Razer Synapse 3

when using Streamdeck XL it becomes very Laggy and often fails to open folders.. but only when Synapses is running...when Closing synapses it fixes it completelyi dont want to close synapses because of RGB and macros but i dont know if its on razers end so i left a bug report both here and on Elgato SDK support pages

As title says, it doesn’t change profile even if PUBG is selected. I was reading that the reason of this not working was the fact that Synapse takes the first .exe file available, and for PUBG is “ExecPubg.exe” and not “TslGame.exe” or “TslGame_BE.exe”. If I go to link the .exe myself, it won’t select it. Is there a solution?

So i had this issue today when reinstalling Synapse 3.0 and no matter what steps i took to disable my FW, Antivirus, remove drivers, etc. - none of it worked. As a last ditch resort to remove my internet connection from the equation - i disabled my LAN connection from my STARLINK internet service and connected to my cell phone's hot spot to try the installer again. VOILA - the install fired right up and worked flawlessly. There is definitely something with STARLINK's service that prevents the installer from working. What exactly that is, i dont know - but at least now I know where the problem resides! It's likely due to the fact that our routers dont connect directly to the internet and as such - there's some PnP or other NAT issues at play (also why i occasionally have problems playing online games).

The wave effect speed is much slower (at least 50-75%) when Chroma Visualizer is enabled. Is there a way to speed it to the same as the default speed when just controlling a device through Synapse?

I attempted to use Chroma Visualizer in Synapse 3 to sync all of my devices (including Legacy - Mug Holder) and noticed an issue with my Aether Monitor Light Bar. The ability to toggle the White Light is disabled and therefore I cannot turn it on or off. This only relates to Chroma Visualizer and works as it should when the visualizer app is off.Will this be fixed anytime soon?I am delaying moving to Synapse 4 until all of my Synapse 3 devices are listed as being supported (Seiren V3 Chroma and Base Station V1 Chroma are the remaining two to be added). Although I couldn’t find any info if Synapse 4 fixes this issue.Thanks for any help given. 

I need to use Synapse 2.0 in order to my Razer Serval controller work, but i can`t pass the log in phase cause even disabling IPV6 and fully disabling firewall did not work, what should I do?

Hi all, I've had the synapse application installed for the last 2.5 years and during that time the automatic switching of keybind at game start has worked for maybe 4-5 months in total. I almosta always have to manually select the profile. Now, since this is not a new application, there must be an identified way to get this to work more systematically. Any ideas? Is there a list of preconditions, a correct way to set this up or is this one of the most instable softwares there are out there? Thanks

Hello, many people have a mixer tab in synapse 3 and synapse 4I don't have that tab. What can I do with this ? Example of the tab on the photo 

This has been posted before but I feel like it needs to be overstated.PLEASE make a toggle-able option to disable local-dimming for single-zone brightness.its the best… and worst feature of this laptop.websites with large sections of dark and white content look weird when scrolling. White surrounded by black is dimmed if small enough. I can’t see how anyone is going to use this for photo, film, graphic or other professional work outside of connecting an external display.other Mini-LED laptops have this option. I managed to get a massive deal on this laptop.i had the 4080 version and loved it but sprung for this one. Now I can’t go back because the model I bought is no longer open box. I almost liked that one better. It ran cooler, could be used for work. 1440p 240hz. What do I do? Go full Blade 18” and get the 4090 and the non-local-dimmed display?the 4090 version is perfect. I love the 1080/240hz modes. 4k is beautiful. But the local dimmin

Hi, worked fine in Synapse 3 but new Beta broke it? Keyboard Function - Key recording - Enable Turbo - Not working in game? Game: FFXIVNot repeating the key at all while key is held. 

I contacted support and couldn't find a place for suggestions for the new Razer Synapse (I uninstalled it but I know I can do it by pressing "F1" inside the app).I have been using macros for many years, I understand how it works and I want to make a suggestion. I believe that the previous model was more practical in some things and worse in others. The app clearly responds better, but the macro is slower. If you want to do the test I did to find out, it's simple: F1 (0ms)[LOOP 11x]A (0ms)B (0ms)C (0ms)D (0ms)[LOOP 11x] This loop mechanism was the one I migrated everything to Razer from, simple but efficient for certain functions. This 0ms is a fake number because even with 0 it is obvious that there is still some delay. In the old Razer Synapse 3 this delay was even smaller, but now Razer Synapse Beta makes the delay "0" longer, which is detrimental to some operations that need to be as fast as po

I am using Razer Synapse 3 with my Razer Tartarus Pro, and I would like to assign two different macros to the same key. Specifically, I want to trigger one macro with a half-press and another macro with a full-press using the analog input feature of the Tartarus Pro.However, I’m unable to find a way to assign two macros to the same key. Is there a way to accomplish this using the current version of Synapse 3? If not, could you please advise on any possible workarounds or confirm if this feature is supported?

 Best software ever! Seriously, I've never had so many problems with a program like this. Countless reinstallations, removal of leftover drivers, and constant reboots. Nothing is working at the moment. Congratulations, really!

Every time I go away from the Blade 15 and so it goes to lock screen, and then when it goes to sleep when I remain away even a little bit longer (because anyway Synapse prevents the PC to go directly to sleep, but that is another problem, one among so many more), while Synapse appears to still be active (present in the notification area) when I wake it up, it is in fact totally unresponsive, all device profiles are disabled as well as all the lighting (back to cycling spectrum default). This happens with connected devices (Naga V2 Pro and DeathStalker V2 Pro TKL) as well as with the Blade alone, with no devices connected. Honestly Razer, what the hell?  We are speaking about the software which is at the core of your ecosystem, which isn't only supposed to manage lighting, that would be a little bit less damaging if that was the case, but also to work as a driver for all kind of functions, from the system itsel

Hi all! Recently I switched to Razer products again and now there is a problem with their program. Only Synapse 3 does not start. All other programs from this company work. I can't change the color or change the mouse speed - nothing.... There were no such problems in the previous version. Can someone tell me where I can download the previous version or how to fix this problem? The instructions on the website don't help.   

wane save it on memory card so i can us it on my playstation 5 my maccro works but nt custom keys

Synapse beta and Nagra pro/and dock not recognized. Legacy keyboard is recognized.While installing Synapse beta (Win 10) installation recognized Nagra Pro, Charging dock, and legacy keyboard. After rebooting as final step to install software only recognizes the keyboard. Help, please.  

Hello,Synapse is making me crazy. Tried to use account to synchronize my profiles between 2 PCs and 2 mice. But I got lot of issues (loosing profiles, new default profiles created, etc...). So I gave up and return to an invite account on synapse and use import/export functionnality. But at the moment the import/export feature does not work anymore !!!! When I click on the button nothing happen !!! Synapse is broken ?

Good afternoon,I had to break a Razer Blackwidow V3 out of storage to work on my BIOS after a CPU upgrade (long story) and remembered why I liked Razer’s hardware so much.  The keyboard had a really robust feel and, even though it’s years old at this point and been in disuse for some time, like all Razer’s peripherals I’ve owned, been excellent to use.  The lone exception was that the Orbweaver I used didn’t have an analog joystick and the palm pad slid off.  I did break it out for nostalgia’s sake and, lo and behold, still works like I bought it yesterday besides my hand resting on bare plastic.Then I thought about why I switched to Steelseries peripherals given I’m probably a little less sure about their hardware (recently had to replace their rather expensive mouse because their scroll wheel started to fail), and I remembered that Synapse was very ungainly, ate a not-insignificant amount of my active system resources just by existing, and had a habit of as

Hi, I believe that this might have been requested a few times… but probably not to the extent of a full explanation of how to implement the feature.I believe that for the sake of ease of use and customer satisfaction that when the [FN] or Hypershift key is held it will change to a defined chroma profile.The way in which this could be implemented is once the profile has been created the user can simply go into the profiles tab and select a Standard profile and Hypershift Profile for each game they wish tto use it for. The Hypershift profile will already be linked to the game by default as it already is, but the user would be able to select the “Chroma Studio” option in the list and then under the “Linked Games” section would be the option of choosing the “Hypershift Lighting Profile” as a dropdown list from the existing profiles. The default would be the same as the “Chroma Effect” selected. Once the user chooses a different option from the dropdown list it will force t

hello , after i formated my pc i cant load synapse , any way i can fix it? 

I cant seem to make this go away, and every setting i change seem to make no difference, i cannot hear a single difference in the sound since this happend i cant turn on THX spartial i cant change equalizer i cant do anything to my headset anymore, How do i fix this as its driving me insane. 

I downloaded the minimum amount of software driver programs yet there seems to be so many side applications running using what I believe to be an unnecessary amount of system resources. It’s stopping me from downloading Axon and Cortex because I can’t imagine running more than double what is now. Is it just me or is this a common issue?

Can you at least add some option to disable lights? How am I supposed to disable them without a working app for Sonoma 14.4?Is it so costly and time consuming to develop at least an app with such simple functions? What situation are you in that you are throwing away support for all your customers on MacOS?

So had a weird problem yesterday. On boot up razer central notified me of an update in progress to synapse, saw the pop up with progress running. Didn't pay much attention, box went away while it as browsing the web, no games or major software running. A short time later I noticed all my aRGBs were running an a random default colors. Figured I just needed to select the profile again, no big deal. But none of the razer aps were on my task bar, and when I went to look through my start menu and apps, no software was found. Folders still existed but nothing could run except central, and when I went to it's app page it showed every other razer software with the only option being "install" Haven't gone in to see if any of my profiles exist after the fact, my modules for controlling other brands were gone and at that point it was late. Any advice on why/how? How to I prevent this from happening again?