Mice and Surfaces

In the downloads is a firmware update for the Razer Basilisk V3 Pro Firmware Updater | RZ01-04620  Is this firmware also for the “Basilisk V3 Pro 35K” ?

No, now it's over for good, I don't want to have anything more to do with your stuff, the end

I have a proplem with Basilisk V3 Pro And Mouse Dock Pro. They are working nice, but when I dock the mouse to charge (and if Synapse 3 is enabled), Synapse doesn't update the battery level when moude is charging (but mouse is charging). And that' why the RGB light indicator of battery level doen't update too. When I redock the mouse the battery level is fetched and then doesn't update again. I did a lot of things. There is a list of some of them:- Reinstall Synapse (clean, recovery, update, switch to Synapse 4)- Check at another PC- Change USB ports- Change all possible settings of mouse and dock in diifferent combinations- Try to find dependence of this behaivor according to Chroma settings- Of course, I wait some time, but battery level doen’t update and light color on the Dock too- Try to inspect logs of razer synapse- Always update firmware of mouse and dock- … etc. But nothing helps. If I disable synapse, It works well. Looks like a program/firmware bug.

I’ve been looking for a new mousepad for a while now since I had mine for like a couple years and there’s a lot of unwanted friction (even after periodically washing it). What’s the best mousepad for speed and for the best value? Should I settle for the Atlas even though it’s 100$ or is the Strider or Sphex better in terms of like less friction per money?

Dear Razer TeamI bought a Razer DeathAdder Essential mouse, I wanted to register it but it says that the product is already registered, I am very disappointed because I bought it with my last money. Waiting for your answer

I’ve been using Razer products for almost 10 years now and I wanted to post some thoughts about my experience followed up with a question about future products.The first Razer product I ever bought was the Razer Naga 2014. I bought it back in 2015 (almost 10 years from the date of this message). I’ve had it this entire time and it’s never broken. All the buttons work flawlessly. And the older Razer Synapse software is lightning fast, responsive, and never has issues. I originally used it for World of Warcraft, but soon after that I started using it for my work (game dev). I was able to map the 12 side keys to all the software I use (Maya, Unity, Unreal, code IDEs, etc). These are my thoughts on the designs I’ve tried over the years.Naga 2014 (The best model by a long shot) Button #5In the 3D software I use, the middle mouse button’s click is used to navigate the viewport, but I’ve found the amount of force required to activate the middle mouse click over and over all day becomes exhaus

Hello, I just got a new Deathadder v3 Pro. Installed the Synapse 4 and I expected a way to customize the LED indicator found below the scroll wheel. I’ve seen screenshots of (i assume) previous Synapse versions where that was possible. I can’t find any way to do that though and the indicator is permanently turned off - it only lights up when changing DPI or turning the mouse on/off/plugging in charger. Was the option removed from the new Synapse or am I missing something?   

Since i lost my dongle, i used bluetooth but when i game and flick, it stutters and only moves a certain distancePLS HELP

Fresh out the box and the right click doesnt work 

 Hi, Does anybody know if the new Razer Basilisk V3 Pro  35K have the same rubber material on the side as the original Pro?  The rubber gets kinda gross after a while.  It seems like they went with just a textured plastic on the Basilisk Hyperspeed.  I was wondering if they did that across the entire line.

This started this morning, but my mouse is genuinely unusable and stuck in the top left. I’ve tried unplugging, cleaning, and restarting my PC. I also cannot click on anything on my PC to check for drivers updates. Pls help :( 

An USB from my Viper V3 HyperSpeed has broke and I need help with replacing it, is there any chance to do it?

That’s all I want. Three top buttons, 2 inset buttons, the mouse wheel with the side clicks, a button below the mouse to change profiles, and at least 9 easy to reach buttons for my thumb. Everyone makes mice lacking at least one thing I want. Most of the time they don’t have the third top button, just left and right click. Or they don’t have the two inset buttons by the left click. Or if they have all those then they only have 8 buttons easily reached with the thumb and this annoying slightly pointy plastic bump where the center button would be, and then two more buttons significantly far above them that’s hard to reach.I don’t care about a bajillion DPI, I don’t have a delicate touch, I don’t care about weight, I don’t have a delicate touch so shoving a heavier mouse around is fine, I don’t care if its wired, I outright prefer wired mice anyway, and if I had my way the *PERFECT* mouse would do all this and also be tilted some for that ergonomic-ness. So uh. Any chance they’re plannin

Hello everyone, i have a Viper V3 but i recently discovere that i didn’t have anymore pads under mouse due to overuse i guess. And was wondering if you have any recommandations of reference about that because unfortunately Razer don’t provide replacement for this type of piece. And also , i saw that they provide on top of the mouse and would like to know what if you put them if the mouse because sticky if they goes away ?

Hi, i have my viper ultimate mouse for around 2 years and i didnt had any trouble and suddenly i woke up this morning and it started to blinks a random color (Pc constantly announces to put it on charge) but at same time it says is on 80% battery and its like turning it offI Tried to uninstall drivers, update firmware, unplug etc and nothing has happened still doing the same 

Hello there. I recently purchased a RAZER Naga V2 Pro. Generally, I really like this device but there is one issue. I use the mouse in bluetooth mode for battery saving purposes. But every time the mouse awakes from sleep, for the first 2-3 seconds something strange happens with the scroll wheel. It either becomes very stiff and requires massive force to scroll, or alternatively there's absolutely no resistance when scrolling. After 2-3 seconds the scrolling settings are applied to the ones I set in Synapse. In other words, the movements of the mouse awaken it but the scrolling settings are applied with a delay. If I switch to 2.4 ghz mode, this problem goes away, but I would still like to use bluetooth to not charge as often. Basically, I could set the maximum sleep mode to 15 minutes but event that is sometimes not enough. It may seem like a trifle, but every time you step away from the computer and pick up the mouse, you experience these unpleasant feelings. Has anyone else encounte

The mouse had no issues playing CS:GO 4 hours ago. This problem arose some time after I entered Blender. After a little fiddling with the mouse it went back to normal. But now it's completely broken. Whenever I move the mouse it goes to the left corner. Can you help me on how to fix it?

Hello everyone, I’m facing a major problem with my Basilisk X Hyperspeed. The Bluetooth option abruptly stopped functioning and is unable to activate Bluetooth.Nothing happened when I turned the switch back to OFF and then back to BT mode. Not even the standard mode-switching button blinking blue. In BT mode, the LED remains black and does not blink. Tried to enter pairing mode with 4+5+mode combination—nothing. Changed 5 batteries—no changes. When you enter dongle mode, everything is alright and working perfectly. However, it does not go into pairing mode when you switch to Bluetooth mode, and the blue LED does not blink as it did previously. Every device I attempted to pair with had this problem. Paired mouse was deleted before any attempt to pair again. Attempting to press the left+mwheel+right button combination caused the blue led to blink quickly, and the mouse with the name "dfubasilisk" appeared among the devices that could be connected. However, this is not the default mode; a

czy istnieja makro na no recoill?

Hello, I need help with my wired Basilisk v3 mouse. Currently I play minecraft and I have a serious sensitivity problem. When I make "fast" movements with my eyesight while holding down my left click or right click (when I mine), my eyesight accelerates very quickly (faster than my movement) and this prevents me from being precise. I searched all razer synapse but I couldn't find the setting that causes this, nor in my computer settings. I decided to uninstall synapse but it didn't change anything. I need your advice, thank you in advance.

Hi, how are you doing? Hope youre fine.So, I’m trying to set up my Naga again and I want to change the side numbers to functions, and I’ve done that in the past. But now, only the numbers (1234567890-=) appear, and I’ve changed profiles and nothing happens. On the back of the mouse there is a yellow light and it doesnt change. The profile changer button still works fine tho.

brand new mice Naga when i conect work few min and than scroll wheel is turning of and starting lags in game?

I was wondering why the Razer Viper Ultimate v2 Pro doesn't come in a Quartz Pink edition and why there are no pink editions for the console and microphone products either? I have been using Razer products exclusively since the Quartz Pink edition was released, but now I am disappointed that there are no more high-quality pink products available. I need more pink.

Some years ago I had binded some the keys “K” and “V” to my Razer Viper Mini’s Mouse4 and Mouse5 buttons. Now, when I change those binds and turn Synapse off, they reset back to those old keybinds as if they are the factory settings. I have tried resetting from Synapse but it does not work. How can I change those binds and code new binds into the mouse’s memory?

在按清理过程修复过后（清理驱动固件等邮件提供工具），依旧存在设置HY按键模式后，在未按下HY开启按键时，鼠标始终处于HY模式中，例如无法切换滚轮模式而直接执行HY模式的宏功能。在重启电脑或者雷云软件后有一定概率恢复正常，也有可能不执行任何功能（既不切换滚轮模式，也不执行宏）。同时存在鼠标底部按键按下后无法切换配置文件的问题，在修复后有几率可以切换，但是指示灯始终为白色，即使执行的是红色的配置。在修复后尝试创作了很多新的配置文件，但是只要开启HY功能后，均会出现上述问题。 以上问题，在电脑处于锁定状态时，均不出现，可以正常切换配置，灯效也有切换，HY模式和普通模式均工作正常   Here is the translation of the content you provided, with a note that this is GPT's translation: After the cleaning process has been fixed (such as cleaning the driver firmware and other tools provided by the email), the issue still exists: when the HY key mode is set, the mouse remains in HY mode even without pressing the HY activation key. For example, the wheel mode cannot be switched and the macro function of HY mode is directly executed. After restarting the computer or using ThunderCloud software, it may return to normal with a certain probability, or it may not execute any function (neither switching the wheel mode nor executing the macro). There is also an issue where the mouse bo