- 199 Threads
- 754 Replies
I got a seiren mini microphone awhile back and just used the stand it came with .. went to put it on a boom arm with a 3/8" to 5/8" adapter only to find the adapter was too big. When I googled it razer's site says it has a 5/8" thread but apparently no so. Can't seem to find any 3/8 to 1/2 adapters so its looks like I am SOL ..
Hi. Capture card is Razer Ripsaw HD. Getting constant audio cracking sound.DPC latency checker showed nothing out of the ordinary. Tried different hdmi cables, different usb ports (3.2 is used right now). Reinstalled audio drivers, Razer Synapse. Disconnecting all usb devices did nothing. Video
I recently purchased the Razer... and i tried plugging it into my Mac USB port. But absolutely nothing happened. And i tried everything. I bought it to use on my MAC. Finally i went downstairs & tried it on my PC (Which i don't even have Video recording software on) And it popped up there & had me install the Software. I can't use my PC downstairs. I HAVE to use my MAC. Is there any way to get my Razer webcam to work on my Mac Laptop or what? I don't want to return it. I also have a warranty though.
So I just got my Kiyo, been playing around with it and noticed 2 things. 1. My lighting in my room sucks causing me to look washed out at all times, My plan to fix this is to buy a new light fixture in the room where I can manually direct light away from my workstation. 2. When i use the Light on the Kiyo with the lights in the room off, the picture looks distorted. Has anyone else had these issues? I'm still playing with the settings of course but wondering if anyone else had these issues.
I just purchased the RipSaw for a week, tried to use either Razer RipSaw HDMI cable as input or PS5 HDMI cable as input, both experiencing the same issue. The output resolution from PS5 is HD 1920x1080. Changing it to 720p seems to solve the issue. (But I want to play it in HD?). It seems to be happening very often near the water in Astro's playroom. Can anyone assist me on this please?
Hi team. I have an issue where I start my computer up. My Blackwidow keyboard lights do not start. It says that the streamer companion app controls the lights as I have have an emote display. I go into Synapse and turn the Streamer Companion App, off and back on to get the lights working again. I don't want to have to do this everytime I turn the computer on as sometimes, I just want to jump in and stream. Has any one else had this issue? Cheers
Hi everyone i have just received my pro ultra, and have been setting it up anf playing about with it in OBS, but i have just noticed no matter that i do i cang get the white logo on my tshirt to be sharp, it always has a white bloom around it like its out of focus, but then i notice so do all the edges, am i doing something wrong?You can see what i mean around my tshirt logo, but also around the outline of my hand, and around my ear as well.I have played with every setting and changed the lighting in the room and cleaned the leanse nothing changes it.Jamie.
I just got my Razer Ripsaw HD capture card set up so I can try to steam some ps4/switch/and other console games. I am running into and issue where my streamlabs obs video output for the stream is tinted pink and I haven't been able to find a solution for the issue. So I was wondering if this has been a common issue for other users and if anybody has been able to resolve this problem? Thank you to anybody that does reply
Hey there, i'm new to this forum. I have a lot of razer product but i did not ever buy a Razer capture card Let me go straight to the point: i'm an italian retrogames streamer and my capture card Is broken. I'm thinking about to buy the Ripsaw HD biit, since in my setup i use an OSSC for upscale old console i would like to know if the Razer Ripsaw HD will capture the ossc signal in a good way like the old one that i use until wednesday. Thank you in Advance at all the people of the community who Will try to help me. I Will do my best for helping you with other Razer products.
I have used my Razer Seiren V2 X for a while after a long tutorial. But I found it was still incomplete, so I went back to its base state, which I already went through. It picks up every single keyboard click, even my throat clicks despite being away from my mouth. The mic is advertised as not picking up clicks and stuff, so why is it so incompetent at that? Can anyone who has it show me how they set it up. Because without software, how is this mic functional?
With its customizable keys and dials on one convenient platform, let your creativity flow with the new Razer Stream Controller: https://rzr.to/stream-controller Powered by Loupedeck, find all the tools you need to manage your stream with ease so you can focus on delivering the best content for your fans. Coming soon.
Before I buy one, I need to know whether the KIYO will work on a 2-hour Zoom meeting. I’m not a gamer, but the camera on my Desktop Mac M1 is very poor. I need to present a better image of myself. What difficulties will I face? Where can I find good instructions?I read that I should install a Razer program called XSplit Vcam, and open it prior to my signing into Zoom? Still valid? Other suggestions?Thanks to the Community for any help/advice!
Hi, I am thinking of getting the Razer Ripsaw HD Game Capture Card and set up like this: Plug HDMI out from Laptop in to Razer Ripsaw HDMI input Plug my headphones into the Razer Ripsaw Plug the Razer Ripsaw HDMI output into my 1440p 144hz Monitor Plug the Razer Ripsaw USB into a PC dedicated to streaming My questions are - Will the Razer Ripsaw do 1440p 144hz Pass through ok? Will I hear gameplay and be able to talk on my mic plugged into the Razer Ripsaw? (Discord on the gaming pc) Or, do I leave headset plugged into laptop and use some software to mirror sounds between headset and the HDMI output? Note I don't use laptop screen at all it is always turned off. Reason I am looking into a device like the Razer Ripsaw is because at the moment I am streaming WoW off my laptop but it kills my FPS in game a bit. Want a solution where I offload streaming to my spare PC. Thanks in advance to any advice you can provide!
so i am having this issue with my streaming PC. its a Gigabyte Z77X-UD3H Rev 1.0 mother board with a i7-3770k CPU, and i have my Ripsaw HD, Kiyo, and Kraken TE headset controller plugged into the back of the PC in the USB 3.0 ports. however the issue it windows is telling me they preform faster when plugged into 3.0... but they ARE plugged into 3.0! so i am trying to find out what i need to do to fix this. everything is updated, drivers are good, no updates from windows. i tried all the USB 3.0 ports and its still telling me they preform better in 3.0 (again...THEY ARE PLUGGED INTO 3.0). this is driving me nuts! edit: i was able to solve the issue with everything by plugging in the cable that came with the Ripsaw HD.
I got problem with driver I got the newest driver of Razer Kiyo but in WIndows device manager I got Razer Kiyo but in programs like SLOBS Discord I have named it USB Video Device. To be clear in solution I made change in driver from Microsoft to Razer but it doesn't make it up. Also I remove device with driver. Restart computer plug in again and it doesn't work either. Is there a solution to make programs see camera as Razer Kiyo not USB Video Device?
So I bought the Ripsaw HD, My setup is, my main "Gaming PC" is my Razer Blade 15 and I have another PC for recording/streaming. So I output with HDMI from my RB15 to the Ripsaw and the Ripsaw connected to the other PC Everything shows fine on the other PC in the OBS software. My RB15's display is 144 hertz, but the moment I connect the Ripsaw, it automatically uses the 60 hertz screen because in the settings I need to "Duplicate these dispalys" I've tried to change the hertz in the NVIDIA control panel but it only shows max 60 hertz.. and when I'm trying to change it from the Window Settings its giving me an error "the display control panel is unable to change the display settings"
I just recently upgraded to the new Asus G14 from an Acer Swift 3. After messing around with a lot of settings I got it to work on the old laptop. but as soon as I switched to my new one I get no sound and no video. and occasionally it wont even show the capture card in streamlabs. For something that is suppose to be plug in play it definitely is more than a hassle. I've looked everywhere online to fix the problem as this is messing with my income as a content creator. If i cant find a fix soon or Razer fixes the problem I'll probably just end up buying a different capture card with less issues. also i am trying to capture from a xbox series x and my xbox one. neither one would show in streamlabs. so i believe its either a ripsaw issue as its not the first time I'm dealing with this. or its a streamlabs issue but i doubt that since other clients like obs have the same issue.
Hi.I wanted to ask you - do you have any proven settings for this microphone for streaming? The second question - how exactly should you talk to him?I have it hanging over my shoulder and I don't know if I should speak to the side, from above, or directly with the capsule in front of my mouth? What accessories should be used?Is it worth using pop filters and if so which ones (the one from Razer is a bit expensive).
Can someone post a screenshot of the Windows device manager similar to my picture here just to confirm that the Ripsaw indeed installs a USB 2.0 MTT Hub for some of the devices and only the the Ripsaw HD HDMI is USB 3.0. My issue is that i get a picture in OBS if i use USB 2.0 port but i get no picture using USB 3.0 port.
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.