Keyboards

I've just purchased the BW V3 Pro and cannot for the life of me get the 2.4ghz wireless mode on the keyboard to work. I have tried the following. - Followed Razer instructions on 2.4ghz setup - Downloaded most recent firmware updated and both keyboard and dongle are running most recent versions - Downloaded and run both the pairing utility and the hyperspeed dongle pairing utility - both worked and confirmed device had been paired, however when I unplug the keyboard from wired connection then flick the switch to 2.4 the keyboard goes dead (all RGB turns off) and there is the audible windows device disconnect tone. The dongle appears to still remain connected. - Uninstalled Synapse (x2) and reinstalled (x2) - no change - Explored in the windows device pages covering keyboard drivers and all (when checked) say most recent drivers are installed. I have tried to connect via bluetooth on another device - this worked, however when trying wireless mode the keyboard immediately goes dead

synapse shows the screen where you can use this function.

I have been using this two products for some time now. Actually i already changed one Tartarus and bought another one. At the beginning they worked fine. But after a few months scroll wheel on both of them (not at the same time) started with problems. When want to change the volume on the keyboard, if i want it to go up, it jitters and at one moment it is going down, while i am scrolling up, and at other moment it goes where it should. It is like this: If the current volume is 50% and i want it to go higher, i scroll up and it starts jittering first to 42%, then to 56%, then to 38%, 48%, 60%, 54%,46%, 58%… and i have to scroll up until it finally is on the number i desire. The sam is when i want to zoom something in photoshop or some other program with Tartarus. Images are going smaller when i want to be more zoomed in. And at some point it starts to go in the right direction. I find somewhere that this is a general problem with Razer scrolls on most of the products and it is some k

Apres passage en Windows11, je ne parviens pas à gérer les couleurs de mon clavier chromaDeathstalkerN°   PM1536150701964   RZ03-01500500-R3F1

İs the Razer Blackwidow Tenkeyless compatible with PS5?

Can I get replacement keys for the Huntsman v2 linear optical keyboard for Mac Keys,I have been using only Windows keyboards on my MAC, It would be super cool to have just the MAC keys  (assuming they are really easy to change)Thank you

I bought Razer Ornata V3 X keyboard. How to turn off the info bar on the screen in any game? I mean the bar with FPS, CPU temperature and graphics etc. - on the top left. I go to 'Settings' Chroma, turn off notifications and nothing. I go to 'Loaded games' Synapse, I remove the game from the list altogether, nothing - the stubborn bar still won't go away.

After switching from Synapse 3 to version 4, the settings for the Huntsman V2 keyboard stopped working, and the keyboard no longer responds to changes in lighting and other settings in the program. What could be causing this issue?

help pleasekeyboard is razer hunstman v3 pro 

Im charging it but its stuck at 0 percent, even though its been charging for while, any soloution?

Hi, for the past four days I've been dealing with a keyboard issue. When I play certain games — namely Deep Rock: Survivor, Dead Island 2 and Deep Rock: Galactic — the keyboard goes "crazy." First, I hear the disconnect sound, then the RGB flickers a couple of times, turns off, I hear the reconnect sound, and once the RGB lights come back on, the keyboard stops responding — or if it does, it starts spamming a key. I've tried every possible solution, including those recommended in Razer's support guide. This issue only happens with the games I mentioned — on the desktop, the keyboard works and responds without any problems.Also, I’ve noticed that the “Analog” model of the Huntsman V2 does have a firmware update available, which is not the case for my version.Here are my PC specs: Ryzen 5 3600 16 GB RAM 3200MHz RTX 3060 Ti (Driver version 576.52) 500 GB WD Black M.2 SSD + 1 TB XPG M.2

Hi, i accidentally clicked fn+f9 combination and i turned on macro, when i wanted to turn it off this combination doesn't work no more and this red light is flashing all the time and it makes me mad, someone can help me? please, my keyboard is Razer Ornata V3

Just got myself blackwidow v4 75% orange and Im wondering can I just switch the y and z keys? 

First of all, the problem is that I forcibly pulled out the stabilizer and I can't put it back in. And I'm trying to clean the inside and disassemble it, but there seems to be no information on it in the world. Can someone tell me?

Idk how I manage to do this but my factory default setting has changed to my valorant setting closing synapse or switching to other computer doesn’t help how can i fix this  

2 days ago. I updated the razer synapse beta. I saw that the beta synapse now supports the Razer Huntsman V2 Analog. The issue is which is big is that when I have to start my pc, my keyboard is unresponsive. I can unplug 1 usb out of the two. The keyboard gets responsive but only for a few seconds and I have to be quick to type my password in.So far, the only solution ive found to this issue yet is to go under the razer synapse beta. Find the Huntsman keyboard. Click on the “?” on the top right, which is the help button. Under the help section you have to find “FACTORY RESET” and then you can reset the keyboard. That is the only solution ive found

I have a Blackwidow V3 Tenkeyless connected to two PCs via a KVM switch, at some point after switching, the PC recognises the keyboard but the LEDs all go out, the keyboard works normally just without LEDs, is there a way to get the LEDs on manually, I don’t want to install Synapse as one is a work PC.

The Switches on my razer huntsman mini are sticky the letters s,a,e,q,d,w,f,ctrl,space, and left shift and when the switch is pressed it takes a whole second to come back up and when it  stays down it just spam the letter consistently especially s,e and q if someone could help me it would be much appreciated please and thank you.

Same thing here with a Blackwidow V3 TKL… Wtf is happening. There is very much people with the same problem and no one helps

Why are there so few new keyboards available with Nordic Layout?I’m looking to replace my BlackWidow Elite with orange switches and nordic layout, but there are no new Razer products available with that config…BlackWidow V4 75%… nope, no nordic layout.BlackWidow V4 75% Pro… nope, no nordic layout.Even the full-size BlackWidow V4 Pro is missing this layout with orange switches…I’ve waited almost a year looking for a new keyboard. Preferably 75% but I could do another full-size. Soon I’ll have to go a different route and but from another manufacturer. And that’ll mean I’ll also replace all my other Razer gear down the line (mouse, speakers, webcam, enclosure, etc).There used to be a nordic layout option for all (or most) keyboards. But maybe Razer no longer care for customers outside the US :-/And yes, I’ve looked for other keycaps to replace but there are no good options.

Q.Can I connect my keyboard and mouse at the same time with the Hyperpolling dongle of the Blackwidow V4 Pro 75% product?Can I connect only the Blackwidow keyboard?Isn't the mouse compatible?Do I need to purchase an additional Hyperpolling dongle to connect the mouse?

WHERE CAN I BUY A REPLACEMENT FOR THIS ? THE WRIST REST FOR THE HUNTSMAN ELITE.A GOOD PRODUCTS NEED A GOOD AFTER SALES SERVICES AND FOLLOW UP ON THEIR ACCESSORIES. IF THEY LEAVE US TO WONDER OR NEED TO BUY A WHOLE NEW KEYBOARD WHEN THE CURRENT ONE IS NOT FAULTY. IT ALL GOES BACK TO WONDER IF WE GET THE CORRECT PURCHASE IN THE FIRST PLACE.SOMEBODY FROM RAZER PLS REPLY.,

 My # key no longer lights up when Synapse starts. When I close Synapse, it lights up again. I installed Synapse 4. Does anyone have the same problem or know how to fix it? It seems to be a software issue. I've already reinstalled the software, but that didn't help.

I have black widow v3 pro and it spamming the keys not  specific ones sometimes when i press it not responding or want a hard press and sometime spamming it I've tried all the ways and Tutorials on the internet and they doesn't work .. i also downgrade the firmware and the same problem stays any one can help me 🥺 

I was playing Path of Exile 2 yesterday when I thought that it would be the perfect game to play with my old Tartarus V2 I got back when I used to play WoW and FFXIV. It was a pretty useful tool back then and I feel like hardly anyone was using them at the time despite how awesome it was. I looked up reviews for it and I was surprised to see that it was a lot more popular than I remember, many people were using it for video editing or art programs as well thanks to its abundance of programmable keys and its high level of comfort when using it.Anyways, I plugged it in and set it up similar to how I remember for those other MMOs, but it just wasn’t working. My thumb was getting really cramped from how far my fingers were stretching to reach the top buttons while also working the d-pad. Also there’s a dodge button in PoE 2, so I had to put that button among the ones near the top and it was throwing me off. Also the D-pad that I once had no issues with in games using a free