Mice and Surfaces

Hey! I'm looking to upgrade my mouse and wanted to switch to Razer so I need some help from you guys, The thing I came across these two Mice "Razer Basilisk X HyperSpeed" and "Razer Basilisk X HyperSpeed" I know that Hyperspeed comes without the Dock and Also there's no RGB with it but is there any difference in their performance? anything that creates a huge gap in them? (The budget is not an issue I'm just asking about this because you know if the performance gap is minimal I'll be able to spend the extra money on something else)

Only started recently but when i try charge my mouse up its percentage is not going up at all! It says it is charging with the little bar going up and the lightning bolt but its not gone up for the past couple of hours now. I have tried everything from changing to a different USB port at the back of my motherboard, reset everything, updated everything and still having problems. Please help.

I have the Wireless mamba with the charging dock that is also the wireless dongle. When I try to run the firmware update it tells me to plug in the wireless dongle and just hangs there. I think the updater is for a different version of the mamba. Is there a way to update my firmware or to see what I have?

So my Naga Trinity broke where the mouse doesnt detect the wheel being scrolled, opened it up and saw some loose plactic bits and found a connector loose. Thia connector was on the right side of the board and was plugged in the board but the other end of the wires was soldered to soke leads attached to a small rectangle of plastic. I don't know where this is supposed to be attached to but I assume it's why it's no longer working properly. Any ways to fix it or places to buy a replacement wire? Attached image is of the wire

Hi I've had my Basilisk Ultimate for about a year now and its been having a lot of charging issues. My mouse simply won't charge anymore. I've done just about everything, left my computer on, cleaned the connection points, switched usb spots, everything, but even with the charging cable my mouse won't charge.

Hello, just wondering if anyone knows if it's possible to make it when the mouse is on the dock that the charging colors won't turn on and that your advanced effects are active instead? I have tried to figure it out and have searched the internet but to no avail. thx

So I purchased a Naga Trinity thinking it was the wireless Naga version. Well I was wrong, so I gave it to my son. While trying it out I really liked the 7 button Moba Button set. So I was greatly disappointed when i bought my pro that it did not come with the same button set, and that it was not compatible with the key set from the other as they are different size inserts. Can anyone tell me why they don't have the same button inserts as that specific button set is far superior to the poorly laid out 6 button configuration that comes with the Pro. Is there any plans to add it as aan add on as I can't possible be the only one who feels this way.

Would insta buy a Razer Version of Logi's MX Vertical mouse made for gamers... better buttons style and sensors and Razer would have a gem for us older/injured gamers. I have the Basilisk but would prefer that 57 degree angle. I wanna slap the top of the mouse and say you can fit so much RGB in this baby :P

I love the mamba build, its a bit heavier than the ultra light mouse trend these days but it screams quality. I had the previous version (that is on synapse 2) that I use for traveling (migrated to Basilisk V3) But with the death of Kobe, I think a Mamba with a laker collar would be great. RIP MAMBA

Hello friends. My mouse after updating windows (Win11 21H2) and updating 4 more Razers (pictured) can't charge anymore. Using 2.4Ghz Wireless is still good, the battery displayed at the synapse still decreases when in use, but recharging does not increase the battery % even though the synapse still says charging. If anyone knows please help me :( Thanks for reading !

Hi All, I just got Naga Pro mice and I was going through the documentation and I see this line mentioned in it on page 8 as well as on the website of this product "Gaming-grade tactile scroll wheel with infinitely customizable resistance". So how do I do adjust the resistance of my scroll wheel?

Hello everybody, i'm looking after buying a new mouse and i've been looking after the Death Adder Mini v2. Question is, can i turn lights off without keeping Synapse open? I'm okay with installing Synapse to tune the options, but then i cannot keep it always open because most of the time i work on a Linux system. I'm not looking after any particular light effect, just turning them off permanently. I know i can open it and kill the LEDs physically, but i wouldn't like to invalidate the warranty... :) Thanks in advance.

Hi, I just got a new Razer Viper Ultimate with the charging dock. Whenever I plug my dock into my gaming laptop, the dock doesn't turn on. I followed the steps on how to clean it and that didn't work. Please comment if you know how to fix this problem :)

i.e. something to change the firmware so it doesn't do an annoying light show By default I'd prefer it to simply turn off all the lights, so if someone has to borrow the mouse they don't have to endure the unicorn vomit Even when I'm rebooting I have to suffer the silly lights until the s/w kicks in. This is all perfectly possible (I understand microcontrollers), just a question of whether razer, or someone else has done this already. I'm guessing its a no, I just don't understand why Razer would not allow something so simple. Pity the firmware isn't open source.

I have owned at least 5 naga MMO mouse and I always run into the issue where one of the switches will start acting up clicking too many times or not at all it seems like the newer the mouse the quicker I would run into this problem down to not even owning it for a year and having this issues. I have not been using a naga mouse for about a year trying other various mice. I really would like to buy another Naga trinity or maybe a pro but I was wondering if this problem has been addressed. I know it's not just me cause I have seen various youtube videos on how to take apart your mouse and fix it. If anyone knows something about this please let me know. I honestly don't like the idea of buying something that I will have to replace or send out for warranty and have to use a totally different mouse till I receive a replacement.

So this is rather annoying. I use a Razer Sphex v3 (the black ones) on my office desk at home, as the built-in leather pad is black, and having the black Sphex v3 mousepad on it makes for a great mousepad, while also blending in to the overall aesthetic of the desk. However, I've had two separate Sphex v3 mousepads, and both have started separating on me (this never happened with my previous Sphex v2 mousepads). To the point where I get what looks like a "bubble", similar to what you'd see when putting a screen protector on a smartphone and not being able to get the air out from underneath it. Unlike a screen protector, no amount of pressure will eliminate this big, greyish - white "bubble" from my mousepads. The pad doesn't feel any different or interfere at all, except from a visual perspective (I picked a black Sphex v3 simply because it doesn't add bulk, and it blends into the black leather surface of my desk). Some QC issues on the part of Razer, I think. Anyone else?

Hi my Mamba battery died after about four years and I don't want to just use it wired nor do I plan to drop another few hundred bucks on a high end mouse after such a short time. I'm looking into replacing the battery but I can't find the exact specs anywhere. I've already disassembled the mouse but sadly the specs are also not printed on the battery. Can anyone help out and knows what specifications the battery has so I can order a new one?

Hi this is my first time posting here but I have a question about the Razer Naga X. I bought this mouse a day ago when my Naga Trinity bit the bullet and couldn't click and hold anymore and needed a replacement ASAP, however when I received the mouse I noticed on the bottom it has thicker white pads instead of the slim and smooth black ones that every other mice I have seen or own use. At first I thought they might be something you peel off but they seem to be just the pads you use and when I tried to use them, they have terrible traction and scratched up my mouse pad. They look really out of place on the mouse as well so I'm wondering if this is something that might have just got past QC or something. Included below is an image of the Razer Naga X with the white pads, images of the Basilisk and Naga Trinity with the original pads that worked fantastically, and the scratched mouse pad after using the Naga X for only several minutes.

Hi! This is the best mouse I've ever used. But why the indicator under the mouse is showing by the color only CPI? I use 400 CPI for every task, and it's glowing red. Why this is not working like in DA V2 Pro? I'd like to assign on-board profiles to separate colours (profile 1-red, profile 2-blue, profile 3-green and so on), and then use my mouse with different machines without need to install Synapse. Switching profiles should change the color thad I'd know which is active at the time. I hope Razer will update this feature in the next firmware release. In my Razer Deathadder V2 Pro it works as it should be. I'm also wondering if Razer have some plans for USB-C dongles or even universal USB-C dongles to pair with their existing products. Cheers!

Hello, I have a driver problem with the MANBA TOURNAMENT EDITION mouse I would like to reinstall it because it is no longer synchronized in terms of color but I can't find the corresponding driver do you have a link to the correct driver? thank you

Comprei meus diamantes mas não chegou na minha conta efetuei o pagamento

I purchased this mouse recently and when charging it only seems to charge to 98%. Maybe once or twice its fully charged but seems rare no matter how long I leave it. Maybe this is normal but it makes me worry that this could be a technical fault and could lead to future issues. I have tried using the Dock and plugging the mouse in directly. Both are the same. Does anyone have any advise please? Thanks

Hello, does this mouse have a macro ? DEATHADDER ESSENTIAL RZ01 How to activate the macro no ricoil

What are the differences between different types of Razer Viper Mini models? Examples: RZ01-03250100-R3M1 RZ01-03250100-R3C1

I have white Razer Atheris mouse and it disconnects from time to time taking my bluetooth repro with it offline. Other black Razer Atheris mouse that I have doesnt make it so I think the white one is rubbish. It is under warranty almost four years yet so not a problem to return it and get it fixed or replaced I guess. On dongle even the white one works fine so in case u have issues with bluetooth, the dongle is an option.