Mice and Surfaces

8 months ago i bought the razer viper v2 pro after 5 months the mice started to not connect than all a sudden the dongle didn't connect i tried to connect one of the workers for replacement but didn't happen im still waiting for some help. anyone advice

Hi Guys I have just bought a V3 pro & im finding the right mouse button is too sensitive. Im playing PUBG & its making me accidently unscope my gun mid battle. Anyone else suffer from this or know how to sort this problem ?All help gratefully recieved :DThanks

My usb dongle stopped working on the mouse razer viper v2 pro

I bought a Razer Viper 2 Pro and a Hyperpolling wireless dongle today, but I don't know how to pair them, so I would like to know how to pair them.I tried the information on the web, but it didn't work.I don't even know why it can't be paired.

I have the Cyberpunk 2077 version of the Viper Ultimate.  It has firmware 1.06 installed currently.  I saw there was a firmware update version 1.07 available.When I run the update tool, it says my mouse needs the update & starts running.  It runs through one progress bar to 100%, plays a sound like the USB device is disconnected, & then gives a “get region information fail” message.What can be done to work around the error? 

Всем привет недавно у меня был переезд, во время которого я случайно потерял USB-адаптер. Есть ли возможность подключиться к другому адаптеру?

Just bought the Deathadder V3 Pro and went to plug it in, but there was no speedflex cable.Anybody know where it usually is in the box or if I am just missing it?

I just got the Viper V3 Pro and I'm just wondering if there is a way to charge it at night when your computer is on sleep mode because charging it by wire, keeps it on and its keeps my pc on. Both with the Razer wire provided and other wires that aren't connected to my pc it has this problem

Does the Viper V3 Pro have Motion Sync enabled on the 8K polling rate?

My Basilisk Ultimate wireless mouse is not charging whether I put it on my cleaned Razor dock or if I plug the mouse directly into the pc with the usb cable. My Synapse software says its charging with the flashing lightening bolt next to it but the percentage charge for the mouse never goes up. That number only goes down. I have done ALL THE THINGS recommended to try to fix the issue. Nothing is working. Drivers are updated. Tried to charge with the mouse turned off. restarted software, cleaned connections. updated everything I possible could on my PC. What the hell Razor.

I would love the poop out of this mouse as I suffer from RSI in my right hand and shoulder. I understand this may not be cost effective approach, but there are some like me who have a need for it.  Thanks for hearing me out. 

Razer Released Razer Viper Mini and Razer Deathadder V2 Mini before for their small hand fans, and now the release of their new flagship gaming mouse, why not make a small version of it… Razer When? :D

Hello everyoneI want to create a Trinity mouse with the numeric keypad and the number 2 with a macro that is saved directly on the mouse. Now I get this message: This mapping requires Synapse. However, I do not want to have the software installed on my PC. Unfortunately, I cannot test it either, as it is a function in the shop. As a macro, I want to create the key combination as follows on No. 2: CTRL - ALT- TCan someone help me or write how exactly the macro should look like.Thank you very much.Translated with DeepL.com (free version)

Will there be any rubber grips for the V3? Or will other Razer grips fit (partulary down the right hand side of the mouse).

Hi, im Peter and just lost the dongle for my pro click mini after going to a cafe. When searching for two hours review nothing, i decided to buy a replacement one but i couldnt find anyone selling it. 

Im gonna buy the razer viper v2 pro and i also want to use the 8k hz but idk if i need to buy a dongle because it loks like one is already with the mouse can somone hlep pls

Hey there, So my Basilisk V3 stopped working poroperly (it keeps turning on an off) and i was sure it is a hardware issue. So I got myself a new Basilisk V3 which cant be synchronised properly. The Lightning and most keys can be remapped as intended, however not button 5 and 6. I managed to get my old one running for a moment and its buttons worked just fine.I also relized that the device manager only labels the mouse as comfort mouse and not as Basilisk V3 as it did with my old one. I checked by turning off Synapse or using the mice with another device, apparently the internal storage seems to work, since i can use the remapped buttons on my laptop or my PC wihtout having Synapse running. Which makes me think this is a Software issue regarding Synapse. Has anyone experienced the same issue or found a solution? Kind Regards and thanks in advance

Hello to whoever is reading this, I recently bought myself a razer deathadder v3 pro faker edition and I’ve had a few problems with it. My first problem is that my scroll wheel makes some weird noises if I scroll a few times. I haven’t noticed any problems that contribute to this problem while gaming but if I spend $170 on a mouse I would most likely expect the scroll wheel to make normal scroll wheel sounds. My second problem is my mouse button. Specifically the left one. I feel like when I’m pressing down slightly so I don’t complete a full click I feel a “pre-click”. This so call pre-click in my scenario is a tactile bump when I’m slightly clicking down on my mouse. I hope someone is reading this and can support me cause I don’t know what to do. My friend said this was just the shape of the razer deathadder v3 and it was perfectly normal but I would like to make sure.

salam, happy eid al fitr, can we have g560 speaker to sync with balisik v3 fire color, using msi b760 edge , tx

my razer  mouse basilisk v3 does not  working after update new  version  of razer software, when plug  in usb keep connect and  disconnect,   what   problem is it? how to upload video at here

 Hello, my name is Ali, I live in Izmir of Turkey. I bought Razer DeathAdder V3 Pro but I cannot find Razer HyperPolling Wireless Dongle in Turkey, I am a youtuber but I need Razer HyperPolling Wireless Dongle, how will you help me?  my youtube 4  channel:   https://www.youtube.com/channel/UCNsaFMPQ_1_3ayjT3sjVThQhttps://www.youtube.com/results?search_query=cinaliworldhttps://www.youtube.com/@CinAliAnimehttps://www.youtube.com/@CinAliStar/videos

I have been using the Basilisk Ultimate for more than three years and I admit that it is a very good mouse and I love using it, but since 2023 I have this problem when using it: the mouse will suddenly disconnect and after 1-2 minutes it will reconnect to my computer, or it will not connect( This is manifested by the chroma light effect on the mouse suddenly going out, and the mouse cannot control the computer's cursor ), I need to turn the mouse back on or off or reseat the 2.4G receiver, and sometimes I can see the mouse displayed in the driver in synapse, but I can't control the mouse through synapse (at this time, synapse shows that the mouse battery is 0%). This happens almost every day, I've played a lot of games, I'm sure it's not a problem caused by the game program, and even the link breaks in daily use, I'm sure it has something to do with the latest driver of the mouse or synapse3, I hope to fix this problem sooner

Hello there, I was planning on buy the new Basilisk V3 Pro wireless mouse. I was wondering if there was a razer mat that charges the mouse while gaming, like the Logitech G Powerplay. If not, is it possible to use the Basilisk V3 Pro wireless mouse on the Logitech G Powerplay and will it charge?

So I was calibrating my mouse’s dpi to my brother laptop then suddenly my mouse was blinking white and the cursor wasn’t moving so check the battery it’s was at 45% but it the .the dongle ( I tried my brother’s mice’s dongle with receiver it was was working  with his mice(dongle) but not with mine(dongle)I also read some where that people’s dongles dying,  might’ve it  died on me can’t,  have use a wireless mouse wired now and what is the point  of buying a wireless mouse if it’s dongle dies suddenly,  and I’m out of warranty so can’t go back for a refund or exchange I used this mouse for a year and 4 months now if it could can get a replacement 

When my laptop turn off the screen, I try to turn on the screen by moving my mouse(Viper Ultimate), but nothing happened, I cannot weak-up the screen, and the mouse will stop working for 1 minutes. This happened only when the screen just turn off and I move the mouse (be more precise: when screen turn off, wait about 3 seconds, and move the mouse). The mouse will wait about 1 minutes and then start working. Also if I re-plug in the USB dongle, the mouse will start working immediatly.But if the computer has turn off the screen for a longer time, the mouse can work if I move it.When this bug happened, I check the Synapse about the status of the mouse. The Synapse can detect the mouse, but shows 0% battery, where I have just fully charge it.