displayport cables are rated for Thunderbolt 4.
placeMayGreenfresh369
THIS IS A DRIVER ISSUE! Roll back your graphics driver and the connectivity will be there. This is an NVIDIA issue. No idea why Razer haven't made this clear.
I dont agree with you the same issues was on every other laptops from the review of msi ge56 or 76 if dont mistake reviewer rise up this problem on Video and tell he send message to msi about this and after a week they give bios update. So yeah we stuck waiting on Razer enginering to solve this. I can only Think base on the info from other brands and they actions this can be conflict or communication issue from gpu to motherboard.
Mack_
Which Blade 15 adv 2021 do you have? Mine is RZ09-0367 and I can't find any BIOS upgrade for it.
Hello, my computer is the same model as yours, the same, I can't find any bios update,I don't want Razer to just drop this model,They don't even open XMP and undervoltage to us.
Razer.Speedcr0ss
Update:
We have found that by updating to the latest NVIDIA driver (later than 512.33), the USB-C port will not work when connecting to an external monitor. Please check the following:
• The Blade 17 2022 | RZ09-0423x (both USB-C ports will not work).
• The Blade 15 2022 | RZ09-0421x (the USB C on the right side will not work).
• For QHD 240Hz SKU, which supports Advance Optimus (the "Manage Display Mode" option in the NVIDIA control panel will not be present).
Razer is aware of this behavior, and the Support Team is tackling this issue and currently communicating with our developers. Our workaround is to perform a display driver rollback to 512.33, the same version in the Windows update. If the rollback button is grey out, uninstall the current driver and perform a Windows update check.
Has this been solved?
Has this been solved?
THIS IS A DRIVER ISSUE! Roll back your graphics driver and the connectivity will be there. This is an NVIDIA issue. No idea why Razer haven't made this clear.
I’m happy that help you. For the tb4 is hard to tell becose i’m using direct connection and on my tb4 all ports are in use. How are the ivestigation is going ? Becose people/cudtmers are waiting.
Hi ! Similar problem on Razer Bade 15 Advanced 2021 (RZ09-0409)
I use two monitors connected via USB-C on the razer dock thunderbolt 4. I also updated my bios to v2.02.
With nvidia driver <516.xx everything is working fine.
With nvidia driver >516.xx my monitors are listed in the nvidia control panel but cannot be used. I tried to connect the tb4 dock on both USB-C ports, same problem. When I connect the monitors without the dock, directly on the USB-C ports it's working properly.
I hope this will help devs finding the problem.
I must say that I am also disappointed that this could happen with hardware that is that expensive.
Have a great day
I use two monitors connected via USB-C on the razer dock thunderbolt 4. I also updated my bios to v2.02.
With nvidia driver <516.xx everything is working fine.
With nvidia driver >516.xx my monitors are listed in the nvidia control panel but cannot be used. I tried to connect the tb4 dock on both USB-C ports, same problem. When I connect the monitors without the dock, directly on the USB-C ports it's working properly.
I hope this will help devs finding the problem.
I must say that I am also disappointed that this could happen with hardware that is that expensive.
Have a great day
FlyingFoxFei
I finally figured out... The driver was fine. no issue. The only issue is that my new razer require thunderbolt 4 cable to connect to external monitor. i swapped the thunderbolt 3 to 4 and all problems solved. Thanks!!
Is this maybe the solution for everyone with this issue?
FlyingFoxFei
I finally figured out... The driver was fine. no issue. The only issue is that my new razer require thunderbolt 4 cable to connect to external monitor. i swapped the thunderbolt 3 to 4 and all problems solved. Thanks!!
Thanks for confirming. Should you need additional assistance, you can submit a ticket to our Support Team as the laptop's port performance needs an investigation. Otherwise, send me a PM so I can help initiate a support ticket on your behalf.
I finally figured out... The driver was fine. no issue. The only issue is that my new razer require thunderbolt 4 cable to connect to external monitor. i swapped the thunderbolt 3 to 4 and all problems solved. Thanks!!
this is so weird. i did what you suggested. now it's working if i connect my laptop to a monitor directly via thunderbolt. however, still not working if i go through the razer docking station..
FlyingFoxFei
Thank you! will try. two questions - 1) what do you mean by don't mistake driver uninstaller? and 2) what is the app to remove registry entries?
If you want to remove registry files, try using the Revo Uninstaller. Please refrain from to not deleting any Microsoft registries as it can harm your PC's operating system. If you only want to delete the GPU driver, you can search for Display Driver Uninstaller (DDU).
FlyingFoxFei
Thank you! will try. two questions - 1) what do you mean by don't mistake driver uninstaller? and 2) what is the app to remove registry entries?
IPhone dictionery is quite agressive this is why some words are incorrect. Back to questions dont enable internet connection becose before you will install new driver Windows update will install it before you for me it want to install 516.2x on this version monitor for sure will not work. On second question try driver sweeper it is simple and free.
Thank you! will try. two questions - 1) what do you mean by don't mistake driver uninstaller? and 2) what is the app to remove registry entries?
Reply
Sign up
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.
LOG INEnter your E-mail address. We'll send you an e-mail with instructions to reset your password.