Razer Synapse

hello. just bought razer ornata v3 x and using razer synapse ver. 20221214 to this day (2022.12.24) a i was using razer black widow x chroma i cant mark any single key (or group). allways marked is all keyboard keys. Ctrl mouse left button doesnt work too.

Hello guys, I need help about using Chroma on my Blackwidow V1. I'm using Synapse 3.0 and I'd like to set my keyboard completely red once I press the M1 key only and then get back to the original lights, just like if it was disabled and back to normal. How can I achieve that ? Hope you can help me!

Chroma SDK REST Server uses 1337 port, but I need it for local app development (I can’t change it). How do I set a different port without killing the process? Is there a way to re-config the default port? I was looking at this thread, but it is closed for further comments: Razer Insider | Forum - Change listening port of Chroma SDK. One of the comments said the Razer Chroma SDK Server is supposed to run on the 54235 port, but it is taken by NT Kernel & System on my machine. So I am guessing 1337 could be a fallback?

G'day all - just wondering if there is a list of products/vendors that directly tie into Chroma/Synapse without loading additional software. Is there such a thing? For example, I have GOVEE lights around my office that ties into Chroma but I need to load/launch the govee desktop software for Chroma to see it. I'm hoping to find products with direct compatibility. Thinking I'm in dreamland but thought I would ask :)

Hi, is there a way to add conditions to the lights ? What I'm trying to do is set up a key to be green while my mic is active and red while it's muted. I already have my key set to toggle the mic on/off, but I'd like to add a visual effect to it to be able to tell when it's on or not.

does razer chroma support aura sync or similar?

My main concern on the build is just connected to managing the RGB under one software and while I'd prefer iCue because I like the UI and customization. But while I was doing research, I came across things about workarounds because as I had already known that different rgb standards don't like to work together. Some of these work around included using adapters (as some have different pin connectors etc.) But I have also run across suggestions with SignalRGB as an all in one solution. However, I am not 100% certain the mobo is supported by SignalRGause I'm their main board list that ASRock boards are limited to "ASRock USB-Controlled Boards" and I am not 100% certain that particular board is USB-Controlled since I didn't see any documentation through ASRock on any of their boards that omegle support aRGB.

Just bought a used Chroma and I wanted to see it up with my MacBook Pro and eventually install bootcamp I cannot get it to work. I don't know if I'm doing something wrong or the thing is broken. Can you guys pass help me to find it out somehow? I connected it with the MacBook usb type c charger, also added an external monitor via HDMI and followed the steps that the YouTubers did, but no nice fancy RGB led lights light up. I think I can hear a little noise from the PSU from inside the chassis but it is very very quiet. I don't know if it is the psu not working or it is just so quiet. it charges my MacBook Pro though. Im trying to use it with an old AMD card (R9 270X) which supposed to be compatible with the system. PLEASSE HELP!! Thank YOU!!

I've contacted support and they gave me the classic restart, reinstall, re-enable runaround which did not help in the slightest. Basically, when I first got my razer gear, my keyboard, mouse, mat, speakers, headset all recognised I was playing Genshin Impact or Fortnite and would have their own premade profiles by either razer or the companies, however recently I've noticed that it doesn't work anymore. For example: using an anemo (wind) character in the game is supposed to make your keyboard and mouse a teal / blue green color to represent the character element and have light up effects for abilities etc. However this hasn't been working and I've tried everything in the Razer Synapse app, I've removed my profiles, tried to add the game to the profiles, removed it again, disabled and enabled Razer Chroma effects in the Chroma Connect section, Visualizer etc and nothing works. Anyone out there with the same issues, or did anyone have the same issues ome

I was able to link Vivaldi to Synapse, and I'm quite sure it should work since the keyboard and mouse changed color. But I'm stuck at WHITE. No matter what website I go, color is stuck at white. Anybody encountered this and has a fix? Please help!

i finally got the razer chroma connect to work, but not per key so I can't do my cool preset I made for myself. Is there a way to get per key setting with razer chroma on the omegle.2yu.co Everest Max?

Sunset colours

So I just got finished taking my monitor off of its stand so I could mount it on the wall. Once I was done and connected everything again I noticed that half of my bottom strip on my monitor doesn't light at all anymore. Tried different ports on the controller, tried changing its config in Synapse, and even the green detection flash that makes the entire strips light up green wouldn't work for the dark half of my broken strip. So it seems broken. I went to the website to look them up and I can't see them anywhere. What happened to them?

When I go on the Synapse app it says "Retiring". Seems dumb to get rid of one of the few things that actually work on the app?

Hi I been breaking my head on how to set up chroma on two RAZER RAPTOR 27- RZ39-0276 Monitors whenever I setup the lighting and use the same configuraion for all devices, one of the monitors does not pickup the lighting scheme along with the rest of the devices. The CHROMA studio only shows one monitor also. I will attach two pictures to help out a little on what I mean thank You .

Hello, I'm new to this, but after searching for chromas that run on LoL (displaying health, mana, etc.) I couldn't find exactly what I was looking for. I was wondering if there is any chromas where the user can customize each feature to be displayed on preferred keys and colors of our choosing? Or is there an official chroma made from Riot?

Hi, I've purchase recently the Razer Cynosa Lite keyboard, and i saw it can sync with Wallpaper Engine via Chroma SDK plugin, but when i'm trying to activate it or is white, or the colors are the opposite as the wallpaper. Maybe someone who can help me?

Hello, ive purchased razer ornata chroma v2 (awesome keyboard. but during warframe gameplay (supported game) i se keyboard effect from other players abilities. seems like a funny thing but nonstop blinking its pretty chaotic for me, so is there any solution for this or i just cant use warframe mode? p.s. im sorry for my english level

Hello guys, it has been a long time since I have posted my PyPeripheral project in Razer forum (The older links are : this and this). It had been almost 3 years ago that I have posted that thread and finished working on that project. However, I have came here today with another project named pyrgbdev. As you might have expected, this is a Python library that controls RGB devices easily. Personally, I had lots of difficulties with Razer Chroma SDK 3 years ago, and I would like to provide a bit of help to those who are looking into Razer Chroma SDK for their future projects with a Python library. As some might know, there 'is' a Official python library by official Razer (*omitted link), which they abandoned. Razer Chroma SDK supports REST API however they lack lots of features compared to C++ library. Thus I built this python library using cython so that it ca

Seeking help from Chroma wizards - I'm trying to make it so that when I press the number lock key (so when it's turned off), the whole number pad turns off with it. I've got it to work on just the number lock key but can't seem to get it to work on the whole number pad as when I try, they all turn on/off with every number that's pressed, I only want it to activate when NUM is pressed. I'm hoping there's a way.

Hello, I get the Razer Cynosa V2 and I am dissapotined. 1) When I press the FN key, only F9-F12 and pause-break key lit up. Not my others hypershift keys. 2) Can I do in the software something like when I press CTRL then everykey will shut off and only C and V key will lit up?

Hey guys, looking for a wizard that could help me connect my Katana to razer chroma.

is there a way to make my Cynosa and Basilisk retain the RGB Settings I have specified when I lock my desktop? I prefer to run my PC 24/7/365 and I just lock the windows session with WIN+L , but when I do, both devices revert to default Rainbow fading instead of the static Blue, that my entire desk operates on.

I have Chroma ARGB contoller and many fans, but half of fans are mirrored. Wave effect etc look like crap. Bit I don't feel like rotating them physically as wiring is optimal as is. I think a few weeks ago when I built similar setup in previous version of Chroma Studio when changing layout there WAS an option to rotate fans. Now I can only rotate LED strips, am trying for hours now.

Hello! I have an issue with Ambient Awareness in Synapse. I'm using it with Yeelight LED Screen Light Bar Pro YLTD003. When i try to use it it work fine, but the brightness of RGB light is very low. Don’t find any solution how can i change the brightness. Got any idea? Thanks!