Mice and Surfaces

That mouse is a shame I guess Forgot to mention that the scroll click was broken doing double clicks and not regging since day 50 after purchase. that mice's build quality is worse than THE VIPER ULTIMATE's quality

Hello. My Pro click just died!!! RZ01-0299 No lights not charging nothing! As I'm reading there is a lot of same problems and even after 3 months of use. FIX: Ok this was just strange. I turned off the mice and plug it in adapter to charge. Then I started to put the cable in charger and out and while doing this I turned the mouse ON. And it started to work!!! So If this is the solution for "DEAD MICE" I hope someone can bring the mice from the dead...

When you break down the stats of the four current NAGA choices, the Left-Handed would be my choice... except, it is left-handed. Please make the Left-Handed NAGA in a Right-Handed version. Until then, I am settling for the Trinity NAGA (okay NAGA). I'd move to the NAGA X, but I don't want to give up 3 programmable buttons. The whole point of the NAGA is more buttons. Why did you remove 3 from NAGA X anyway? Left-Handed NAGA for Right-Handed people please, with the braided cable. :) Ref: https://www.razer.com/pc/gaming-mice/naga-family Scroll to the bottom half of the webpage to see the comparisons.

I purchased the Viper 8KHz looking for a fast, precise mouse for gaming and 3D CAD, and to suit a fingertip grip. And it has exceeded all my expectations - it's a joy to use and I find the ergonomics just perfect. Unfortunately there seems to be one fatal flaw - the scroll click only registers when I press very hard. I use the scroll click to pan around 3D models so this issue makes the mouse nearly unusable. I've tried the suggestions of trying to clean any dust that may have gotten in with compressed air, but it hasn't worked. It was like this out of the box. Wondering if anyone else has had a similar experienced?

What is the best mouse

Hello! Today, in the morning I was using my pc for about half an hour, mouse was working perfectly as it should. After a few hours I got back, ready to play some games but randomly and for no reason my mouse is not working anymore. Before I booted my pc I did a quick mouse clean, with just a cloth. Then the mouse LED went on for no reason, I booted my pc and mouse is not working anymore. It's not getting recongized by my pc or synapse 2. I tried uninstalling all the mouse drivers/usb drivers, completely uninstalled razer drivers (I also happen to have blackwidow v2 keyboard), disassembled my mouse to check if anything is faulty but still nothing. It also doesn't work on other computers that I have in the household. How is this even possible? I've used this mouse for years, 0 problems. I refuse to believe it suddenly just fell apart and won't work. I would really appreciate it if anyone could provide a solution or suggest something. Thanks in advance! EDIT: Bought a new mouse. Technolo

I was given a Razer Sphex V3 recently, and it's my first plastic adhesive mouse pad. I've not used adhesive pads before. I like how it's firmly affixed, but my question is, what do I do when I decide to move it? (because I decide to sit differently or just change desks) It seems like the adhesive properties will be quickly lost and the bottom will gather dust and particles very quickly if I take it off, similarly to protective glass for smartphones. I'd like to hear about the others' experiences with these things.

hi, recently I've tried to mod a razer DeathAdder essential. The problem is that I can't figure out which wire in it is used for what purpose. it would be great if someone helps me out with this

Does the basilisk ultimate work on chromebook?

I just updated my Razer Synapse software and my Deathadder Essential is only allowing a max of 1000 dpi. i play on 2400 dpi normally so my everything is messed up when i try and game. please help asap. I've tried sending in a support but it just gives back error messages

Hello, I purchased the Razer Orochi v2 and installed Synapse on Win 11. With my old Roccat Kone I could press the "Mouse Button 4" and then scrolling the wheel would scroll the volume slider. In Synapse I can't see this option and I dont want to waste 2 mouse buttons for volume up or down. Is there a way to use the wheel to do that? Thank you!

HELP!!! The usb receiver (used for wireless range extension) on my charging dock for the Razer Viper Ultimate doesn't work. It's not registering the USB when it's plugged into it at all. Is there a way to fix this or is the charging dock just faulty?

So i have the Viper for about a month now and this very strange problem. Windows fails to recognise the Viper 8Khz when i lift it up. What happens is this: as soon as i lift the mouse, windows disconnects and reconnects the mouse several times in a row until a windows error message comes, saying that windows failed to recognize the usb device. I have tried uninstalling and reinstalling both the mouse drivers AND synapse 3 a dozen times now. I have a Windows 10 64 bit system. Any help is greatly appreciated. Thx.

Hi Hey all, Im looking to buy an MMO mouse. I came across the Razer Naga Pro and the design + swappable panels seem to fit what I want. However, I am aware that razer has had a lot of quality issues with their gaming mice. I haven't owned a razer mouse before, so Id like to know after months (or years, I'm not sure when it was released) of use, have owners of the Naga Pro had any issues? I read are that there are double clicking issues, mouse being irresponsive, software is buggy/ not supported etc. I'm not looking for affirmation or anything, I'm just looking for an honest review. I will greatly appreciate everyone's help on this since its quite an expensive mouse, especially in my currency. Thanks in advance!

I have a Razer Basilisk X Hyperspeed and have been using the special DPI button on the mouse to switch between precision aiming and normal mouse DPI, but I've found it's positioned terribly and I often move the mouse around when I try to click it. Is it possible to configure a keyboard shortcut to replace it's function? As in, to switch between DPI profiles from the keyboard instead? I don't have a Razor keyboard, however.

Hello lately my mouse stops working while its lights are still up.Also when i charge it,synapse does not recognise that i charge my mouse

Razer issued a firmware update for the Viper V2 Pro mouse on June 15th 2022 that just came out on May 10th 2022 which contains a couple important fixes that are related to the power and battery. Main Fixes in Firmware Version 1.01.01: Fixed power consumption issue Battery life improvement Download the firmware updater @: https://rzr.to/YBzK3d Instructions if you need them are @ (even tho they are pretty straight forward mostly): https://mysupport.razer.com/app/answers/detail/a_id/6089 ⚠️IMPORTANT NOTE: DISABLE ANY 3RD PARTY ANTIVIRUS PROGRAM YOU ARE USING OR THE VIPER V2 PRO FIRMWARE UPDATER WILL NOT WORK!⚠️ I tried to use the firmware updater with a 3rd Party AntiVirus program enabled/running and it just throws errors when trying to launch the firmware updater, which

Hi I'm planning to change my Logitech keyboard/mouse to Razer. I wanted to buy a Razer Basilisk V3 but I see that the Razer Viper Pro V2 just came out with a new sensor and new 3Gen switch. I don't know the habits of Razer at all. Do they release upgraded existing products? I mean, could a Razer Basilisk V "3.5" with the new sensor and 3Gen switches come out very soon or they never do that and I can buy the Basilisk V3 without fearing a new model omegle shagle coming right after?

This happens a lot during fps games as I tend to flick the mouse a lot. It disconnects (the light turns off) and then it reconnects again (the light turns on again). However, this does not happen if I plug the mouse in.

So I got the Deathaddder v2, but my hands are so heavy, that the mouse feet got completely got worn down after only 30 minutes of use. Are there mouse feet out there which don't get worn?

does not recognize my connected mouse, restart the computer, reinstalling the driver returned nothing

Hi everyone. I have just bought a Blackwidow V3 Mini keyboard and a Viper Ultimate mouse and have got them running OK using their respective 2.4G dongles. However I was hoping to get them both running off the same dongle but after a quick internet search I know realise the mouse does not support this feature. Its not a huge issue for me but I am wondering if multi-device Hyperspeed is likely to be incorporated in a future firmware update for the Viper Ultimate, or is it just a case of waiting for a future version of this mouse with the feature to be released?

can someone help me i have a razer naga pro not even a year old and i was gaming with it but i took a break watched some anime but when i wanted to use my mouse again it was turned off wit the switch was on so i tryed to plug it in my pc to charge but it still doesnt turn on after 2 hours help

I got a Razer DeathAdder Essential for $15 a few weeks ago. I've been using it as my daily productivity mouse and I can say that this is easily the best mouse I've ever used in my life. This is the first gaming mouse I've owned and I'm very impressed by its performance. That being said, I plan to use this as my daily mouse for all my computer-related tasks in school and during my free time. My computer is a MacBook Air and I prefer to use the DeathAdder instead of the trackpad. I'm pretty old-school in the sense that I prefer to use mice over laptop trackpads for day-to-day use. Anyway, I don't intend to use the DeathAdder for gaming (at least for now). I'll probably only use it for daily computer work in school such as Excel, Word, as well as for browsing on sites such as Google, Youtube, and Netflix. Aside from this, I also plan to use the DeathAdder for basic graphic design projects on Adobe Photoshop and Illustrator. So yeah, how long do you think om

Hi Can you sync Razer products to armory? I know lian LI software allows syncing to Mobo software, but can't find a definitive answer about razer. Thanks in advance.