Razer Synapse 3

While playing cs2 with faceit, anti cheat prevents me from using macros. When I turn off the anti cheat software, my macros are active again. how can i handle this

Hi all, today while i am updating razer synapse, my pc restarted due to a fault and light. Since then I can no longer boot Razer Synapse, when trying to reinstall the installer it doesn't open at all. I've already uninstalled everything related to Razer from my PC, but I still can't, any ideas? 

Recently im trying the new Synapse version but i have notice a few bugs on it.Gear: Razer Huntsman Mini           Razer Viper Ultimate The automatic profile switch doesn't work, it doesn't detect the game you setThe Chroma Doesn't work properly on the mouse, if you create a new profile on chroma the mouse will set the default light but if you add any effect later the mouse doesn't show any profile, light or color.if your mouse, or keyboard gets unplugged or idle battery mode the chroma profile switch auto to chroma presets, so you need to go chroma and switch the whole light profile to get back to your profile.hope it get fixed soon :D 

I currently have a Razer Deathadder V3 Pro. I have had this mouse for just short of a year now. About 6 months ago, I started to experience my fps drop whenever I actively am pressing a macro on my mouse. As soon as I stop using the macro, my fps rises back up. I am not sure if anyone else has encountered this issue or knows a solution but anything will help. Thank you.

I’ve tried the new beta Synapse twice now, and both times I’ve uninstalled and gone back to Synapse 3 within an hour. I waited until the Tartarus Pro was supported and took the plunge to try the beta, but I wish I hadn’t.I can’t understand why the beta spins up 10-20 sub-threads which take 20%+ of my CPU whilst starting, why I have to unplug and reconnect my devices (BlackWidow Elite and Basilisk v3) for Synapse can see them, why it crashes repeatedly, why it doesn’t see a linked application has been started, or how Razer has the temerity to say that the beta is faster, more stable, and has a new improved UI (which looks exactly the same as the Synapse 3). The only improvement over Synapse 3 is the speed with which the “Linked applications” system works; dragging and dropping an app is much much simpler, and the page doesn’t refresh its list of found apps every time you click out of it - caching is so much fun!I’ll hold out with Synapse 3 for as long as I can

Good afternoon, I purchased RAZER kraken x lite headphones yesterday, there is no activation code for the application in the box, how can I get it or restore it?

Huntsman Mini's fn key mapping set by default in hypershift is different and cannot be used( Direction keys set in ijkl, various multimedia keys )It's set completely different from what's engraved on the keyboardI think it's an error, don't you need to fix it?It's a sentence using a translator, so it might feel awkward. Please understand

I am experiencing some problems with Razer Synapse since the latest update I installed today. See bullet points below:Razer splash screen is showing as expected when I start my PC When I mouseover the green Synapse logo in the taskbar, the logo disappears (seems that the app is crashing upon mouseover) Razer Synapse 3, Razer Synapse Service, and Razer Synapse Servoce Process are all showing up as running in task manager even after mouseover in previous point When I attempt to launch Synapse manually, the taskbar icon re-appears, only to disappear again upon mouseover. RInse and repeat. My mouse macros ARE working, even after taskbar mouseover My keyboard macros ARE NOT working, both before and after taskbar mouseover

I can’t register my mouse because my cousin gave it to me and it came with his pc. So he doesn’t really know when he got it or have a reciept.

trying to callbrate the DPI on my Razer Naga X and I noticed that the Enable X-Y Slider option is missing. It used to be there for the Razer Naga Hex. Anyone knows if it’s a razer naga X issue or is there something I can do to enable it?  

I can not install the new update.When I try to update it says Update failed to complete. Please contact technical support. But when I tried to uninstall and install the newest one I get an error code : Error code 1603So for that I went back to previous version. Razer please fix this or give me a solution.  Here is what I tried ;Uninstall,Install (Failed like i mentioned above)Try to update from Razer central,Add an exception to firewall,Disabling firewall (I dont have any antivirus program)Update Windows,Install dot net frameworkClosing background razer programs Non of them succeed.

Hi, I’m aware this feature has been requested multiple times over the past years. But is there any progress on this?Other software like reWASD actually can do this for Razer keyboards.. making synapase almost obsolete / even a bit behind in some regards. Please let us know!  So detection: On key down (present)On key release (not present) Thanks 

Razer Naga Trinity not working with new Synapse Beta. Chroma Beta shows the effects, but no visuals on the actual device

I’m brand new to Windows and Synapse 3.0 (Synapse 2 didn’t support Macs). I found a good explanation of how to map keys to my Tartarus. It’s this 4 step process involving multiple dropdowns and button presses BEFORE you can actually set the key. Is there an easier way to do this? Like being able to right click a button and press a key. (and I know this example isn’t there, it’s just to illustrate what I mean). This may be a silly question to some, but what a pain in the rear it was to set all my key bindings.

Synapse doesn't detect my RAZER BLACKSHARK V2 X - WIRED GAMING HEADSET.  I don't know what to do and no guide helps

Hello! I just bought my headset and when i register the device, it says that the device is already registered.  What should i do? 

1.

So I'm trying to connect my videogames to my Govee LED light using Razer Synapse. However when I look at the tutorials on how to do so they say go to the “profile” tab but I don't see it. Help would be greatly appreciated.

HOW??? HOW IS THIS STILL AN ISSUE?!?  People have been complaining about this for LITERALLY over 3 years now and you have yet to fix the problem!  It’s gone away temporarily and been reintroduced at least 3-4 times based on my own limited searching of these very forums.The ONLY reason I even purchased this was because I needed a mouse with programmable buttons that would retain their functionality over a bluetooth connection.  The ONLY one I could find was a Razer.  (I bought and returned 3 or more before eating the insane cost to get the functionality, only to run into this problem.RAZER: This mouse cost ~$180!  For that kind of money, not only should this mouse be impeccable and BEYOND reproach, your driver should be ISSUE FREE, or at the very least an obvious responsiveness to user issues.  But SOME crazy how, this shoddy driver not only requires people to log in to your ridiculous, pointless Razer account just to use it, but also eats up nearly a quarter of the CPU

I have an asus rog laptop, and after downloading the razer synapse it catches the windows mistake. Can I download it on my laptop without any problem? 

My Razer Synapse has always been on auto start up and has been working as per normal as always, i.e. mouse, keyboard and headphone lightings always go to the mode I set. However, over the last few days, I realized although Synapse has been auto-startup, it can’t detect of my peripherals. My keyboard will go to default lighting mode and I had to restart the Synapse app for it to detect my peripherals. This is quite annoying as I am already starting to hate all Razer products for quality reasons. Anybody knows how to fix it? I tried reinstalling the app.

Hi,I had problems with synapse 3, in which my mouse and keyboard disappeared (support didn't know how to help me) and now I installed the v4 beta, which works fine for now but keeps the computer awake all the time and when the monitor wants to turn off, after 3 seconds it turn on again.When I uninstall synapse v4, the monitor normally turns off automatically (goes to sleep) if I'm not using the computer.How to make synapse not ping the computer constantly?

Hi.I wanted to ask for help.I installed Razer Synapse Beta and it works very well overall.It seems that all the devices are already included (okay, only the fans connected to the controller are going crazy, but that can probably be fixed).However, I have a problem with assigning a button that would turn off the backlight in all devices.Previously, in Synapse 3, I had created a keyboard skin where after pressing Fn + F4, all lights (in the keyboard, mouse, pad, fans, etc.) turned off.Now I can't recreate something like that.Does anyone have a ready-made guide on how to create something like this in Synapse Beta?

The Razer Synapse software has been updating every day for weeks. I understand that current software practice is to do frequent deployments, but even so this is ridiculous. I've begun to wonder if the update is failing, so I got into Windows' Event Viewer. I didn't see an error related to the updating process, but I did find an error in the Razer Synapse Service: [INDENT]Log Name: Application Source: Application Error Date: 11/10/2022 8:13:51 PM Event ID: 1000 Task Category: Application Crashing Events Level: Error Keywords: User: SYSTEM Computer: MYCOMPUTER Description: Faulting application name: Razer Synapse Service.exe, version: 1.0.0.0, time stamp: 0x633dca52 Faulting module name: KERNELBASE.dll, version: 10.0.22621.819, time stamp: 0x1355b9cf Exception code: 0xe0434352 Fault offset: 0x00147402 Faulting process id: 0x0x1F0BC Faulting application start time: 0x0x1D8F509DAB9945F Faulting application path: C:\\Program Files (x86)\

Dear Razer Support,I'm reaching out to inquire about a specific functionality within Razer Synapse 3 that I'm hoping to utilize for my setup.I am currently exploring the possibility of creating a macro that, when triggered by a button on my Razer Basilisk Ultimate mouse, will simultaneously switch the profiles of both my Razer Cynosa Chroma keyboard and Razer Basilisk Ultimate mouse to predetermined profiles within Razer Synapse 3. After reviewing the available options within the software, I noticed that there isn't a direct command available in the macro editor to achieve this functionality.While I am aware of the option to create a macro that pushes multiple buttons or executes multiple actions sequentially, I am seeking a more streamlined solution. Specifically, I am interested in utilizing the "run command" option within a single macro, allowing me to input commands that trigger the simultaneous switching of both keyboard and mouse profiles, as well as turni