Keyboards

To owners of Razer Keyboards: Have you ever encountered the frustrating problem of double typing, where keystrokes are registered twice instead of once, while using your Razer Keyboard?

There is a Razer Blackwidow V4 75%, which is not skeleton, has hot swappable switches and all this customisation preparations, but it doesn’t have a numpad. Will there be a full-size version of that keyboard? Current full-size Blackwidows V4 (V4 X / V4 / V4 Pro) are all skeletons and all without hot swap sitches and sound dampening foam. Will there be similar to this 75% version, but in full-size format this year?

I have the basic blackwidow v4 and some pop got spilt on it now when I click certain keys on it it acts as if I have pressed multiple I believe I have all the screws out but I only found two and it is extremely hard to try to get apart any help is appreciated 

I turn on my PC and all of a sudden the keyboard is not lighting up or receiving any input and doesn’t work. I’ve tried different USB-ports and no luck. I’ve also tested the USB-C cable that it uses to connect and it still works; can charge my phone and power other devices. Just wondering if there’s RMA/some kind of procedure or if I’m just left in the dust here having to buy a new keyboard. 

I hope this feature can get added as it would make razer keyboards that much more useful and customizable. I’d like to start off by saying I love the customization already in the huntsman v3 pro especially with snap-tap, actuation, and hypershift. However, it is important to note that there is so much room for more customization and it is seriously limiting. A good first step in the right direction would be allowing a single key to perform multiple actions depending on how far down the key is pressed (Giving it two actuation points). For example, I have my grave key ` as my hypershift key, and I programmed my vowel keys to come out as long vowel symbols when hypershift is pressed “ā, ē, ī, ō, ū” (for typing latin words). But I would still like to use the grave key for it’s intended purpose, which is where the two different actuation points come in. If my first actuation point is set at 1.2mm then my hypershift mode will be enabled, and if my second actuation is set at 3mm and I press t

My Water fell on my keyboard and i instantly clean it , after some time I turn on my keyboard and some of keycaps didnt show RGB color , I also did update on Razer software and IT didnt help

How is it that Synapse 3.0 doesn’t have support for MacOS? Can we get a version of synapse 3.0 for Mac. 2.0 is only supported by old versions of MacOS and the third party app on GitHub doesn’t work too well. Why isn’t this built already? Why are you alienating half of your user base?

Hello, I have the following problem. My keyboard has always worked without any problems. However, last month the keys "Q,W,E,R,T,Z,U,I,O,P,Ü" stopped working. You press them and they light up, but no input is made. The other keys work without any problems. The last time I was away from the computer for a while out of frustration, and suddenly the keys started working again. Now the same problem has occurred again. I have googled and tried everything possible.

I’ve been through two blackwidows that have had the lights stop functioning (and multiple keys stop functioning on each), so I’m wary about getting another razer keyboard, but the snap tap thing sounds intriguing…Is it worth the risk and the money? Has anyone here used it yet?PS: Why do people keep saying it’s banned?

Dear Forum. Can the macros only be exported one at a time? Or is there a way to batch export? Thank you.

Dear Forum.I am configuring my Tartarus Pro 2 for productivity (keyboard shortcuts/macros for various programs – primarily Revit).After considering various configuration options, what I’ve decided would work best for me is to create a bunch of profiles (some programs to have multiple profiles depending on the phase of work, etc.).To switch between the profiles I want to be able to press the Hypershift key (on any of the main profiles) and have customized the keys in Hypershift mode so that I can select which profile I want to switch to.The benefits of this arrangement (in my mind) is that (a) switching between profiles rather than keymap means that I get a notification on my desktop to indicate which profile I’ve switched to, it allows for swapping between 19 profiles (just using my fingers, not thumb buttons)…While it seems to be working well, the only issue that I’m having with this configuration is that it seems that I have to individually configure the Hypershift configuration for

I want to know the release date of the V4 Pro in white, with orange or yellow switches. I want to buy it, but it’s only available with green switches. Is it possible to replace the switches? I heard that the switches can’t be replaced on the black version. If the white version allows switch replacement, I plan to purchase it separately.

Hello, I wonder if the anti ghosting problem in Razer Ornata v3x is also available in Ornata V3 TKL. I will order the product, but it is not written anywhere.   

The RGB lighting on the keyboard is not very fluid. I assume this is consistent across all the devices, but my reference is the Ornata Chroma v1. It is not lagging or anything.The rate at which the lighting updates seems… slow. When you use effects like Ripple, especially on faster speeds you can really tell how choppy it is. Feels like the lighting is updating at around 15-30 fps. There is also a delay from the moment you press a button to the effect beginning. It makes the effects feel very janky and unsatisfying.Is there a hidden config option somewhere where the update rate can be changed, or is this a hardware limitation? For reference, here is what a fluid wave ripple effect should look like:https://youtu.be/5lq7r85gtm0?si=exG15piadxtXZg54&t=261Here’s a demo on my Ornata Chroma I recorded at 60fps (Ripple, Speed: 30, Width: 300%) :https://streamable.com/2ayl8zIf you go frame by frame you can see that the lighting updates rather sporadically. Slight changes in lighting appear

I recently found out about this keyboard from Razers Discord. It looks to be only in China but I was just wondering if we could be seeing this board be released to the rest of the world in 2025?

I have a quick question about my Huntsman V2, are the Switches able to be hotswaped? because i've been looking into getting some of the Linear Optical Switches instead of the Clicky Optical Switches it came with. any info would be great, Thanks!

Just posting to share my experience with the Blackwidow v4 pro. Purchased around 9 months ago, about a month ago I started to notice occasional double spaces where I only intended to put one. I brushed this off as a typing or software issue on my end and ignored it until it started to happen every 3-4 presses of the space bar. I followed the online guide and tried reinstalling and updating my firmware and synapse software, which made the problem significantly worse. Now it only registers a space bar press about half the time and the times when it does register them, they’re often double presses. It also started to happen with other keys. I’m working through the support process in hopes of receiving a replacement (which, based on what I’ve seen, will likely develop the same problem again another few months on). Just posting this to add to the chorus of people experiencing this issue in the hopes that Razer will eventually address what is clearly a hardware issue and not one of user erro

Been wanting to get the Razer BlackWidow V4 with the yellow switches but there are no options for one with the yellow switches, any idea when that will be avalible?

Hello :) I have a little Question today i buyed a V4 75% and dind´t  look at the layout xD My current Keyboard has German Layout how Z and Y is changed but the V4 has US Layout Can i change the keycaps from Z and Y and thats it to get my German layout? in Windows i have German Typing and Keyboard so here is no Problem  

Can i save my keyboard profiles on a PC with Synapse and use them on another PC without Synapse? Because i can‘t download Synapse on the PC at work. 

Dear Razer Support Team,I hope this message finds you well. I am writing to inquire about the Razer BlackWidow V3 Mini as I am experiencing some issues with a few of the switches that have stopped working properly. I am considering replacing these switches and, at the same time, exploring the possibility of converting the keyboard to a hotswap system for easier future replacements.In order to proceed with these modifications, I would need to know the dimensions and technical specifications of the PCB to determine whether it is feasible to install hotswap sockets. I would greatly appreciate it if you could provide me with this information or guide me on how to proceed with these modifications.Thank you in advance for your assistance, and I look forward to your response.

While using my Blackwidow V3 Mini Hyperspeed, the whole QWERTY row went bananas. For example, if I type “q”, it reflects “aq1\”, if I type “w”, it reflects “swz2”, if “Tab” is pressed, it reflects as if “Esc” + “Tab” + “Caps” are being pressed, and so on with that whole row. The rest of the keys are working as intended. No spills on keyboard, updated to last firmware, I even tried the “out of demo mode”, factory reset and unistalling driver with Device Manager, and still getting the same issue. PLEASE HELP ASAP!

My Razer huntsman mini analog switches is double typing.

When will snap tap be introduced to the v2 analog?

finally got my huntsman mini,its a life changer happy with it:)