Console Peripherals

I just got a wolverine v3 pro about 4 days ago, hoping that I could easily transition from xbox to pc and vise versa. I started to use this new one from my old scuf, and am noticing that when i press M3 (binded to B) or M4 (binded to A) it slows my right stick down a TON like i’m using it for the aim slow-down rate.i even tried assigning another button to the aim slow-down rate so maybe it would trick the controller to not use M¾ as the slow down buttons… didnt work.i have tried it both on xbox and pc. same problem… its like the default out-of-the-box settings won’t go away after clearing it and adding new binds.>any help would be appreciated. I love this controller and don’t want to have to get rid of it

Hey! I have a Big problem with my Wolverine v3 TE.Problem is that my Sticks are automatically changing. Sometimes works fine,than just self changing and not reaching the outer Zone.Sometimes are both just stays at the Top or Bottom corner.With these playing with this controller is not on option.I hope you can fix my problem,when not I will return my Controller.Because thats a Joke.I own this 3 days already but i havent got an 1 hour gameplay without Problems.Whats going on ?I have uploaded to Drive my Pictures and Videos from this Controllerhttps://drive.google.com/drive/folders/10J0nn95otCYgDYOO9gLk9YvjN9Nm-jjJ?usp=drive_linkThanks for your advice

I received my hyperspeed xbox in the mail yesterday 7/11/24. I unboxed and tested with my phone and my xbox. It had audio issues with the xbox after 10min. I then went on my computer to do the firmware update to see if that would fix the issue. After the update only one ear buds would connect to my phone s23 ultra and the other would go into pairing mode. Placing the one that wouldn't connect in the case would solve the issue, however I could only increase the volume and the mobile app won't connect to them anymore. I've tried on two other android phones and have the same issues.  I've confirmed that both ear buds updated. I've put both in pairing mode and tapped four times and held until they've both beeped twice. I've factory reset. Nothing seems to correct any of the issues. Any advice? I like the sound on this headset so I'd like to have fixed versus just returning them for a refund.

Is it possible to add a Feature so you can add Keyboard inputs to the Back Paddle of the Razer Wolverine V3 (both editions)

I have the wolverine v2 pro PS5 controller and the sony pulse elite headset for the ps5. If I'm only using the controller I have no problems but when I use them both at the same time I get some weird interference issues. The headset will disconnect and then reconnect every few seconds over and over again and/or the controller will make random movements on its own. While playing a fps game it'll do random 360 spins or a number of different random movements. The controller works perfectly when the headset is not being used. That is what makes me believe it's some kind of interference between the two dongles. Does anyone know of a fix for this? I like both products and they weren't cheap so I'd really like to avoid getting rid of one of them. I'm not the most tech savvy man around so if any of you fine people can help me out I'd be eternally grateful. Thanks so much for your time. 

I have the wolverine v2 and it wont vibrate in game whats the fix thanks

I have an Idea for a third Wolverine V3 Variant . But First lets Talk a little about my Razer experience first . Since my Xbox one i earned many Controllers from Xbox to thrustmaster and Razer . I love the extra shoulder Buttons and backpaddles  of the First and second Wolverine generations ,but with the Wolverine V3 that changed . Everything of the new Controller is very good but i dont Like the new Back Buttons because they are to near together on each Side . Each time i pressed one of the Back Buttons i Pressed both of one Side because of my Long Fingers . I only use the m1/m2 shoulder Buttons and the m3/m4 Back paddles on my V2 . So i thought about bringing a Controller between the Tournament edition and the pro edition with Just the m1/m2 shoulder Buttons and the m3/m4 buttons ,the exchangeable Stick Caps and the triggerstops of the pro Version but with a wired connection Like the Tournament edition . It would make me very sad to leave Razer when the V2 chroma Controllers Run O

I was using it when one of the side button get like in and then i cant click it, i have it since 2023  

Hi everyone I have problem with rubbers under X , Triangle, Square, Circle buttons are used and don't work as should be. Where i can buy that . It's torn on the sides. I will buy that small board bellow this too. Just where I can buy it? please  

Razer keeps upgrading their xbox controllers and I’m want to make a suggestion to them for new controllers. I want Razer to make new joycons and pro controllers for the Nintendo Switch, cause I know they can do it and it’s a dream to hopefully see it happen. (Razer I hope you read this one day lol)

Is it possible to configure the RH Joystick to have both “Look” and “Move” suchas how a trackball would funtion?

I was wondering if I can get my razer kaira pros for xbox connected to xbox thru an xbox wireless dongle and not just the xbox wireless feature to get less delay and better hearing. Also, I’ve been encountering rattling sounds in my right earcup when a low hz sound is playing, it really bothers me, can someone help me fix it? is it because my low and low-mid eq settings are both +6? 

Wife bought me the LE stormtrooper Xbox controller little under two years ago. I've barely used it it (maybe 50 hours total?) and right stick drifting really bad. It's out of warranty already so is there anything I can do to fix it? Seems like a colossal waste of money at this point. Can't really play anything with it.

I have my RAZER BLACK WINDOW V3 PRO keyboard which when I charge it and it doesn't charge the battery at all and it's still at zero I disconnect it and it's still at zero and it already updates the drivers and also uninstalls the clean synapse application and nothing is fixed helped methe light is green when it is connected to the pc and I disconnect it and it turns red and turns off 

Just received a Razer wolverine V3. It's by far the most impressive controller I've owned. Really couldn't ask for more from a hardware standpoint, but unfortunately I can't make the switch over from my xbox elite controller on alot of games that I play because of software limitations. Not being able to rebind 'stock' buttons like A B X & Y to other inputs, and not being able to bind directional right / left thumbstick inputs to paddles/shoulder buttons are features that I grew accustomed to, and are deal breakers for me. Would greatly aappreciate if this is addressed in a future update.

I just got the “Razer Wolverine V3 Tournament Edition” today. I tried using it with Forza Motorsport on PC, but it feels off. It seems like the controller only vibrates on the right side. I also tested the vibration using other built-in controller test functions, and it still feels like only the right side is vibrating. Is this a design feature of this controller, a defect, or a possible initial malfunction?

I cannot upgrade from version 0.6 to 0.7. 

Long story short. My Razer headphones were working fine with old controller. I buy a Razer wolverine tournament handset and now my razer headphones are cracklong and so are my spare headphones when plugged into the Razer wolverine. So disappointing. Are there any known fixes for this, please? I’m playing on XBox series s. Thanks 🙏 

Any idea when we might be getting this? The v2 rear button placement was always a negative for me and now with HE sticks plus new location. I'm really hoping this is in the works/coming soon. 

Hi i need help with my xbox razer wolverine tournament edition controller. I bought this a few years ago and recently the B button has been inconsistent. If i hold it down it works but flickers while holding it down if you know what i mean. Is this a problem with the button or the internals and how do i fix it?

I’m looking to get a new controller as I have been stealing my other half’s Wolverine V2. My set up is white/pink so I would like to get a controller in a matching colour - the V2 comes in white but so far the V3 doesn’t, and all the reviews I’m seeing say the V3 is far superior. I’m wondering if I wait it out to see if the V3 is released in another colour, or if I should get one of those Xbox Elite wireless ones in a custom colour? Open to suggestions and ideas, thank you! ❤

I just saw on the official instagram on a firmware update that help correct issues the V3 pro was having registering incorrect deadzone values. Will the tournament edition also need this firmware update out of the box? 

Hi, I’ve Just installed the new joypad for Xbox and I like it but there are some things could be better and it could be done by software. About the key mapping:I’ve seen it is possible to map only the M keys, meanwhile most of other pad I’ve tried (Microsoft Elite 2, gamesir Kaleid and so on) can be costomized also the standard buttons. ( For example, I program the bottom button to be like stick press (stick L and R ) couse in normal joypad I press them meanwhile I move my char and it do something I won’t. For this reason I program the standard button under stick to do nothin and to do the press stick actions I use the bottom button) The programmable button can only substitute the standard key and nothing else. The same other pad I use can program also other funciton like “do nothin”, “screenshot”, “make a video”, “shift” and other Xbox functions Just pressing an M button.What do you think? We can hope these function will be i

I’m not seeing a clear distinction be made yet, I know the V3 pro comes with the Case,  but does the Tournament edition come with the swappable thumbsticks?