- 199 Threads
- 753 Replies
So I upgraded my setup yesterday, and now I am having problems with my Kiyo. For some reason StreamLabs OBS and normal OBS are no longer picking up my Kiyo. I go into Synapse and it works there but not in OBS. I don't really know what is different today vs yesterday besides the fact I got everything on a M.2 and a internal SSD but that shouldn't be a problem.
Hi, I am thinking of getting the Razer Ripsaw HD Game Capture Card and set up like this: Plug HDMI out from Laptop in to Razer Ripsaw HDMI input Plug my headphones into the Razer Ripsaw Plug the Razer Ripsaw HDMI output into my 1440p 144hz Monitor Plug the Razer Ripsaw USB into a PC dedicated to streaming My questions are - Will the Razer Ripsaw do 1440p 144hz Pass through ok? Will I hear gameplay and be able to talk on my mic plugged into the Razer Ripsaw? (Discord on the gaming pc) Or, do I leave headset plugged into laptop and use some software to mirror sounds between headset and the HDMI output? Note I don't use laptop screen at all it is always turned off. Reason I am looking into a device like the Razer Ripsaw is because at the moment I am streaming WoW off my laptop but it kills my FPS in game a bit. Want a solution where I offload streaming to my spare PC. Thanks in advance to any advice you can provide!
My Seiren Elite will not install its proper firmware, it only shows up as USB input device in device manager (under Human Interface Devices), and when I reinstall it "Bravo HD FW Update" is installed instead. Important note, the microphone does not light up its LED as well and disconnecting it will play the sound notification for windows.
Hello, i'm a streamer and i use Streamlabs for diffuse my stream. I have download a new firmware for my Razer Kiyo (01.01.023), but he is dropped my fps, i use my kiyo with 60 fps, the fps stays at 15 even though it's set to 60 ... You have a solution ? this has happened since the update ... S/N 401813L01701115 It's possible to back to the old fimrware ? (01.01.022) Thank you for your reply, and excuse my bad english, i'm VietNam
So im in the need for a new mic, iv'e done some looking into both mics, and while i don't record anything professionally, i only stream occasionally and game, here is why im a bit on the fence. I have extreme jaw issues and neck pain from bad jaw clenching, in the past ive owned i believe a. hyper X headset and it increased my pain in my jaw due to the pressure from the headset on my joint. Im unsure and have never used a razer headset before and would like to know if the pressure on a kraken is just as bad if not worse. so far im leaning toward a seiren but would like some more opinions from those who know razer better than i
While not officially supported, website states that it does not work with osx, the latest version of of osx does support the ripsaw hd. You can ignore the lagged frames as I was just doing this on battery and did not change the screen resolution. See attached screenshot.
So let me explain my situation first as it might differ a bit from yours. My setup is PC-Ripsaw HD-PS4. I didn't have a 3.5mm headset, just my Razer Kraken 7.1 V2 which uses USB and was connected to my PC. So what I wanted was, to hear my PS4 audio through my headset via my PC. But that doesn't just do it by simply connecting your PC to your Ripsaw to your PS4. So in order for you for this to work, your headset needs to be connected to your PC, which I hope is possible for you! I have 2 monitors and I just hooked up one to be my PS4 monitor whenever I want to play on PS4 so everything for me is close to each other. Now on to my workaround. I use a software called: VoiceMeeter Banana: https://www.vb-audio.com/Voicemeeter/banana.htm. It's free software. You might want to download their virtual audio cable as well, so you can expand some things, though for this solution it's not necessary. If you have a huge setup with lots of software and want to fully customize, you could get VoiceMee
With the introduction of the Elgato Wave line and the Wave Link software basically being a virtual goXLR. I'd love to see Razer come out with similar software for the Siren series of mics. Currently running a Siren Elite, and I gotta say the Wave mic is looking very tempting.
I just got my Razer Ripsaw HD capture card set up so I can try to steam some ps4/switch/and other console games. I am running into and issue where my streamlabs obs video output for the stream is tinted pink and I haven't been able to find a solution for the issue. So I was wondering if this has been a common issue for other users and if anybody has been able to resolve this problem? Thank you to anybody that does reply
Preface Hello and welcome, I know a lot of people have issues getting there Razer Ripsaw HD to not back screen, I was one of them, I was so excited to get my new capture card to replace my 1080p30 / 720p 60 Blackmagic Ultrastudio Thunderbolt 2 device as my poor streaming pc a Macbook Pro Late 2013 was starting to show its age. So I decided to go with Razer as I already had a Siren X and a Naga 2014 left handed , ( still need a replacement usb cable for that. ) , and I have no love for Elgato I pulled the trigger on the Ripsaw HD as it seemed to be getting good reviews on the net. The card came the day before yesterday so as of the time of this writing I have had the card a little over 48 hours. Was excited plugged it in , hooked up my sources, booted up windows and obs black screen, and unable to see any image, was like ok, so used the ps4 remote app and it was detecting my display a 4k60 umm no worries a few cable changes and wala passthrough working no obs input though.. A
So I have everything set up but for some reason it does not pick up people talking in game chat not sure if it is just call of duty but when i record it wont pick up people talking just my game audio im on ps4 also using astro a40 for my headset i can hear them in my headphones just fine just when i record a game and go back you can't hear the person talking just me talking to them any help
So I pulled the trigger on this sweet looking mic but the 8 bit doesn't seem to work. Also, ever since downloading the streamer companion app my profiles in chroma go away unless I turn off the app in chroma apps. Pretty sure I got this thing set up right, so anyone with any ideas? I've already got a support ticket in but haven't heard anything in almost two weeks(when I opened ticket). All suggestions appreciated.
I saw a thread that was posted a couple years back about being able to run your 144Hz monitor while streaming using the Ripsaw. It has the diagram using DVI to connect the monitor to the graphics card. I have a 2060 RTX Super, there are no DVIs. I have one HDMI and 3 Displayports. How can I still get this done? Do I connect my monitor to my 2060 via Displayport and then run one HDMI from the 2060 to the Ripsaw HD? this is the monitor I am going to buy: https://www.newegg.com/p/N82E16824475003 The link to the thread created several years ago: /guide-using-your-144hz-monitor-with-the-razer-ripsaw.12764/
So, got myself the ripsaw HD today to replace my old ripsaw, making sure my setup will be 4k proof when the time. For the next consoles comes around. After a bit of mucking around, i got the video and audio bot working (took a bit), but the only problem. Is is that my audio is choppy/cracking sometimes or just dissapears for a second or two sometimes. Anyone know of a fix for this?
Bonjour à tous, Je souhaites streamer sur Twitch en double pc, je dispose du boîtier Razer Ripsaw (pas le HD 4k) j'ai commencer à l'installer jusqu'ici tout aller bien, j'ai l'image du pc sur streamlabs obs, mais le problème c'est que je n'ai pas le son du micro.. Quelqu'un pourrait m'éclairer la dessus, j'ai chercher toute la journée d'où ça pouvais venir et vraiment j'ai rien trouver... Merci beaucoup
Any time I change settings on my Kiyo with Synapse on my Windows10 machine, the webcam in Screnncast-o-matic stops working. Sometimes when I unplug the Kiyo and plug it back in, that seems to help. Is there a way to add Screencast-o-matic to apps that the Kiyo works with? Or a way around this?
Just got a Seiren X mic. I installed Synapse 2, which of course doesn't launch just like everyone else. Further windows was only seeing the Seiren as speakers. I uninstalled everything (application, manual delete of all remaining directories in appdata and windows in general), removed device from device manager. Then installed Synapse 2 again, reconnected the device and now at least windows sees it as a Mic and Discord can pick it up. However, I can't alter the pick up pattern, which is the whole reason I bought this mic in the first place. I've tried every work around I've found on the forum. Reinstalled clean multiple times, tried old versions, tried installing surround, even tried Synapse 3 just for shits and giggles. Is there any other way to alter the pick up pattern than Synapse?
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.