Mice and Surfaces

Greetings to all,I have recently see a post on reddit of people peeling the bottom of their mouse. I never did it. I was wondering, is it to be done? Change something or is it indifferent?Does it serve to protect the writing or should it be removed?is it wrong to remove it?Picture attached for reference 

Hey, so I purchased this mouse directly from Amazon UK warehouse brand new at around £70 and when it arrived the sticker was in place normally. However, you could easily open the box and put the sticker back without evidence of it being opened.In the box were two of the same warranty cards, is that normal?The mouses cable wrapping, made of woven nylon cloth, was bagging/crumpling up at the end. I could pinch it and roll it down as if it was cut too long, is this normal also? The cable was wrapped and held together by a rubber tie but did not look neat, is that normal?Thanks, I just wanted to verify if I got a used or defective one.

Can one Mouse key be set to a different DPI setting than the others (Razer Naga Pro)?

Wonder when it will be available in the US store 

i have a razer orochi v2. i have replaced the batteries and uninstalled the drivers for the mouse and restarted my pc but i still have the same problem. my mouse works fine when i open “device manager” on windows and when i restart it works for a few seconds then it begins to bug again. the cursor moves itself to the top left of my screen and. no matter what i do it continues to do the same.

What are some observations and opinions about the use of microphones in a particular game, particularly in relation to cooperative gameplay and communication? How does the speaker express their preference for non-verbal communication within the game and highlight the existence of a unique in-game language that eliminates the necessity of using a microphone?

What are some alternative options to the "Razer Naga Trinity" gaming mouse? In your personal experience, which 12-key thumb-button mice would you consider the best?

So I just bought this mouse because it seems great for palm grip. But using it now im kinda suprised. If I hold the mouse with a straight arm and drag it horisontaly to either side with my wrist it seems to track diagonaly a bit. So if I want it to go in a line I need to turn the mouse to the left bending my wrist with it. Since im used to a standard mouse this movement seems forced. Is there anyway to adjust this. Or could someone confirm if this is normal for all these mouse?

I have a strange question, but am i the only one where the rubber is slightly peeling of? i have a Basilisk V2 and somehow i only see razer mice with rubber on it where released this days. is there a good New mouce with no peeling Rubber? ^^

Despite wireless being one of its greatest features, I’m thinking to use V3 pro as a weird mouse for the MOST of the time, to save battery life and avoid the hassal of charging.  However I might still use it occassionally on other device like my TV/laptop. My question is, if I use it as a weird mouse that way, would the mouse still get constantly charged even though I  dont deattach it?  By constantly, I mean, you know all battery will inevitably discharge below 100% after certain time laspe even without use (I dont know how much the drop is or how long does it take to drop below 100% in this case).   If it drops, then would V3 pro get charged instantly to 100% because it’s wired all the time?  If the answers are all yes to the above, then I’m very concerned about the battery lifespan.  First I’m not sure if it’s a good idea to keep the mouse fully charged all the time (that sounds like a very bad idea to me).  Seoncdly  It seems this wear and tear is very minimal at the first place, b

??

For the mouse Razer Naga X (or other similar mice): Can you only assign macros to the side buttons or can as well work as independent buttons from keyboard? This is, can I assign a button for example in a game without having a macro or binding with existent keyboard keys? Hope I explained well my question. Sorry for my english and thanks in advance.

I have a viper ultimate that has no life the dock powers up and works fine the mouse its self doesn't power on at all 

https://streamable.com/1zjkmoHola no se que hacer mi mouse dejo de funcionar lo abrí y nada, solo suena y el la luz del dpi es verde y solo parpadea, cuando lo enchufo, cargo y prendo solo parpadea el dpi verde sin mostrar leds ni nada 

Hello there! I bought a Razer Basilisk X HyperSpeed today, everything is great i love it, but one small thing is there i’m thinking about it a lot, I bought 2 recharge able Ni-Mh batteries for this mouse and works great with it, the battery in the box is 1.5v AA battery and mine Ni-Mh Orion batteries are 1.2v, is there any problem? does this effects performance and latency or not?

i was trying to buy the razer viper mini in india but for some reason it is not available in any website 

Razor Naga X Scrolls up occasionally while I am scrolling down.It makes the mouse extremely difficult to use. There is no known damage and nothing happened to cause the issue that I know of. It just started happening a few days ago with no change to the mouse settings. I looked and cant find a new firmware for the Naga X either.

I bought my viper mini a year ago and has been working perfectly fine since then but this morning, I noticed that it stopped working. There's no light at all that signifies it's even plugged in. I tried plugging it in a different computer but still no changes.  

Three weeks ago, I purchased a Razer DeathAdder V3 Pro. However, I have noticed that its battery life falls short of my expectations compared to my previous gaming mice, the G Pro X Superlight and Razer Viper Ultimate. While those mice required charging only twice a month, the Razer DAV3 needs to be charged every 2 to 3 days despite playing for 6 to 8 hours per day. According to the Razer website, the mouse should last up to 90 hours of constant motion at 1000Hz. This leads me to believe that the short battery life is not normal. Should I return the product for repair and replacement (RMA), or is this a common issue among users? Thank you for your help.

I am not a gamer but I use Photoshop and InDesign a lot. I also do NOT use the mouse wirelessly -- when available I find a wired connection to be more stable. It’s taken me awhile to tweak the settings so that they aren’t too sensitive. Click-hold-drag can be particularly troublesome, as well as keyboard/mouse combination commands. Many MANY times I swear the left and/or right mouse buttons are responding to the PROXIMITY of my hand, or perhaps I really AM coming into contact with the mouse buttons even though I can’t feel it on my skin. The problem seems to get worse as the day goes on. I also suffer from hyperhidrosis of the hands (sweaty palms) which gets worse as the day goes on. The next morning the mouse (and my hands) will be mostly back to normal. Also, my hand is a tiny bit too small to accommodate the length of the mouse which might be part of the problem.I tried using thin “jewelers gloves” but the problem persisted, perhaps because the cloth of the glove was coming into con

What are some recommended places where one can test out computer mice from companies like Logitech and Razer? 

Hi.So I just bought the basilisk v3 since it seemed great in the shop for a palm grip. Got it home and found that it might not be perfect with a big hand, specialy with the sniper button blocking. The biggest thing that I wonder about doh is the movement. If I keep the mouse straight, and move it side to side it wil track diagonally. It seems I need to twist the mouse to the let a bit for it to go perfect left and right, and in such bend my wrist a tiny bit. Is it how it should be, and is there any way to fix this? Because it forces the hand into a more claw grip stance or  rotating the mouse in the hand.

I have been trying to figure out which mouse to buy but I dont know if gen2 switches are better than ttc gold...I like the shape of the basilisk v3 but I want a good gaming experience so if anyone can help me with I would be grateful

All my peripherals have been stable af for quite sometime now. Synapse took an 20230502 update and now my Naga Pro drops like crazy in games.

My mouse works perfectly fine if i dont have Razer Synapse installed, but as soon as i install it it starts freezing for a random period of time on random interfvals and i cant figure out why. The only solution i found was uninstalling Synapse but then i cant use the Macro software. Does anybody know how to fix my situation?