Mice and Surfaces

I have viper8 k and win11 on friday after 11 month when i use browser the chrome light turn off and the sensor. After that the mice dont get connect only doi stage is blinking some times. Usb on pc works. Inuse now a 10 years old mice whitout problem. Tomorrow i will test it on win10 . Is the mice now death? So i can buy a new one or try it to change on warranty. But mice for 100 € works 11 months. I use only for office work.

I've recently got a Pro Click Mini. It is connected to my PC using the 2.4GHz dongle. Intermittently my cursor will fly to the left or top most end of the screen. Occurrence roughly once to twice an hour. Swapped out the batteries for a verified fully charged ones as well as a new set of one use AAs with the same issue. Have yet to verify if this happens on Bluetooth as I do not currently have access to a bluetooth dongle for testing tutuapp. Not entirely sure if it may be due to RF interference in my room or signal strength. 2.4GHz dongle is connected to the back of my monitor. So the monitor itself is the only thing blocking line of sight. Is this normal? Should I be sending this for servicing?

So in order to work properly, the huntsman v2 analog registers an xbox 360 controller device on the system. The issue is that older games all default to that device regardless of my windows settings. This obviously disables my actual controller for those older games. Is there a driver or something I can install or tweak to stop the keyboard from doing this? I really dont want to have to leave this feature disabled.

Hi, Is there a way to switch between wire and wireless connections without unplugging the cable? E.g. I have two PCs running at the same time, one of them has the mouse cable plugged in and the other one has the USB dongle plugged in. I'd like to switch the mouse control over the PCs. Is there a way to achieve this without having to plug/unplug the cable from the mouse?

I recently got a basilisk x hyperspeed, worked great for like a month or so, then it kept randomly turning off (I assume) which meant that I had to reinsert batteries. However, a week or so ago, it just broke and now I can't get a response out of it, putting in new batteries doesn't do anything, and the dpi button won't even light up anymore.

I'm happy with this mouse, but I don't like the Sleep Mode. I don't play PC games and I don't use the mouse for a long time because I enjoy watching videos or playing console games for a long time. So I have to wake the sleeping mouse frequently. But this mouse takes too long to wake up. I plan on using rechargeable batteries so I don't need Sleep Mode. It's also okay if the battery's lifespan quickly decreases. Can't I disable Sleep Mode on this mouse?

Meet the new Razer Viper V2 Pro - a 58g wireless powerhouse that’s lighter than all its predecessors. With all-round technology upgrades such as our Razer Focus Pro 30K Optical Sensor and Optical Mouse Switches Gen-3, the ultimate esports advantage is now in your hands. Available in black and white: https://rzr.to/viper-v2-pro

Hello, I registered Razer Basilisk Hyperspeed mouse and didn't get Accuracy Up trophy.

That mouse is a shame I guess Forgot to mention that the scroll click was broken doing double clicks and not regging since day 50 after purchase. that mice's build quality is worse than THE VIPER ULTIMATE's quality

Hello. My Pro click just died!!! RZ01-0299 No lights not charging nothing! As I'm reading there is a lot of same problems and even after 3 months of use. FIX: Ok this was just strange. I turned off the mice and plug it in adapter to charge. Then I started to put the cable in charger and out and while doing this I turned the mouse ON. And it started to work!!! So If this is the solution for "DEAD MICE" I hope someone can bring the mice from the dead...

When you break down the stats of the four current NAGA choices, the Left-Handed would be my choice... except, it is left-handed. Please make the Left-Handed NAGA in a Right-Handed version. Until then, I am settling for the Trinity NAGA (okay NAGA). I'd move to the NAGA X, but I don't want to give up 3 programmable buttons. The whole point of the NAGA is more buttons. Why did you remove 3 from NAGA X anyway? Left-Handed NAGA for Right-Handed people please, with the braided cable. :) Ref: https://www.razer.com/pc/gaming-mice/naga-family Scroll to the bottom half of the webpage to see the comparisons.

I purchased the Viper 8KHz looking for a fast, precise mouse for gaming and 3D CAD, and to suit a fingertip grip. And it has exceeded all my expectations - it's a joy to use and I find the ergonomics just perfect. Unfortunately there seems to be one fatal flaw - the scroll click only registers when I press very hard. I use the scroll click to pan around 3D models so this issue makes the mouse nearly unusable. I've tried the suggestions of trying to clean any dust that may have gotten in with compressed air, but it hasn't worked. It was like this out of the box. Wondering if anyone else has had a similar experienced?

What is the best mouse

Hello! Today, in the morning I was using my pc for about half an hour, mouse was working perfectly as it should. After a few hours I got back, ready to play some games but randomly and for no reason my mouse is not working anymore. Before I booted my pc I did a quick mouse clean, with just a cloth. Then the mouse LED went on for no reason, I booted my pc and mouse is not working anymore. It's not getting recongized by my pc or synapse 2. I tried uninstalling all the mouse drivers/usb drivers, completely uninstalled razer drivers (I also happen to have blackwidow v2 keyboard), disassembled my mouse to check if anything is faulty but still nothing. It also doesn't work on other computers that I have in the household. How is this even possible? I've used this mouse for years, 0 problems. I refuse to believe it suddenly just fell apart and won't work. I would really appreciate it if anyone could provide a solution or suggest something. Thanks in advance! EDIT: Bought a new mouse. Technolo

I was given a Razer Sphex V3 recently, and it's my first plastic adhesive mouse pad. I've not used adhesive pads before. I like how it's firmly affixed, but my question is, what do I do when I decide to move it? (because I decide to sit differently or just change desks) It seems like the adhesive properties will be quickly lost and the bottom will gather dust and particles very quickly if I take it off, similarly to protective glass for smartphones. I'd like to hear about the others' experiences with these things.

hi, recently I've tried to mod a razer DeathAdder essential. The problem is that I can't figure out which wire in it is used for what purpose. it would be great if someone helps me out with this

Does the basilisk ultimate work on chromebook?

I just updated my Razer Synapse software and my Deathadder Essential is only allowing a max of 1000 dpi. i play on 2400 dpi normally so my everything is messed up when i try and game. please help asap. I've tried sending in a support but it just gives back error messages

Hello, I purchased the Razer Orochi v2 and installed Synapse on Win 11. With my old Roccat Kone I could press the "Mouse Button 4" and then scrolling the wheel would scroll the volume slider. In Synapse I can't see this option and I dont want to waste 2 mouse buttons for volume up or down. Is there a way to use the wheel to do that? Thank you!

HELP!!! The usb receiver (used for wireless range extension) on my charging dock for the Razer Viper Ultimate doesn't work. It's not registering the USB when it's plugged into it at all. Is there a way to fix this or is the charging dock just faulty?

So i have the Viper for about a month now and this very strange problem. Windows fails to recognise the Viper 8Khz when i lift it up. What happens is this: as soon as i lift the mouse, windows disconnects and reconnects the mouse several times in a row until a windows error message comes, saying that windows failed to recognize the usb device. I have tried uninstalling and reinstalling both the mouse drivers AND synapse 3 a dozen times now. I have a Windows 10 64 bit system. Any help is greatly appreciated. Thx.

Hi Hey all, Im looking to buy an MMO mouse. I came across the Razer Naga Pro and the design + swappable panels seem to fit what I want. However, I am aware that razer has had a lot of quality issues with their gaming mice. I haven't owned a razer mouse before, so Id like to know after months (or years, I'm not sure when it was released) of use, have owners of the Naga Pro had any issues? I read are that there are double clicking issues, mouse being irresponsive, software is buggy/ not supported etc. I'm not looking for affirmation or anything, I'm just looking for an honest review. I will greatly appreciate everyone's help on this since its quite an expensive mouse, especially in my currency. Thanks in advance!

I have a Razer Basilisk X Hyperspeed and have been using the special DPI button on the mouse to switch between precision aiming and normal mouse DPI, but I've found it's positioned terribly and I often move the mouse around when I try to click it. Is it possible to configure a keyboard shortcut to replace it's function? As in, to switch between DPI profiles from the keyboard instead? I don't have a Razor keyboard, however.

Hello lately my mouse stops working while its lights are still up.Also when i charge it,synapse does not recognise that i charge my mouse

Razer issued a firmware update for the Viper V2 Pro mouse on June 15th 2022 that just came out on May 10th 2022 which contains a couple important fixes that are related to the power and battery. Main Fixes in Firmware Version 1.01.01: Fixed power consumption issue Battery life improvement Download the firmware updater @: https://rzr.to/YBzK3d Instructions if you need them are @ (even tho they are pretty straight forward mostly): https://mysupport.razer.com/app/answers/detail/a_id/6089 ⚠️IMPORTANT NOTE: DISABLE ANY 3RD PARTY ANTIVIRUS PROGRAM YOU ARE USING OR THE VIPER V2 PRO FIRMWARE UPDATER WILL NOT WORK!⚠️ I tried to use the firmware updater with a 3rd Party AntiVirus program enabled/running and it just throws errors when trying to launch the firmware updater, which Razer fails to mention this on the instructions page :mad_: