Mice and Surfaces

Hello guys , i need your help i am currently based in saudia arab (middle east), i bought razer lancehead wireless from jarir store, unfortunately after buying it i had to travel pakistan for my mother liver transplant i stayed there for a year when i came back i tried to use my mouse but after unpacking the box i couldn't found any cable(wire) . my mouse is completely useless without cable. i cannot claim the warranty i checked razer care store but its only for inside US customers . could you guys please help me or guide me where should i get the original or good quality cable. thankyou so much in advance

just a quicky but the latest synapse 3 update has seriously dimmed my led on the mat. Has anyone else noticed this. i reverted back to an older version and they are bright so it must be the update. also i have the brightness on 100%

On razer da, there is some sort of sticker at bottom of mouse. No... i don't talk about that, which come with the mouse when it's new. There is another sticker, which peels of after while and cause friction and if you peel that of, there is some sort of glue and it doesn't go off... This reduces lifetime greatly ! Why it can't have normal surface like other mice ???

A couple of days ago my death Adder Elite starting acting very erratic, i.e., the cursor was jumping all over the screen. I have an older back up Elite and plugged it in: same problem. I tried all the USB ports front and rear: same problem. Mice worked flawlessly on Windows 7 before I upgraded to 10. The only way I could fix both mice was to uninstall the Razer software and go into the M/S mouse settings in the control panel. I had to move the slider more towards slow and also uncheck "enhanced pointer precision". Has anyone else had this happen with the Elite (or any other Razer mouse) in Windows 10? The MB is an Asus P8P67 Pro and is about 8 years old so it might be possible it is starting to act up. I've run all the usual thorough checks on the OS (SFC, DISM, Chkdsk, A/V and Malware scans, etc.) with no problems found. Any suggestions I might not have thought of? Maybe a software conflict?

why can you only use wave effect on a 90° angle with the firefly v2? Everytime i change the angle the rgb doesnt flow?

The charging dock for my Basilisk Ultimate does not show in Chroma Studio. Only the keyboard and mouse show. How can I get the dock to show in Chroma Studio?

Have you used a regular USB wall charger to charge your Mamba the same chargers we all use to charge our phones and blue tooth speakers and portable batteries, etc. Does that work. Does it charge properly. Got 2 different answers from 2 different Razer reps so i figured I could get some help here from someone who o has had the mouse for a while. One rep said using a wall charger is fine the other said that could overcharge the battery causing a problem. I'm thinking once the Mamba reaches 100% it will simply stop charging like my phone and blue tooth speakers. Thanks

My pc can't boot if my Deathadder Elite is connected on a usb port it's absurd. Please help me. My BIOS is updated but the problem remains

I was wondering if there was anywhere to purchase the USB cable to charge my Basilisk Ultimate Wireless. I love the mouse but unfortunately sometimes it won't last my gaming session so I have to stop and charge it, which is not an option. The included USB is a proprietary shape and I can't plug in the charging dock and the mouse at the same time unless I hack apart another USB cable.

The right side of the scroll wheel seems to be brighter, the difference can only be seen with some colours tho.

pls halp i cant do it

How do I know if the Mamba wireless mouse is charging without turning on my computer. Does it light up when charging then turn off when fully charged? Do I have to use a computer or laptop usb port to charge the Mamba or can I use the same wall charger I use for my phones and portable batteries? Thanks

Wanna find a new mouse. What's the best mouse right now? My previous mouse is Deathadder Chroma. Decent mouse but wanna try a new mouse. Any suggestions?

Soo yeah I am buying a razer laptop for gaming and work(papers, projects, editing, school, ect.), I am always on the fly and I can't use a desktop computer. But the silly question is that I dont know what mouse to get, I have watched alot of reviews but still can't decide. I have no budget on the mouse, and I'm on the half of the Viper Ultimate and the Basilisk Ultimate. I'm a palm grip user with no limits to gaming as I like mostly all FPS games. What would you choose? My faith is in the Razer community, thank you. ~ERG

Does anyone know if the firefly or the hyperflux hard surface is the same as the vespula v2? Ive owned them all and they seem very similar but Synapse does not have support for the vespula v2. It seems its only supported for the old one. I could be wrong. Any thoughts? I'm trying to calibate my lancehead properly as its jumping all around this hard surface.

and now i am searching for a seller that still has is because razer itself isn't selling it anymore. :frown_: The Deathadder also isn't realy a good alternative for me because it has only 2 side buttons. So does anyone know a good seller or maybe an alternative left handed mouse with more that just 2 extra buttons?

I can't install new firmware on my Razer Lancehead mice. Help me solve this problem. https://support.razer.com/articles/1582773371

The old I get the more I wish Razer would make a Vertical Naga mouse. I would buy 6 of them just to make sure I could get 30+ years out of them just to make sure I had one for the future.

Ive bound my mouse 4 to press keyboard key 9 with no problem. i was wondering if i could also bind Shift+mouse4 to press 8 on my keyboard and have both bindings at the same time. Thanks.

TLDR; title, hopefully I conveyed it well enough. I have a Razer Naga Trinity, model no. RZ01-0241, and I've been having an issue for a good while, probably since I started using these settings (to follow). I play an MMO with targeting skills - one press to bring up a reticle and a second to fire it - so I use the turbo settings for the numbers (12-button plate) and wheel tilt to save my fingers a great deal of fatigue. And this works beautifully like 70% of the time, but occasionally, the button keeps firing after I let go. This leads to firing off wrong skills at wrong times in PvP situations, and totally screwing up mechanics in PvE, often to the detriment of the group I'm running in. Then I gotta fire it again to get it to reset, and hope it doesn't happen again. I've already ruled out that it could be the game, because it's happened in at least 3 so far (Guild Wars 2, Grim Dawn, Starbound). And I believe I can also rule out that it's a mechanical issue, because I've never notic

I had both mouse and keyboard working fine with Synapse v2. I bought Nanno Chroma speakers and when I plugged them in they automatically installed Synapse v3 (exact version: 3.4.1) V3 doesn't recognize my old keyboard & mouse. What I tried: 1. I uninstalled all Razer software & all device drivers 2. booted the computer 3. reinstalled Synapse v3 Result: - only the speakers are recognized. - the mouse and keyboard are working, but there no way to customize them via Synapse. Please advise

So i read about that there gonna be released firmware soon for dpi correction, any ETA on it?

Is there a way to use the battery level lighting effect while using the advanced effects with chroma studio. It seems like you can only use the quick effect battery level and use basic effects on the rest of your devices or use chroma studio and not be able to use the battery level on the dock.

Before using Viper Ultimate my USB ports powered off when I put my laptop into sleep mode. It was very convenient for me since I've got a lamp connected to one of them. Now, when the Razer dongle is connected, the lamp stays turned on in the sleep mode. When I disconnect the dongle everything goes back to my preferable state. Can there something be done about it?

So Im loving my new viper ultimate but I have an issue with using the usb adaptor with the charging dock via my TB3 dock. Basically if I use the usb adaptor in the dock, everytime I boot up my laptop (Razer Blade 15 2018) the mouse and dock lights up but the windows cursor will not be present. Ill have to unplug the usb adaptor from the dock and reconnect it and turn off the mouse with the bottom switch and on again before the mouse will work. I have gotten around this by plugging the usb adaptor into another port on my TB3 dock and it works perfectly, able to use the mouse as it should be on boot up. Then I have the dock just for charging the mouse when I need to. However this is taking up 2 usb ports instead and while it works it just annoys me that I cannot use the usb adaptor plugged into the dock the way it was meant to be. I have already updated the firmware on the mouse and dock as well as my TB3 dock to make sure all drivers are the latest but the issue remains