Mice and Surfaces
- 1,792 Threads
- 6,227 Replies
I Just purchased this mouse and I have the correct software downloaded to be able to re-keybind the side. Plate of 12 buttons.. I go to the mouse binding option and the little screen pops up and its not letting me change the key bind at all.. I have spent the past 2 hours looking things up on google to hopefully find a solution and I am not getting anywhere.. Can anyone help? I would like to remove the default keybinds so I can get different hot keys rather than ones I already have in use
I bought the Hori Tac Pro M2 for PS4 knowing it had a cheap mouse. I intended on buying a better one because, based on what I read, any corded mouse "should" work. I tried my friends Corsair M65 and it worked until I hit the crosshair button or rolled the scroll wheel. I heard the Deathadder worked, so I bought the Deathadder V2 today. As soon as I plug it into the Hori keyboard it shuts the entire control system down. Has anyone had any luck getting a Razer mouse to work with this system?
So Im loving my new viper ultimate but I have an issue with using the usb adaptor with the charging dock via my TB3 dock. Basically if I use the usb adaptor in the dock, everytime I boot up my laptop (Razer Blade 15 2018) the mouse and dock lights up but the windows cursor will not be present. Ill have to unplug the usb adaptor from the dock and reconnect it and turn off the mouse with the bottom switch and on again before the mouse will work. I have gotten around this by plugging the usb adaptor into another port on my TB3 dock and it works perfectly, able to use the mouse as it should be on boot up. Then I have the dock just for charging the mouse when I need to. However this is taking up 2 usb ports instead and while it works it just annoys me that I cannot use the usb adaptor plugged into the dock the way it was meant to be. I have already updated the firmware on the mouse and dock as well as my TB3 dock to make sure all drivers are the latest but the issue remains
Before using Viper Ultimate my USB ports powered off when I put my laptop into sleep mode. It was very convenient for me since I've got a lamp connected to one of them. Now, when the Razer dongle is connected, the lamp stays turned on in the sleep mode. When I disconnect the dongle everything goes back to my preferable state. Can there something be done about it?
Hello guys , i need your help i am currently based in saudia arab (middle east), i bought razer lancehead wireless from jarir store, unfortunately after buying it i had to travel pakistan for my mother liver transplant i stayed there for a year when i came back i tried to use my mouse but after unpacking the box i couldn't found any cable(wire) . my mouse is completely useless without cable. i cannot claim the warranty i checked razer care store but its only for inside US customers . could you guys please help me or guide me where should i get the original or good quality cable. thankyou so much in advance
Bought my Naga 2012 as soon as my local seller had it available, now after over 7 years of service it has finally fought its last battle. After countless headshots, millions of clicks, unnumbered amount of raid bosses and slashes it has fallen with no more continues left. Tomorrow I will go and see who will try to follow his footsteps on the path of honor and glory. Good night, sweet prince
Recently, my razer naga trinity seems to default to a white-blue color and while doing the Reactive effect on my mouse it keeps flashing from the color I set (Red) to the white color I mentioned before. Random fixes I found: -having ANY window fullscreen on my 2nd monitor makes the bug not happen. -closing ALL Windows OS processes that have razer in their name and restarting the razer synapse also fixes it. This bug is not acceptable for a razer product please fix this or offer a solution.
TLDR; title, hopefully I conveyed it well enough. I have a Razer Naga Trinity, model no. RZ01-0241, and I've been having an issue for a good while, probably since I started using these settings (to follow). I play an MMO with targeting skills - one press to bring up a reticle and a second to fire it - so I use the turbo settings for the numbers (12-button plate) and wheel tilt to save my fingers a great deal of fatigue. And this works beautifully like 70% of the time, but occasionally, the button keeps firing after I let go. This leads to firing off wrong skills at wrong times in PvP situations, and totally screwing up mechanics in PvE, often to the detriment of the group I'm running in. Then I gotta fire it again to get it to reset, and hope it doesn't happen again. I've already ruled out that it could be the game, because it's happened in at least 3 so far (Guild Wars 2, Grim Dawn, Starbound). And I believe I can also rule out that it's a mechanical issue, because I've never notic
Good evening Have dilemma: Get Mamba wireless as a gift. And it is a nice mice. BUT: Basilisk X HyperSpeed can work longer without charging and have Bluetooth, that's very convenient for using with laptop and PC. And as I understand they have the same optical sensor... So I'm start to think about selling mamba and buying basilisk... But maybe I'm missing something and mamba is better? Will be grateful for your opinion:smile_:
I can not be the only Ouroboros owner in pain as their mouse slowly withers away from years and years of service right? I have used this mouse for almost 7 years and it is still going strong, it is just starting to scrape as the pads on the bottom wear off. And honestly, I would just love to see this batwing mouse to come back with all the latest tech Razer has to offer. The ways in which you can configure an Ouroboros with the interchangable side panels and the extendable backplate (?) makes it just a great mouse. Plus after almost 7 years i kind of just dont want a different mouse...
How do I know if the Mamba wireless mouse is charging without turning on my computer. Does it light up when charging then turn off when fully charged? Do I have to use a computer or laptop usb port to charge the Mamba or can I use the same wall charger I use for my phones and portable batteries? Thanks
Have you used a regular USB wall charger to charge your Mamba the same chargers we all use to charge our phones and blue tooth speakers and portable batteries, etc. Does that work. Does it charge properly. Got 2 different answers from 2 different Razer reps so i figured I could get some help here from someone who o has had the mouse for a while. One rep said using a wall charger is fine the other said that could overcharge the battery causing a problem. I'm thinking once the Mamba reaches 100% it will simply stop charging like my phone and blue tooth speakers. Thanks
with the deathadder v2 and the basilisk v2 released, you can see that they went back to wired (basilisk) and gave it all the extras that their new wireless mice have (sensor, mouse feet etc..). I would love to see a new version of the wired viper with some extra features. what do you think?
i want a gaming mouse, but it cant be with loud clicks, while i start gaming only after family gets to sleep. i know gaming mouse cant be completely silent however i believe some models are more noisy and some more silent, do you have any recomendation for which model i should look to?
Does anyone know if the firefly or the hyperflux hard surface is the same as the vespula v2? Ive owned them all and they seem very similar but Synapse does not have support for the vespula v2. It seems its only supported for the old one. I could be wrong. Any thoughts? I'm trying to calibate my lancehead properly as its jumping all around this hard surface.
When lighting is turned off on the mouse - which is required for optimal battery life - the mouse no longer gives a charging status indicator - i would think that even though lighting is disabled in general use there would at least be the option to have the mouse light indicate charging status as it does when lighting is left on - lighting on = less the optimal battery life. thanks
Hi everyone ! I'm using the new Basilik Ultimate, and it's really awesome ! I just have one question : when I use the charging dock with the mouse on it, how can I shut down the light on the mouse when it's fully charged ? Cos it always stays on, and keeps me awake at nights with its bright green light I've looked into different Synapse options but nothing seems to work... Thanks !
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.