Razer Synapse | Razer Insider
Skip to main content

Razer Synapse 3

-

  • 1,456 Threads
  • 6,317 Replies
1456 Threads
D
Dr_Fu444
posted in Razer Synapse 3
Is it possible to extend the range of Razer Nari Headset ?

Well, I was enjoying some good music and went to the kitchen to get fuel for my Apex/Code session, anyway the transceiver is great for the short distances but once the number of interferences increases i.e. brick & mortar or other signals [Wi Fi] it understandably causes connectivity failure. This song is quite good. Is it possible to configure the receiver on the headset to that it could possibly connect over your own wi-fi network which in general has greater coverage. I am unsure of the hardware specifications or what wireless technology was used for communication between the transceiver and headset. I am hoping it's some low powered wi-fi antenna, which gives me hope that by utilising some clever coding a VOIP connection or something to the same effect to stream audio to the headset over your home network. Can someone give me a bit more insight into what technologies were utilized developing this AMAZING headset?

1
BlackFireDragon
5 years ago
V
VividAmberparkhit579
posted in Razer Synapse 3
Synapse 3 and Mystic Light

Hello everyone, i use Synapse 3 and MSI Mystic Light. The sync of the Mainboard LEDs works fine when i play Razer Compatible Games like Apex Legends or the Razer Visualizer. But the settings from Chroma Studio are simplay ignored by the LEDs on the Mainboard. Mystic Light is on Versoin 3.50 and Synapse on newest Release.

0
V
5 years ago
N
Nayomaru
posted in Razer Synapse 3
Razer Synapse (Bug?) (Intended?)

Hello. First of all, I'd like to address this problem is this occurs to others or is it just me. I'd like this to be resolved for gamers if they have it as well. Because it disrupts gaming in general and doesn't make me enjoy it. Whenever I'm gaming (from time to time) razer synapse pops up this https://imgur.com/a/IUKuP1x it tabs my game out and stops my mouse from working for a good 3-5 seconds. Can't do anything about it. Tried a lot of ways to fix it, uninstalled synapse, restarted pc, updating it ...etc. The only way to stop this from occuring is to close razer synapse that is the frustrating part. Sadly, it's a big no for me since I use Razer Naga. What's the point of having it if I can't use the keybinds on the mouse. Hope you all understand my issue. Thanks in advance.

2
N
5 years ago
LKF_rzr
LKF_rzrInsider
posted in Razer Synapse 3
New razer update

Ives seen/heard at least 20 people have this problem... After the new update the app isnt letting people sign in. Its stuck on the loading screen... Ive tried everything from uninstalling and reinstalling (twice) to using the repair option... Still no use ITS FRUSTRATING

24
Surf
Vanguard
5 years ago
K
KetaKittyInsider Mini
posted in Razer Synapse 3
Blackwidow Elite: How can I use hypershift (FN) with F1-F8 keys?

Hi, i think the better question would be: Why am I not allowed to set an secondary function with the FN key in combination with the F1 - F8 keys in synapse, like with nearly every other key on the keyboard? ... I understand why im not able to change the hypershift-function of the F9 - F12 keys, cause its already in use, but I really don't understand it for the F1 - F8 keys. can someone pls explain? thank you very much (sorry for the bad english, not a nativ)

1
K
5 years ago
A
antetheman
posted in Razer Synapse 3
Synapse 2.0 Tilting scrollwheel sensitivity ??

Hello, I just bought Razer Naga Trinity... I can't get my scrollwheel to function properly... When I tilt the scrollwheel right/left it just moves the page a tiny bit, but it does't keep scrolling...I have to press/tilt it multiple times, then it moves (but only small bits at a time). And in the Synapse control window, there is no function on the sensitivity for the tilting action...only the actual tilting action itself... Anyone with the same problem ? Solution ? I have reached out to Razer but only (so far) got back that I should try using another USB port, and unplugg/replug the USB cable. With no result for me...

0
A
5 years ago
R
Redzebrax
posted in Razer Synapse 3
Razer why ?

Always being a fan of Razer, 4th mouse ( y they don't last long due to some technical issues which are most of the time easy to overcome, but i like the response and ease to use when they working correctly) and thought this time i buy an extra Razer mat for nice pairing the visual effect's Oh yeah i bought also 3 kraken 7.1 headphones before (2 for the kids). But what the hell are you doing with your drivers? I can follow that you want a new interface and change the underlying drivers to explore new features. What i can't follow is the crap solution and stupid excuses you are providing for pushing the 3.0 beta not integrating your old 2.0 drivers. Sry this was the last time i buy from you and this with pain in my hart.

0
R
5 years ago
E
Ellyll
posted in Razer Synapse 3
Syanpse Update STEALS FOCUS

Seriously, wtf happened, Razer? Your new synapse software was obviously designed by a social media team with no gaming experience. The UI is unintuitive and split up in a million tabs that seem to be primarily concerned with data mining. The macro builder is a joke and obviously was not programmed by a gamer - just doing something as simple as having one button depress a key and another release it requires text editing the XML import files. And then, to top it off, on a driver that is supposed to be for GAMERS the fricking update STEALS FOCUS from the game I am playing to tell me its important to update my data mining app... How the hell did this make it through QA? Stealing focus from a game you are playing at a critical moment is so bad, I do not think ANY other HID manufacturer has EVER made this mistake in the entire history of PC drivers. Ever. What the hell is going on, guys?

0
E
5 years ago
C
cheryl_andrew
posted in Razer Synapse 3
Synapse 2.0 couldn’t detect Mamba + Firefly Hyperflux on Mac

i just bought Mamba + Firefly Hyperflux wireless mouse for my iMac, unfortunately Synapse 2.0 couldn’t detect my new mouse. mouse works, but couldn’t make any adjustment please help btw my Mac running on Mojave

3
C
5 years ago
M
MZN500
posted in Razer Synapse 3
Error with Synapse, DeathAdder Elite and Cynosa Chroma

Hello together, since last friday, I am a happy owner of the DeathAdder Elite and Cynosa Chroma. After plugging them into my laptop (ThinkPad), my Windows 10 automatically installed the Synapse Software. The download took a few minutes, so I could used both devices without the Synapse software and without any problems. After the installation and first start of the software, the mouse and keyboard started to be mad. Every minute, both devices freezed on the screen and disconnected / connected to the laptop. After closing the Synapse software, it worked normally again. Does anybody know this problem?

1
R
5 years ago
H
Hugogcosta
posted in Razer Synapse 3
Updated razer central black screen

st updated razer central, as it opens it doesn't get pass this....tried reinstalling, repair option nothing works.......I just get this black screen on the razer central prior to supposedly log in

2
H
5 years ago
P
polyJungleGreenammo299
posted in Razer Synapse 3
Problems for razer synapse 2.0

Razer synapse был выключен и включен спонтанно.Это происходит, когда мышь razer abyssus 2014 подключена к компьютеру.Но когда компьютер подключен к другой мыши razer abyssus 2000, никаких проблем не возникает.Стоит последняя версия Razer synapse. мышь цела, провод не сломан, проверены все порты УСБ, весь прошлый год мышь работала правильно. Проблемы начались месяц-два назад.Переустановить драйвер, не помогло.Мне нужна помощь.

0
P
5 years ago
M
maczook
posted in Razer Synapse 3
Ability To "Test" a product in Synapse before buying hardware

I feel a great feature you all at Razer could add to synapse would be the ability to "test" a product before buying the hardware; I feel by adding that to your software it would give people a chance to build macros or lighting profiles for a piece of hardware they may not have yet, and most likely would result in more sales because then people would want to buy it :) Just my 2 cents :)

1
BlackFireDragon
5 years ago
R
Robo109
posted in Razer Synapse 3
RB15 Don't Know How To Stop Keyboard Lights From Changing In Game

Hi, I have a rb15 and was wondering how I stop the keyboard lights from changing when I turn on games. I just want to keep the lighing effects I created.

8
BlackFireDragon
5 years ago
B
baseDarkOrchidauto782
posted in Razer Synapse 3
Toggle Multiple Macros

Is there a way I can set a single key to toggle on/off multiple macros? e.g. to manage multiple cooldowns with different cooldown timer lengths.

0
B
5 years ago
S
SiSavage
posted in Razer Synapse 3
Synapse 2.0 doesn't detect allowed accessibilities on Mac

First, I'm French so sorry for my bad English. So I just bought a Razer Kraken Tournament, so I want to install Razer Synapse 2.0 because I'm on Mac. I installed it and it asked me to allow accessibility access for RzDeviceEngine but it doesn't appear. So I allowed "Razer Synapse" and the application doesn't do anything Edit : Cauz of this I can't use the appli

0
S
5 years ago
M
maczook
posted in Razer Synapse 3
Switch profiles by holding/releasing keys

I hit up support about this, and I would love to see it added as a feature: Suppose that you want your keyboard to change colors based on what key you have held down, i.e. If you hold control, or control + alt, or control + shift+ alt, etc., your keyboard would change to a different profile, and upon releasing said keys, it would change back to your original profile. This can be useful if you are using a program with a ton of key-commands, and would like to see what options you have available when holding a specific set of modifiers, i.e. only the keys you can press to do something will light up i.e., when holding control + alt, "p", "e", and "u" light up Also, it would be nice for knowing that you are in caps lock/num lock mode; if you hit the caps/num lock button, then your whole keyboard changes color until you hit caps/num lock again, and then it will return to your original profile iCue has a feature that allows you to set up a profile changes based on what key you press, an

0
M
5 years ago
V
VikingVoyager
posted in Razer Synapse 3
FEATURE REQUEST: Notes

I would like to be able to make notes with my keymaps. Sometimes it may be a while between use of apps and I can forget what shortcuts are what. If I could make notes for each key, it would be easy to recall what that key was used for. Also, It would be great if I could export a pdf of my keymap layouts with these notes, so that I can have a printable reference for easy review.

0
V
5 years ago
V
VikingVoyager
posted in Razer Synapse 3
FEATURE REQUEST: Longer Names

I would like to be able to use longer profile names and macro names, rather than being limited in number of characters permitted.

0
V
5 years ago
A
aeroUltraRedpark127
posted in Razer Synapse 3
Synapse keeps restarting lights on keyboard

Hi all Hope someone has a solution to a new problem i have with my Razer Blackwidow Chroma and Synapse 3. When Synapse is loaded, the color setup of the keyboard seems like it keeps restarting with a few seconds interval. So the keyboard light turns off for a second and then the keyboard starts whatever light i have setup again and again. It just started happening recently and i am unsure what triggered it. If i "Kill" Synapse program the keyboard goes into default color cycle without the constant restart. So it seems software related. I have tried uninstalling Synapse and reinstalling. But when Synapse is loaded the problem returns. It does not matter what lightning effect i set up in Synapse. Still the same turn-off-light-and-restart-effect constantly happens. I am running latest version of Synapse (3.4.115.10915) and also running an up-to-date Windows 10 Enterprise ver. 1809. I have tried different usb-ports with no change. Anyone else experienced this, and have an idea what

6
Z
5 years ago
W
WidowMaker1337
posted in Razer Synapse 3
Razer Synapse keeps showing me "What's new" at start up

I have the 2018 Razer Blade 15 Advance Model. My Razer Synapse was just recently upgraded to a newer version 3.4.331.3119. Now ever time I reboot my PC , the new "What's New" keep popping up at start up. Before the upgrade the Razer Synapse would just load but stay minimized in the system tray. I check the settings and I have the check box checked for "Minimize to system tray at startup". Is anyone else having this issue? Thank you!

9
J
5 years ago
Grimmwor
Grimmwor
posted in Razer Synapse 3
Razer Blade Pro 2017 - Tournament Driver

Please log this as a suggestion box comment. Create a Tournament Synapse 3 Driver for your Legacy hardware, the 2017 Razer Blade Pro (USD$4K) OR 2) Publish a Tournament Driver for 2017 razer blade pro that simply allows you to select an static rgb color for the keyboard and does nothing else Thanks.

0
Grimmwor
5 years ago
A
Anshies
posted in Razer Synapse 3
Synapse 3 doesn't detect BlackWidow Chroma V2 and Mamba Elite after two updates

Hello, since the last update (I guess it was about two weeks ago), my Synapse 3 stopped detecting my keyboard BlackWidow Chroma v2 and my mouse Mamba Elite. Everything was working fine and I had no issue with it until I updated the app. Today it updated again to version 3.4.215 and I thought that would solve the problem, but it didn't. I tried to do everything listed at the forums and reddit, like unplugging the devices, restarting, restore the application, uninstalling, uninstall and update drivers from device manager, etc... But nothing worked for me. I have Windows 7 Home Premium, but I don't think that's the problem because two updates ago everything worked fine. I don't know how to fix this and I'm really annoyed for not having my lights in sync /: (?) Thanks in advance!

6
BlackFireDragon
5 years ago
A
AMBERcoolBisque874
posted in Razer Synapse 3
Keyboard + mouse button combo

To draw a measurement with the software we use (a radiology system called, ironically, Synapse) you hold down the R key and drag with the left mouse button. Our radiologists would prefer program a mouse button to click and drag. I searched the forums and could not find a post that explains how to do that. I'd like to know where that post is or how to do it.

0
A
5 years ago
D
Davidier
posted in Razer Synapse 3
Razer Synpase 3: Chroma devices "restarts" itself every few minutes

It really isn't that big of an issue but it is kind of persistent and annoying: all my lighting resets itself and my audio sort of restarts, like a Windows Audio service restart that lasts a millisecond. Anyone have any idea how to fix this? Thanks

5
BlackFireDragon
5 years ago

Badges

View More
CookiesCookie settings