General Discussion

Hi fellows, one question is bothering me for quite some time. WHΛT IS THΞ DΞFINITION OF Λ RΞΛL GΛMΞR? I have seen and heard various statements about the meaning of the word gamer, though most of the people, including some of my friends considered that playing games was just a part of the childhood, and that when you get to have a job and girlfriend, gaming slowly dies. It's not my case tho, i love to play games, i still do and i don't feel any shame about it instead i am quite proud about it. So even if i don't like all the games out there, i still appreciate the idea of gaming, of playing together with other people. I don't know how to say it, there are just things that feel good, like the endless rages you get, sleepless nights and so on. But personal. i think i have a more accurate definition for gamers. Gaming is a way of living, a lifestyle, if you're truly into gaming nothing should get in your way, at some point or another, you'll always find time to play. What do you guy

I just got my brand new razer blade pro 2020 with 300hz refresh rate. I tried to install the latest graphic driver through Geforce Experience but it says the originally installed 442.53 is the latest version available, which is clearly not true. I tried to download directly through the Nvidia website but the new driver is incompatible with the Windows installed somehow. Moreover, the dedicated RTX 2080 super max-q refuses to start at boot. I have to disable the card and re-enable it to start it every time I boot up my laptop if I want to use the card. The system recognizes the card and it works perfectly fine after I re-enable it. I believe it has something to do with the firmware or the bios that may have created a conflict somewhere during the boot-up process. Please let me know if there is any resolution to this problem.

Hi Folks, I just bought a viper mini it came from One of retailers from china an Asia version of viper mini and one thing that I've noticed is that the LEFT and RIGHT button will click by just tapping it after it registered on the sensor. plus the fact also that the clicks were also connected to the PAW Sensor. In order to eliminate this I need to lift up the mouse and then when I put the mouse down and click either the right and button again then will return again to a "One tap" click state. It's not a very serious issue but it's kinda Annoying I hope that there's still a way to fix this issue. Thanks guys if there's anyone here that can share this thoughts regarding the issue of my Viper mini.

Is there a list some where on Razer's web site that shows what devices require what Synapse's to use? It would be very helpful to keep all my Razer products on the same cloud software.

Okay so lets see if someone can help me out! Is there any way to make a keybind that turns a macro on/off with another keybind? Example: I have a macro that spams my rightclick WHEN I hold down rightclick, but I want to stop that macro by pressing "X".. Is there some possible way to do that? Again; I want to HOLD DOWN rightclick to make the macro work, but I wont to deactivate the macro with "X" so rightclick doesnt spam when I hold it down again. Hopefully someone understands D:

And you thought the lines at Costco were long First of all, shout out to all the people out there on the front lines dealing with this pandemic. Whether you're a medical professional or the grocery store cashier, I appreciate each and every one of you out there. Please be safe and if anyone here is or knows someone who is out there every day, please send them my love and respect. Yep, random dude on Razer Insider says he loves and respects you. I stand by it. This morning two of our team members had difficulty logging in because of internet troubles. Bandwidth is being eaten everywhere because many people are working from home and flooding all the data tubes. Netflix and YouTube are defaulting to standard quality. Steam is limiting auto-updating of games to the three most recent played. It seems that companies everywhere are doing their part to lessen the load of data being squeezed. It's so easy to think of data as being this magical thing that seems limitless with wifi and the clo

hello is there any way I can run razer synapse 3 on ubuntu 20.04 without open razer I would like to use Linux instead of windows

I have been waiting for a while for the viper ultimate (maybe with viper mini ultimate please release that too...) with new colors. Although I could get it custom colored on colorware, I prefer stock colors from Razer. mercury or pink, it don't matter. If I am the only one waiting for this... then so be it, but if people want a viper variant (wired, wireless, viper mini, etc.) Please contribute... so it can release faster... My wired viper is wearing out now... from all this waiting. (I do have the hyperflux mamba also, but all these black peripherals are messing with my setup)

I have a 2018 RB 15 Advanced with 1070 and a RB V1 Core. On connecting to an external monitor (without the Core attached) my RB 15 fan speeds are quiet (almost silent) under normal load with Synapse 3 set to balanced mode. Once the core is attached (with external monitor connected through the core) the RB 15 fan speeds actually increase to a consistent low level but definitely louder than without the core attached and Synapse settings set at balanced. The temperatures remain the same with or without the Core at 55/65 C, again with normal load/activity (not gaming). Unlike many with Core fan noise issues, my V1 Core operates relatively quiet without much increase in fan noise while gaming and virtually silent under normal load. My expectation would be to see the opposite experience with RB 15 fans slowing on connection of the Core if temperatures/settings are the same. I am assuming Razer has programmed the BIOS of the RB 15 to increase fan speeds on connection of the Core regardl

I hope z silver is auto claimed soon

I love the pudding key caps, that hyperx and ducky are making any way I can request razer to make one that is compatible with the razer huntsman elite? It would making the RGB on the hunstman elite even cooler. Thanks in advance.

Can the RAM be upgraded? If so, what is the max amount and max speed? Also, can the SSD be upgraded? If so, what is the max accepted? I tried looking on the support page for this model but very limited info on the page and in the master guide no info. Thanks!

I have a blackwidow elite and it's not letting me edit anything or click it

Just got a new Razer Blade pro 17 2020 was trying to adjust auto brightness but can’t seem to find it anywhere, is this laptop equipped with auto brightness? Since it was 3 and half grand I was expecting it to be!

Howdy, Does anyone know when the Razer Blade 15 will be back in stock? Also, if anyone has one how is it? Stank you :)

Looking for help with Lighting effects for multiple devices all simultaneously operational. I have a Black Widow, Black Widow TE v2, and Mamba. The problem I'm having is that when I import a profile, I cannot get all three devices to run the same effects. I noticed that when I choose quick effects, lighting is applied across all devices, but when I try the same with advanced effects only the TE accepts the effects and the other devices don't apply the effects. It instead gives the option of going to chroma studio. I tried painting the same effects but that wasn't working. I would like to know how Ior get instructions on how I can get the advanced effect to apply across all devices the same way I get the quick effects to apply?

I just bought this mouse today. I'm a 3D piping designer and BIM coordinator and I use this mouse for work. I am trying to set up all of my buttons and I can't seem to set up the Windows shortcut keys on any buttons. I follow the proper set up and when I click 'save' I get an error that says "This mapping requires Synapse" I'm trying to set up COPY and PASTE buttons To the best of my knowledge I DO have synapse running. It's defiantely installed. I don't know but it's getting frustrating and I need to get back to work. Any input would be greatly appreciated.

At the time of this post there are 3 hours until it goes live. Any guesses on the price? Launch games? So many leaks and rumors, let's see what happens.

Hello, I hope everyone is fine! I plan to buy a new Razer mouse, and the one I have now I want to give to a friend. I would like to know if it was possible to unregister my Mouse from my account, so that my friend can register in his... I await an answer! Thank you, Tomás! :)

Hello guys ! I have a question. How do we syncronize Twitter and Facebook accounts with Razer ?

I bought a “razer kraken tournament” headset and i found out that to use the 7.1 surround i need to download it to the computer,but i play in ps.so i cant use the 7.1 ? thanks.

Hi everyone, I have Razer Blade 14 I broke the LCD I found local online a company NiwTech https://www.niwtech.com where they offer to fix the Laptop for me and after they fix it they give me back the old part but wasn't Razer it was LG brand when I went back to them I said this is not my part my LCD should be Razer they said Razer never had an LCD brand by them self they use different brands. is this information right or they swab my original screen with something else? Thank You

So the story is, I have a Man O’war 7.1 surround, wireless model, and my wireless dongle has unfortunately broken! My question now is could I possibly use the nari dongle for it if I purchased one off the razercare store? Could I even buy one from the razercare store as I’m in the UK?

I'm using Razer Kraken Pro V.2. Does my Kraken can use surround? And how to get the code?

I have a Samsung C34J monitor, and when I plug my HP Spectre to the monitor via Thunderbolt, the laptop will charge. However, my Razer Blade Pro 17 (early 19') will not charge. Is there something in the settings that is required for the laptop to get charged via the external monitor?