Systems

After my Razer Blade 14 2021 goes to sleep, it never turns back on. I try moving the mouse, pressing the keyboard, pressing the power button....nothing. The only solution so far has been to hold down the power button then restart the computer...this has become a problem as I have lost a lot of unsaved work. I have disabled fast start and hibernation without success. What can I do to get over this problem?

I want to order a Razer Blade 14, but with a different keyboard layout. I'm currently located in the US. But I would need a German Keyboard Layout. The German Keyboard Layout has one additional physical key compared to the US Layout. So even by switching the keyboard layout in Windows, I will miss a key.

Hi, does anyone experience something similar. Sometimes my external keyboard and mouse stop responding after suspend. I have connected them via USB-C, it is not the hub. And reconnecting the hub, replacing the hub with a different brand does not make them work. I need reboot the laptop, then it is fine again. Thanks, km

I very interested in Razer Blade 14. I live in UK but I prefer US (or just international keyboard layout). There is an option to change it when purchased? Are there alternative solution?

Hi, I am having issues with my touchpad after supend (Linux always, Windows sometimes). It seems to be realted to the bios and it has been reported not only for the blade 15 but also 17. I was wondering if the Razer-team is addressing this at some point with a bios update? Cheers, km

Hello, Couple months ago Razer released a BIOS Update for Razer Blade 14 (2022) which is no longer available on the Razer Support website. The filename was "RazerUpdater_v1.1.1.3_PI480-BIOSv0207.exe" Can anyone assist me in getting this BIOS update file? Cheers!

I did an upgrade to my laptop recently and the bottom screws just suck. A few became stripped with very little pressure and 2 even broke in half, leaving part of the screw in the laptop. So this thread is help for two different things. One) Does anyone know what size torx screws I need, I'm finding many results/answers online? Two) Does anyone know the best way to remove the bits of screws left in the hole on the bottom of my laptop?

I realize this question may not be appropriate for this Stack Overflow, but I couldn't find one that was for Windows or otherwise more relevant. If so, I apologize and would appreciate being redirected to the appropriate place. Also, I am a programmer and I'm trying to accomplish this to increase my productivity while programming on Windows. The Problem I have a Razer Blade 14 running Windows 8.1 which has a multi-touch trackpad. I would like to use two finger-tap to right click but the tutorials I've found online indicate I edit somewhere in RegEdit that doesn't exist in my own. Does anyone have ideas on how to omeglz solve this problem? Thank you!

does the Razer tomahawk atx come build in or not, and if not are there any cheap or good build desktop or

I do have quiete a good opportunity to buy a Razer Blade 14 RTX 3060. I mainly want to use it as a "mobile" Gaming device with a Screen (Alienware AW2521HFA). Do I have any downsides besides that the 3070 is slightly more powerful? Im really not that into laptops ive read that the 3070 version comes with a 1440p screen but when Im using my alienware screen that doenst really affect me am I right? Are there any benefits of the 3070 version that I'm not aware of?

I bought a razer blade 14 3070 model and the performance is terrible with it being plugged in and on boost mode on gta 5 it can’t even reach 60 fps on 1080p and other people I have seen with the same laptop doing a benchmark test get 80 - 110 fps I have tried clean installing Nvidia drivers before but nothing chat seems developerbook to work

Greetings Insider family. Been gone a long time, but I'm usually lurking. So long story short I'm interested in the newer Blade 14 laptops. There still seems to be very few reviews of the machine on the internet so I'm hoping a few members have gotten a hold of their machines and would be willing to share some performance numbers so I can decide between the 3070ti and 3080ti model. Once I make a choice I'll try to write up a review for everyone.

What am I doing wrong? Here's my setup: 2022 Razer Blade 15 w/ RTX 3080 Ti (RZ09-0421PEF3-R3U1) Razer Thunderbolt 4 Chroma Dock Razer Thunderbolt 4 cables (active, 2 meters) 2 LG 27UP850-W monitors @ 4K 60Hz I cannot make this setup work, no matter what. Razer active TB 4 cable plugged into the left TB port of my Blade That cable is plugged into the front port of my TB 4 dock The monitors use the ports on the back of the dock When I plug in one monitor, it works, of course. I plug the second; it does not receive a signal. I unplug the first one, and the other one turns on immediately. I tested this with the latest Nvidia Studio drivers v522.30 and the old v512.95 Gaming drivers (because of this old issue /blade-17-external-monitor-via-usb-c-thunderbolt-4-not-working.86737/page-5#post-820532), but nothing seems to work. Any ideas? 😫 Thanks! --- Edit 1: Workarounds I tried: Tried different cables. Right now, I'm using the official Razer Thunderbolt 4 active cables Indiv

Hey - Is there any way to get the usb-c port to use the dGPU instead of the iGPU? Like, is the only way to output the dGPU to an external monitor to use a hdmi cable? Thanks

Hi guys, just wanna know if the Hanbo can used for the new AM5 socket.

I'm going to replace a Razer Blade Stealth 2017's battery and figured I might as well upgrade the SSD. Right now I have a 512GB but, can I upgrade to 2T? Most answers I find online are for the 2019 model. Thanks.

When on or in sleep mode, the laptop is charging fine through both USB-C ports. When off or in hibernation mode, if USB-C charger connected at time of powering down, laptop is charging ok, too. However, if the USB-C charger is not connected at moment of power-off/hibernation, the laptop would not charge through USB-C ports, if USB-C power is connected subsequently. Could anyone else please confirm this, and if so, is this a firmware bug? Many thanks.

How long are the DisplayPort/HDMI/USB cables that come with the Raptor monitor? Thanks! -Chris

I have razer blade 14 2017 uhd touch screen RZ09-01953.i would like to know if i can downgrade the screen to a screen from razer blade 14 RZ09-01952.

I recently bought this razer blade 15 advanced (2020) Win10 with NVMe CA5-8D512 ssd 512gb. It was running perfectly fine at first, intil yestarday I found sequential write in speed dropped around 400mb. Is there anyone encountered the same issue or could point out a solution? Thanks in advanced.

I tried all recommendations on your site but apparently it didnt work, the black screen is still there but the keyboard and all other functions are still intact. At first it was just flickering until there was only black screen. I tried plugging it on an external monitor and it works just fine but the black screen from my laptop is still there. I tried repairing it and the technician said there is something wrong on the motherboard. Apparently a "chip set" is damaged or something. Why is razer so expensive yet so easy to break. Now i cant use my laptop for work. It sucks. I want a refund for a very expensive yet UNRELIABLE device. :(

my fans are on full when my systems is not running? I've turned off Synapse and I have the fan settings at Auto, but I've tried manually reducing them to the lowest setting as well. What can I do to address this?

Anybody knows how can I program my Razer Blade 15 (2018) to start up every day at the same hour automatically?

"Do the Air60's feet slot into the laptop's (Razer Blade 15 2022) grooves between the keys without pressing or interfering omegle with the keys on the laptop?"

So I currently have a razer blade 15 240hz and 2070 max-q. And i have this issue on my laptop that i still have for a really long time now. Its the rattling noise of the vapor chamber gpu side or the left side. It started when i replaced the factory thermal paste to a new one because i have been using it for 1 and half years now. But after i placed everything back the rattling noise started it only makes the noise during gaming or when the gpu is working. I have tried many different ways like replacing the fans and replacing the paste again but the sound is still there. I hope that there is a solution to this problem on what I can do to fix it. And because I’m living in the Philippines, where there is no razer store. It only sounds when used in gaming. Can someone please help me!