- 198 Threads
- 749 Replies
Hi I just received my new razer kiyo pro and it seems to be working on zoom and obs but I can't seem to find the setting for it on razer synapse. I can't adjust it to HDR mode if the settings don't appear in synapse. Is there any fix for this? Thanks in advance
Advanced imaging. Absolute fidelity. https://www.razer.com/streaming-cameras/razer-kiyo-pro/ Achieve the highest standards of streaming and video calls with the new Razer Kiyo Pro - a Full HD USB webcam with a cutting-edge adaptive light sensor that adjusts to any lighting condition while streaming at 1080p 60FPS or 30FPS when HDR is enabled. No more excuses for having your camera off. Available online at Razer.com: https://www.razer.com/streaming-cameras/razer-kiyo-pro/ Want to see if for yourself? Visit one of our RazerStores! https://www.razer.com/razerstores.
After watching a bunch of reviews for this camera that said it would be great for productivity, and increase the quality for all of us "work from home" folks, I pulled the trigger and bought this camera. Installed fine, Configured it to look great inside Synapse. HDR works well for the lighting in my work space, Medium FOV is perfect for my office as well. Go into Zoom to take a look...BLAH! All Widescreen FOV, no HDR, just looked like garbage. Video flashes every 2-3 seconds ands would probably cause seizures in an actual meeting. Tried Teams...same thing. Even connecting the camera to NVidia broadcast it looks horrible.
This happened in the past, but it's more recent now, so whenever I move my mic the wire would somehow disconnect or not disconnect, my friend will say why is your voice so high pitch and laggy, I then check discord hear audio and it is bad, I just found out that if I unplug the wire and plug it back in, it would work but it is very tedious and I would want to know what I should do to stop make this thing happen
I just recently upgraded to the new Asus G14 from an Acer Swift 3. After messing around with a lot of settings I got it to work on the old laptop. but as soon as I switched to my new one I get no sound and no video. and occasionally it wont even show the capture card in streamlabs. For something that is suppose to be plug in play it definitely is more than a hassle. I've looked everywhere online to fix the problem as this is messing with my income as a content creator. If i cant find a fix soon or Razer fixes the problem I'll probably just end up buying a different capture card with less issues. also i am trying to capture from a xbox series x and my xbox one. neither one would show in streamlabs. so i believe its either a ripsaw issue as its not the first time I'm dealing with this. or its a streamlabs issue but i doubt that since other clients like obs have the same issue.
I’ve seen a few threads that say that the fix for a blurry $150 webcam is to A) unplug it and re-plug it each time, or B) change the drivers. neither is a solution I think we should accept. I use mine in a docking station with four different laptops, one of which is a work laptop whose drivers I can’t change. This is marketed as a top end webcam, and I have to fiddle with it more than any other cam in my inventory. razer, fix your crap.
i bought a kiyo 2 days ago...it is absurd that the only way to make the webcam works with synapse was to uninstall the razer drivers and use the generic windows ones...and perhaps because of that ,cant find a way to change the resolution of the webcam, or is another synapse bug ? i need 60fps for facial recognition and can't find the way to do it your advertisement says you can choose between 1080p @ 30FPS / 720p @ 60FPS ..... please tell me how
My Seiren X seems to have an issue with capturing audio. Whenever I try to use it, it will capture in constant bursts of a few seconds of no problems followed by a sudden drop in volume or something, and just does that over and over. I'm not sure what to do here, as it even does this on another computer, where it also has a constant background beeping noise as well. Any help at all would be appreciated.
Reply below if you want razer to make a pcie capture card like the elgato 1. Yes it reduces the features that it can potentially have, but would be cool to have options for a more compact and clean setup. 4k60hz is preferred. If it is a possibility to have more usb and aux ports, that would be nice too. RGB is also a nice little unique feature for razer to add.
I just purchased the RipSaw for a week, tried to use either Razer RipSaw HDMI cable as input or PS5 HDMI cable as input, both experiencing the same issue. The output resolution from PS5 is HD 1920x1080. Changing it to 720p seems to solve the issue. (But I want to play it in HD?). It seems to be happening very often near the water in Astro's playroom. Can anyone assist me on this please?
I'm getting a tapping noise coming through my ripsaw HD. When I pass through to the monitor the sound is gone. But when I listen to the ripsaw audio through OBS or even just listen to the output in the recording section of windows sound control I can hear the constant tapping. I have tried taking everything off the USB board to see if it was to much, but that didn't help at all. I'm lost at this point and considering getting a different card altogether. Any help?
Hey all, I’ve seen a lot online about audio issues and I’ve tried a lot of the fixes but not making any headway. The only time I end up getting audio from the ps5 to streamlabs is when I plug in my headset into the ripsaw speaker jack. I usually have my headset and plugged into my controller for sound plus mic. Has anyone been able to sort this out? My other solution/problem was to just have it plugged into the ripsaw but then at some point buy a microphone, only problem with that is getting my voice to people on the ps5. Anyone with any recommendations or advice? I’m quite new to streamlabs so any help would be appreciated, and if you need anymore info let me know!
Every time I try to show any sort of Video using the Ripsaw, the video freezes on stream. I am not changing the settings for resolution or anything, and even if I wanted to there is not another one that I am allowed to change it to. The Audio meter also stops moving, but I am still able to hear the audio. I don't know why this is happening, I literally just got he product today.
Well, realistically one, but two would be nice. 1. A high quality DAC. I know it would be a lot to ask for a PCIE sound card, so I'll settle with a DAC. There are a lot of great DACs on the market, but I feel that this is an area that Razer should explore. I will always prefer hardware over software control. Something along the lines of the Mixamp or if they wanna go big, like the Sound Blaster AE-9 DAC (without xlr input). What I would like to see in this is the versatility and inputs of the Mixamp, but with better audio and amplification. Now what would make it huge, is if it is made to work along side the GOXLR or other audio interfaces. Which goes into my second point, which I feel Razer could really shine (if they don't cheap out on it), especially if they could do usb passthrough. 2. A GOXLR competitor. A Razer mixer. Something hardware and easy to use/control. And this is truly why I put this post in the broadcaster section. Mixers tend to be huge for streamers. Between audi
Hi team. I have an issue where I start my computer up. My Blackwidow keyboard lights do not start. It says that the streamer companion app controls the lights as I have have an emote display. I go into Synapse and turn the Streamer Companion App, off and back on to get the lights working again. I don't want to have to do this everytime I turn the computer on as sometimes, I just want to jump in and stream. Has any one else had this issue? Cheers
Dear Razer Support I got problem when i turn on my PC microphone seiren emote not popup light but sound is working. I try to plug off many time and back to work but i'm tired to do this every time. often it not light until i reboot PC and plug off and plug in many time. I hope you see this problem and fix. finally Thank you.
My Seiren X just started to pick up my voice as if I'm across the room even if it's just inches from my face. I know the mic isn't broken because it randomly worked earlier but is back to making me sound like I'm whispering. Here are the things I've already tried: Going to the Sound Control Panel and adjusting Levels. (They were already maxed out. There is also no boost option.) Uninstalling its drivers and plugging it back in. Unchecked "Allow applications to take exclusive control of this device." Switching USB ports. Installing Razer Synapse. It doesn't support the Seiren X, but I thought I'd try. Updating the motherboard's audio drivers. Any other piece of advice would be appreciated.
Hello everyone I hope you are very well, I just bought this beautiful microphone, but synapse 3 does not recognize it as my other accessories (mouse. keyboard, kiyo etc) this is normal or should I do something to be recognized? I'm looking forward to your help, thank you very much!
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.