General Discussion

I have been gaming for a long time, went to consoles and got tired of that and back to play with the big boys. That being said, I decided to build my own pc yet again and wanted to go with Razer for most of the components. The Tomahawk case doesn't say if it comes with a PSU or not , lists no electrical info so I called in to double check and to see what PSU they recommended. After 15 minutes asking the question if it came with a PSU the lady asks me if I want to know about fans. OMG, head is about to explode...so I wound up here looking for suggestions :) Anyhow...any suggestions on Power Supply for the ATX Tomahawk case? The Razer PSU isn't out yet, but not sure when that releases.

Anyone else getting a Razer updater at boot up that fails? I went to the website and reinstalled all Razer SW and it seems to have stopped. Thought it was strange. Have a good day!

Hello dear community, sadly while a very important event was going on when typing something I accidentally did the FN+Y shortcut on my Razer Huntsman Mini v2 and it turned off my PC. Now it actually caused PTSD now where I'm scared of typing so my PC doesn't turn off. I have many products from Razer and I even checked on my DevPC if the Huntsman TE also has that shortcut. I was really angry and now I'm scared and sad that I missed 1min before the event ended because my PC turned off.

Hi I've recently got an Razer Ripsaw Capture card, but I will admit that I have no prior experience with using capture cards or other recording/streaming equipment; but I've gotten the device set up properly in OBS so it is capturing Video and Audio from my PS4 (after a lot of bumbling around.) I was just writing here to see if anybody had some advice for any advance settings beyond what's said in the instructions. My computer is not the best in the world for recording, nor do I know much advanced info about computers that I probably should. I want to make shagle the captures look as nice as possible omegle , while not overheating my computer. any advice?

Hey all, As per the title. Can't find any news on this. Wen AMD Blade 17? Thanks.

For my part is Ganyu from genshin impact a.k.a the goat of the game :cool_:.

I tried to pre-order the Blade 17 Pro (i9/3080ti), but the blades are only available in Nordic layout after the pre-order countdown timer stopped? I'm from the Netherlands, which is part of the European Union.

Hello, How's everyone doing? Hope you're all staying safe! Been a LONG time since I've been particularly active, so I wouldn't be surprised if no one remembers me - I'm sure we also have many new people around here. I figured I'd share what happened and reintroduce myself. Fair warning in advance: it's a LONG one! In a nutshell (as much of one I can manage), back on March 3, 2018, my grandmother suddenly and unexpectedly passed away; prior to, she had an infection (cut her leg on the edge of her bed, which had a metal frame), went to hospital, and they claimed she would be fine, but, surprise - she ended up dead shortly thereafter, and warning signs were missed completely by supposed professionals! Anyway, as a result, I ended up helping to care for my veteran grandfather, who suffered from Alzheimer's disease, so he could stay in his home. It was extremely challenging and difficult; we had to fight just to get services and stuff he was eligible for as a veteran, and the first year w

Not sure if anyone else is experiencing this. When I first got my Viper 8khz wired, it was working fine, didnt need to install Synapse 3 because I already have the Blackshark. A day later, the mouse disconnects randomly and causes my game (DoTA2) to crash. I tried searching online and did every fix out there from fixing USB ports, power management and finally found a YouTube video of the mouse disconnecting when lifted off the mousepad. I returned the mouse thinking it was a hardware issue and got a replacement mouse. The replacement mouse worked just fine and didn't have that issue. This lasted for about 3 weeks when last night the mouse disconnected again. This time not only does it disconnect instantly when lifted off the mousepad, it does by itself after about 15 seconds when connected. Tried it on the PC and a laptop, same issue. Is there a software or hardware problem with this mouse? I find it extremely unlucky to have 2 of the same mouse having the same problems.

Is 8GB RAM enough for gaming?

I own a Razer mouse and headset and they're registered to my linked account, but I've only gotten the trophy/reward for my registered keyboard. Any help would be appreciated.

Hey there, so I was told by email via Razer to start a thread here about the Orbweaver. I would love to see an updated one. The current only runs on Synapse 2, and the padding for the hand is slowly starting to come off. A bunch of people will probably say the Tartarus V2 is almost an exact replica. I agree, but they replaced the 20th button with a scroll wheel. Which is cool, but personally I don’t want an extra scroll wheel, I utilize that button when gaming, all 20 of them. Could we please get a new version of the Orbweaver?

Hi I'm trying to connect my Razer Core V2 (AMD RX 580 8gb) to a HP Spectre x360. I can get it to mount and connect to the Thunderbolt software. However, about 5 seconds later everything on my laptop freezes like it's missing a driver. I tried installing AMD'S Adreneline software but it says that it can't find azar any AMD hardware echatspin . Any suggestions?

I'm trying to use the Razer Synapse configuration app to bind the 12 number buttons send extra F keys from the 13..24 range, but I'm not having any progress. When I'm in the right menu, I can press F1 through F12 on my keyboard (or onboard keyboard) as usual, and it registers and works fine. But because I don't have any real F13+ keys, I'm using AutoHotKey to send them virtually, and that doesn't work.OIf I try to send keys within F1..F12 range or any other common key, it works, so the AHK script is working, which means the Synapse software doesn't seem to want to accept F13..F24 keys. Just for reference, I'm using A:: Send {F10} autohotkey script code with different numbers, there's nothing complicated about it. Is there a way to bind the side buttons to F13-F24 keys? Maybe somehow without the Synapse app or by editing some of its config files and uploading the custom configuration into the mouse manually?

When I open roblox player, It sends me to the web, so I can't use booster prime nor boost. I know the problem, but I just can change it. the problem is I need to change the target for RobloxPlayerBeta.exe Instead of RobloxPlayerLauncher.exe. Another problem, I can't use booster prime with the microsoft store roblox, please help

ME gustaría cambiar mis almuadillas original a cuerro pero busco y no me sale nada. Hay otras almuadillas compatible con con los barracuda x. O me pueden en enviar un link

The right earbud will disonnect after around 15 seconds if there is no audio playing. This can be seen as the chroma light switches off on the right, but stays on the left earbud. Only the left earbud will play audio until manually turning on the right earbud or placing them both in the case and resetting. This issue only appeared after the latest firmware update on the Razer Audio application. Looking online this issue has been apparent for at least a year, yet there has not been a new update to fix this.

For many of us, celebrating the holidays comes with a lot of time spent with family, friends and more importantly, presents. Despite being an adult, I'm still lucky enough to receive presents from family members, usually the children take center stage and take up all the presents, but someone always manages to get me something. Although I have everything I need from this great brand we bleed green for, there's always something new that pops up on our list eventually. What's on your list? What shiny new Razer product do you hope to receive this holiday season? For the last Thread of the Week for 2021, let us know what you're hoping to get and as a bonus, if you post a photo of what you got in this thread, I'll be sure to reward you with a present of my own. - - - About Razer Silver: Razer Silver is the only loyalty rewards credits backed by Razer. Earn Silver when you Pay with Razer or engage in software and services from Razer and our Partners. For more information on Razer Silv

Hello, I bought Razer Core x and MSI Geforce RTX 3070 gpu to extend my gaming experience on my 2018 Razer Blade 15 advanced laptop. I installed the gpu to core x checked several times it fits properly. When i run the system the core x has power and its fan spinning. The gpu has the lights on and fans are spinning as well. However windows has not been detecting a thunderbolt device. I read lots of threads but couldn't find a solution. I have been told it could be a windows 11 issue then i downgrade my system to windows 10 with clean setup. Nothing changed still not detected neither my egpu nor core x on the device manager. I did update the thunderbolt drivers and the software and nothing listed on approved devices too. I spent a fortune for the setup and couldn't make it work for 3-4 days. Its very annoying to have an expensive machine sitting in front of me doesn't work. Can anyone has this issue please help me. Thanks in advance.

If this incredible chair will actually be made, if anyone from Razer is seeing this, please make it so you can plug usb and regular headphones into the chair so you get all of the features but the speakers aren't on and the audio just comes out from the headset/headphones

I picked up a Razer aRGB controller. I'm glad it has more customization than my Asrock polychrome sync mobo. It treated the mobo and everything plugged into it as 1 device. I'm seeing some limitation from the Razer controller too though. For instance, some games run chroma lighting across my kb, mouse, mousepad AND everything linked to the aRGB controller. Apex Legends does a phenomenal job with this. It's probably the best I've seen in terms of chroma-enabled gaming so far. Then there are games like Monster Hunter: Rise and Outbreak 2 that have chroma support but, don't activate the aRGB controller AT ALL. Anyone have any tips on configuring my aRGB controller. It functions fine in studio (no support for wheel or reactive but, I can live with that) but, I wanted to make sure I'm not missing anything on my end. Is this just a dev thing? I'm not understanding why they wouldn't include the aRGB controller in the programming. FYI- I'm running the latest version of synapse 3 and have upda

Hello, my avatar name is Goldenbeery. :) I am a grandmother living in AZ with her husband and two dogs. My husband and I like to play Final Fantasy XIV online together. "The Couple that plays together, stays together". I'd like to welcome you all of a NEW YEAR and hope you are able to make friends and have a great time playing. I am on the World A...with my husband at PEGUS Command. Come and look us up. We are a great group of decent people from all aspects of life who love to play!

Sorry for my english guys but this Synapse is making me crazy hahahaha How the images show, i alread add the headset but don't appear for me to receive for email my activation code, what I need to do? Thanks

Hi, I've read that you will push out an update for TE 2019 and Ultimate, which will enable us to use the controllers with PS5 games - is this true? If it is, what are the chances that we get this update in the near future? Thanks in advance.

Hello Razer Lover, Does anyone know where I can buy the Razer Naga Trinity "Mouse Case"? Because I have trouble carrying the other 2 side plates all the time I want to carry my mouse with a case so I can carry the other 2 side plates easily