Mice and Surfaces

Does anyone know of a way I can get the side switches for a Razer Viper 8K? One of mine just died on me so I tried to replace it with an Omron switch that I used a while back on a Logitech G203, only to realize that it wouldn't quite fit back into the mouse once installed. I just ordered some Kailh GM 2.0's in hopes that the slots are large enough but would like to maintain consistency if possible.

I created this thread to find out how to properly maintain my rubber grip on my razer viper ultimate as my previous razer viper rubber grip has my thumb print indented into it. Will cleaning it with alcohol wipes maintain the condition of the rubber grip ?

I'm looking for a high quality but a simple gaming mouse with a low extra button count (2 extra buttons specifically). I've been eyeing on the Deathadder for a while now and it seems like a good pick for me, as it is high quality, light and simple (or so the reviewers have said). Even one of my favorite youtubers stated in one his videos that it's his favorite mouse. But I've heard critique from people on forums on Razer products, that they're not that durable, and now I'm sort of skeptical about buying the Deathadder https://showbox.tools/. Are Razer mice truly bad quality products? Should I just go for the Deathadder or something else?

I can see other people have posted this, but I had the old death adder chroma, and given it has right mouse button problems I instantly bought a Death Adder v2 because I thought it would be identical with optical mouse buttons. How wrong I was. The mouse is really bad in the hand, and where I could relax my hand on my old elite, I am forced to do some claw grip on the newer one because it feels more narrow than my previous elite with rubber on the sides. I know its not something I just imagine, because I got a second to my Xbox, and its just like that as well. My thumb cant really rest on this mouse, and besides the optical keys its really a downgrade. I get straight up cramb in my hand because the mouse is smaller. Its probably longer than the old one, but definetely more narrow. Add to that, the side mouse buttons are way outside the mouse than the other one, so had to push them in a little. I see this mouse is 2 years old or so. I am thinking of returning them even I got the

I lost the cable that came with the mouse and it's lost it's charge so it's dead. I can't find a replacement online, anyone have any idea how i can get a replacement. the deep hole that the usb port is located is preventing me from using another cable that i have from reading the port. help!

So i got a razer viper mini and im loving it. I've already set my lighting effects on my pc but sometimes i use the mouse on my xbox but the lighting effect doesnt save. is there any way to save it on the mouse permenantly?

After doing research on a new mouse, it looked like I would go with the Basilisk Ultimate. Great specs, love the optical switches, good RGB placement. Then I read the info on the web page and then checked this forum and was SHOCKED to find out that you cannot save RGB profiles to the mouse. Other brands I looked at such as Corsair, Asus all allowed their top end mice to save colors to mouse, and they are less expensive than this mouse. If anyone from Razer corporation ever reads these forums, how do you justify almost 200 dollars(170.00) for a mouse that CANNOT save color profiles to the mouse. Please consider incorporating into the next version. For now, this mouse does not justify the price.

The Razer Basilisk V3 is probably one of the best Razer mice out there. And especially its awesome Razer Chroma RGB, but you know another thing I love about Razer? I love the Razer Mercury collections. To me I can just imagine a Razer Basilisk V3 Mercury in it's sleek white and silver color scheme. I think this can definitely work. What do you say Razer? A Razer Basilisk V3 Mercury Edition?

Hi, I own Viper Ultimate and goliathus extended chroma mats for about a year but still have the similar problem. When I try to connect both of them to a type C hub that has a power plug and support power delivery up to 100w, either the mouse is randomly disconnect with the charging dock or the mouse mat disconnect. I already put up a 65w charger and still won't do good, but when I plug it directly to laptop, no problem occurred. Why I just don't plug it all to laptop? The reason why I use laptop because of the portability and when I need to bring it, I need to unplug it one by one, but If I use the hub, it become hassles. Btw, my laptop have a type c plug but just an ordinary type c, no thunderbolt support or PD support. What should I do for this problem gone? Thank you :)

Heya, I just bought my Razer Naga Pro like couple days ago and I do have some questions about battery life. Im using it at Maximum polling rate (1000) and Maximum brightness however my mouse at 100% battery life takes about 6-7 hours to get to 30% of battery life. Im using only 2.4 connection and ofc im turning it off for the night. Is it completly normal? Because I've heard about some up to 150hours battery life and im thinking about that its just my mouse broken or something.

i cant get my basilisk ultimate to charge with the cable only with the dock , super inconvenient

It was great to buy and use Razer Basilisk V3! I like it's DPI and grip. It fits to me for sure. Also, I can change the scroll mode. I will recommend it to others everyone who wanna experience comfortable grip and lots of functions. Also, I recommend to use Razer Synapse for more functions.

annoyed DD214 holder who owns two nagas, a 2010 model i purchased on post in VA, and then a naga chroma i purchased in 2016 in Germany (AE). i also poses a Black widow chroma, V2 i believe? now, i have been abusing these components for years, loved every second of it, until they stopped. my 2010 blue naga, some buttons stopped working, no issues. was heavy into gaming and i abused it. no issues with seeking a replacement. the new mouse and keyboard have been, nice. then the mouse started ghosting and freezing. then my keyboard started not responding to key strokes, or ghost the depression of the key stroke and then hold that key until i would rip the cable out of my rig. been hunting for driver support and assistance of that nature. Razer is pretty much as useless as apple. i have been attempting to contact them through more private means, but here i am on a community forum. i cannot find drivers for either component that i have had issues with. i cannot find "supported" drivers for my

When building my PC I made sure to purchase you Razer Basilisk Hyperspeed which was the newest on the market at the time. And all I can say is the product is outstanding, not only is it high quality but affordable as well. I have no complaints about the product and just wanted to say thank you for supplying these products to us.

Hi I've always enjoyed this type of mouse, but it has been bothering me a lot because it doesn't match my setup which is entirely white. From my recent search around Amazon, there's only a white DeathAdder Essential but wanted to see if there's also a white DeathAdder V2.

So.. this is a bit embarrassing... I just spilled a glass of juice on my desk. Luckily it didn't get to any electronics and nothing is broken at all. However my mouse cable soaked up some of the juice and now I'm afraid it'll dry sticky. I used a paper towel to get out as much as possible and used a damp cloth to try and clean the cable. Does anyone by any chance have other ideas? And yes I know it was reckless to have my glass there, I typically don't. Help would be appreciated :)

I have a razer basilisk v2 mouse. I have been using the mouse for about 2 weeks, but today I noticed that scroll click is not working. I only used it for 2 weeks and now it doesn't work? I need your help. Thanks.

i want to use button 5 as toggle for "holding down right button". when i "click" button 5 (not hold), it will behave like i'm holding down the right button. when i click it again, it will behave like i release the right button i did this in past on steelseries mouse with their software, but can't find way doing this on razer with synapse.

Hi, Short: Need to change the DPI on mac without Synapse. I have a Razer Viper Ultimate and I'll have to use it with a Mac OS. The tracking speed is way too low to satisfy my needs/expectation on multi-display setup. Requires too much palm dragging. There is no Synapse 3.0 support for Mac OS! Is there any workaround? Thanks!

I have this mouse on the way from Amazon but I wanted to make sure that I'm going to be able to reprogram the buttons on my Mac since is what I use. I see there's no support for Synapse 3 in Macs but what about Synapse 2 or 1? Can I reprogram buttons in that software in a Mac if I bought this mouse from 2019? Thanks in advance.

Hello, I have a problem with my ouroboros mouse when I connect it to the pc the cursor stops working, for it to work again I have to disconnect it and restart the pc, as soon as I connect it it does the same thing again

Is anyone else experiencing explorer.exe and taskbar hangs and using a Razer mouse? I've seen a few threads over on the keyboard side of things. I can reproduce this every single time by booting up the PC, login to any local account and switch to another account. The taskbar will hang until explorer.exe manages to sort itself out which takes around 5 minutes. The normal solution is to restart. It will very occasionally happen on startup but it happens every single account switch. This behaviour also occurs in safe mode. I'm running the latest firmware, drivers and windows updates. I can completely mitigate this issue by unplugging the mouse before first boot. I have ripped out all mice drivers and Synapse and reinstalled everything, disabling the HID compliant drivers that get installed automatically.

Hello Support Team, I purchased a new Razer Basilisk X Hyper speed mouse on 5 days ago. The mouse often falls asleep or loses connection to my computer after a few second of laying idle. Once the mouse goes idle, it does not re-awaken automatically, requiring me to fiddle around with trying to turn it back on (i.e. flipping the power switch or unplugging and re-plugging the usb doggle), Furthermore, when my computer last fell asleep, the mouse would not reconnect at all when the computer turned back on. I've tried turning it off & on, unplugging and re-plugging the usb doggle, and changing the batteries. Sometimes these methods work, but more often they do not. I've already tried disabling Synapse and uninstalling the mouse drivers per the instructions in this thread. It made no difference. - /basilisk-x-hyperspeed-not-turning-on-even-with-different-batteries.78568/#post-768964 What can I do for my mouse to automatically re-connect to my computer without the additional hassle?

Just posting a solution here since it took quite a while to figure out what the problem was. I just bought a Deathadder V2 mouse (november 2021) and my computer fails to boot. The CPU gave a warning that it was overheating (which threw me off my troubleshooting). If I was able to enter bios I could just sit and watch the CPU temp rise quite fast. I have a ASUS Z97 PRO which I then started troubleshooting (the Q-Code error says something about USB Hot Plug (b4)). It seems that changing some values in the bios would make the computer boot - until next boot time where it would hang/freeze/warn me again. I finally came to this forum where I found the solution. Set USB initialization in BIOS to "full" instead of "partial". (Solution for me was the same as the first post linked below) I've updated the firmware on the mouse to the latest version (1.2) even though I can't see any release notes about this problem. I find it very odd a mouse could create so many problems and potentially

Helo, i bought razer x lite headphones, I started to erase the activation code and erased it hard, now it is not valid, please help