Mice and Surfaces

Hello, i already created one, and set 1 ms sleep. It should send 500 key pressing per second, but its more likely 50.... Can i get any help?

Are Left Handed Mouse Still in production? Deathadder and Naga Left handed version to be specific.

Would be fine to find help here concerning question above...

I read that the Razer basilisk mercury white is stil in production however i am unable to find it on the Razer store, specifically the SG site. It this just due to mercury white not being available here/Razer doesn’t carry the basilisk line with mercury white anymore?

Hey all, I just brought a new Naga Pro and I am having an issue with the 12 button illumination. The 12 buttons work perfectly but they are not lighting up. Am I missing something? I have cleaned the contacts, updated the firmware and tried manually setting different colours and effects via Chroma with no luck. Chroma recognsies it as a lighting zone but no colour is coming out. Thanks!

Hi, there. Recently I purchased 2 Fireflies surface. But Synapse did not recognize second one. And found same question 2 years back. /how-to-sync-2-mouse-mat-goliathus-chroma-extended.59629/ Still the same ? Thanks.

it's been now more than a week with my mouse stopping every about 10/20 sec or even less i tried anything from changing usb on the pc to unistalling multiple times the mouse software but nothing changes. Is there anyone with the same problem/who knows how to solve it?

So a couple days ago I logged onto my PC and noticed my 1-12 side button hotkeys were no longer working. When I open Synapse and go to the hotkey section it still says they are all what they should be but instead they are just acting like my standard 1-12 on my keyboard. No matter what button I change them too they just stay acting as standard 1-12 and it’s made playing games like WoW for me now basically impossible. I plugged in my razer naga x and the same issue is happening. I think this started with the last synapse update. Anyone have any idea?

Hey there, recently I bought a Razer Viper 8k but the first time when I plugged it into the computer - a desktop pc, MSI MAG B550 Tomahawk motherboard - nothing happend, no Windows Sound, no Mice Symbol on Screen nor RGB Lightning at the Mice itself. So I took the Mice, turned it arround and pressed on the DPI Button and suddenly the Mice turned on and Windows gave me the USB Plugin Sound. I quickly tried to update the Firmware which I've downloaded from the Razer Homepage and after I've done so, I've switched immedietly to Synapse and everything seemed fine to work. But after a PC restart, the same problem again. After I configurated the USB Device Energyrules, I also recognised that the Viper 8k is shown as "HID-Complient Mice". That was quiet curiouse to me, cause I was used to see my old mice - razer basilisik - by it's product name and not as a HID-Complient Mice, but anyway, nothing really helped out so far. The Mice is working for a uncertain time before it starts to drop off th

Hi. I wanted to ask you - when do you load your mice and how often. It used to be said that the battery should be discharged almost to zero and then charged and preferably not fully charged. Later, something changed and it was claimed that it was best to recharge the batteries more often, as long as not to discharge them. How is it with you? Are you waiting for the battery to die and then connecting to the power supply or maybe connecting the mouse after finishing the game / work?

Started today, cleaned the sensor, uninstalled, reinstalled synapse. uninstalled drivers, rebooted computer. Nothings working, y axis moves perfect, if I jerk the mouse around the mouse pad real fast i can get it to move from the top of the screen to the bottom or vice versa. nothings rattling on the inside. it stated with a random slight jerk up on the cursor. but after I started fiddling with it to correct the issue I am now at the point I am now where X axis is next to useless.

Spring sound coming from dpi keys https://vocaroo.com/1jYCO10kLNUg

I have viper8 k and win11 on friday after 11 month when i use browser the chrome light turn off and the sensor. After that the mice dont get connect only doi stage is blinking some times. Usb on pc works. Inuse now a 10 years old mice whitout problem. Tomorrow i will test it on win10 . Is the mice now death? So i can buy a new one or try it to change on warranty. But mice for 100 € works 11 months. I use only for office work.

I've recently got a Pro Click Mini. It is connected to my PC using the 2.4GHz dongle. Intermittently my cursor will fly to the left or top most end of the screen. Occurrence roughly once to twice an hour. Swapped out the batteries for a verified fully charged ones as well as a new set of one use AAs with the same issue. Have yet to verify if this happens on Bluetooth as I do not currently have access to a bluetooth dongle for testing tutuapp. Not entirely sure if it may be due to RF interference in my room or signal strength. 2.4GHz dongle is connected to the back of my monitor. So the monitor itself is the only thing blocking line of sight. Is this normal? Should I be sending this for servicing?

So in order to work properly, the huntsman v2 analog registers an xbox 360 controller device on the system. The issue is that older games all default to that device regardless of my windows settings. This obviously disables my actual controller for those older games. Is there a driver or something I can install or tweak to stop the keyboard from doing this? I really dont want to have to leave this feature disabled.

Hi, Is there a way to switch between wire and wireless connections without unplugging the cable? E.g. I have two PCs running at the same time, one of them has the mouse cable plugged in and the other one has the USB dongle plugged in. I'd like to switch the mouse control over the PCs. Is there a way to achieve this without having to plug/unplug the cable from the mouse?

I recently got a basilisk x hyperspeed, worked great for like a month or so, then it kept randomly turning off (I assume) which meant that I had to reinsert batteries. However, a week or so ago, it just broke and now I can't get a response out of it, putting in new batteries doesn't do anything, and the dpi button won't even light up anymore.

I'm happy with this mouse, but I don't like the Sleep Mode. I don't play PC games and I don't use the mouse for a long time because I enjoy watching videos or playing console games for a long time. So I have to wake the sleeping mouse frequently. But this mouse takes too long to wake up. I plan on using rechargeable batteries so I don't need Sleep Mode. It's also okay if the battery's lifespan quickly decreases. Can't I disable Sleep Mode on this mouse?

Meet the new Razer Viper V2 Pro - a 58g wireless powerhouse that’s lighter than all its predecessors. With all-round technology upgrades such as our Razer Focus Pro 30K Optical Sensor and Optical Mouse Switches Gen-3, the ultimate esports advantage is now in your hands. Available in black and white: https://rzr.to/viper-v2-pro

Hello, I registered Razer Basilisk Hyperspeed mouse and didn't get Accuracy Up trophy.

That mouse is a shame I guess Forgot to mention that the scroll click was broken doing double clicks and not regging since day 50 after purchase. that mice's build quality is worse than THE VIPER ULTIMATE's quality

Hello. My Pro click just died!!! RZ01-0299 No lights not charging nothing! As I'm reading there is a lot of same problems and even after 3 months of use. FIX: Ok this was just strange. I turned off the mice and plug it in adapter to charge. Then I started to put the cable in charger and out and while doing this I turned the mouse ON. And it started to work!!! So If this is the solution for "DEAD MICE" I hope someone can bring the mice from the dead...

When you break down the stats of the four current NAGA choices, the Left-Handed would be my choice... except, it is left-handed. Please make the Left-Handed NAGA in a Right-Handed version. Until then, I am settling for the Trinity NAGA (okay NAGA). I'd move to the NAGA X, but I don't want to give up 3 programmable buttons. The whole point of the NAGA is more buttons. Why did you remove 3 from NAGA X anyway? Left-Handed NAGA for Right-Handed people please, with the braided cable. :) Ref: https://www.razer.com/pc/gaming-mice/naga-family Scroll to the bottom half of the webpage to see the comparisons.

I purchased the Viper 8KHz looking for a fast, precise mouse for gaming and 3D CAD, and to suit a fingertip grip. And it has exceeded all my expectations - it's a joy to use and I find the ergonomics just perfect. Unfortunately there seems to be one fatal flaw - the scroll click only registers when I press very hard. I use the scroll click to pan around 3D models so this issue makes the mouse nearly unusable. I've tried the suggestions of trying to clean any dust that may have gotten in with compressed air, but it hasn't worked. It was like this out of the box. Wondering if anyone else has had a similar experienced?

What is the best mouse