Razer Synapse

Hello i have Synapse 4 installed. I have 3 Profiles Basic LOL and POE2 they are backup in the cloud and everything. All was good until the other day when my POE2 profile didnt work properly. Its show in the selection menu but when i go to make changes to it. doesnt change anything also the game that is link to it cannot be unselected. So i did what everyone would do i deleted the profile. That obviously didnt fix anything. No the profile is gone i can make a new one but the game that was linked to it still shows as selected so the new profile i made can be use with this game because still show that is link to the old one. I have reinstalled the software try clearing the drivers, No success so far.  Thank you . Have a great day 

Just bought a Blackshark V3 headset and wanted to test out the THX Game Profiles for Battlefield 6. They posted on Razer official facebook page that it was added in October 2nd. I can’t activate it. I checked several posts on reddit and V3 owners have the same issue while the older headphones are working fine with the THX profile. This is false advertising and I want to ask ,what are you waiting for RAZER TO ADD IT FOR YOUR NEW HEADSETS!!! THEY WON’T FIX UNTIL ENOUGH PEOPLE COMPLAIN ON SOCIAL MEDIA. What incompetence!! 

aether monıtor lıght bar Let's connect this to synapse 4. Can anyone help? 

Hi, I have a custom scroll profile for my Naga V2 Pro mouse. I also have browser detection on. I noticed the scroll profile does not go back to my custom profile when I come from a browser window but the default values for the custom profile are used. Does anyone else experience this?This is with Synapse 4

I’ve used the Razer skill to set up lighting routines for a couple years.  It suddenly stop working in Synapse3.  Went through the steps of reconnecting the amazon and razer accounts, and it completes as usual but the skill never enables in Alexa.  Installed Synapse4 with same results.

I have a Deathstalker Pro. Using it with default keybinds is fine. For programs that make the distinction between Enter and Num-Enter, it works as intended.However, if I want to re-program a key or mouse button to ‘Enter’ in Synapse 4, the software will always recognise it as ‘Num-Enter’. Input: EnterOutput: Num-EnterThis isn’t my area of expertise, but I believe Enter and Num-Enter share a code, and therefore the distinction has to be made by a secondary parameter. Or maybe you need to sacrifice a lamb to an old Macintosh? I don’t programming.  Considering how commonplace the distinction is in software, this severely limits the usability of programmable keys..QUESTION: Does anyone have a workaround? Is this something that could be solved reasonably easily?

Hey all, Synapse 4 was working perfectly fine until I decided to give it a refresh by closing it from the system tray. I relaunched it, it automatically updated, and now my laptop (Razer Blade 16 2025) is not being detected. It’s listed as ‘disconnected’ under connected devices.I have uninstalled it, repaired it, performed a windows update, and rebooted my laptop multiple times to no avail.  It seems like a random update to synapse caused this issue, since it was working perfectly fine until I restarted synapse. I use synapse for smart battery charging, etc, so I am kind of reliant on it working properly.  Coming here to see if anyone else is experiencing this issue. 

After 6 months of the preview, I have uninstalled the application on macOS. Below is a list of continued issues (that have been reported numerous times on this forum) with no resolution. Application does not run in the system tray. While there is a system tray icon for Synapse, if you “Quit” (CMD+Q) Synapse, to get rid of the window, the system tray icon (and thus background process) quits. If the window is closed, then it should disappear from the “ALT-TAB” window listing and run like every other macOS app that has a system tray icon. Razer Naga V2 Support The only way my custom keybinds work is to close the synapse app compltelty. When open, my side buttons do not execute the action assigned in the profile. So in order to modify and test it I need to open syanpse, modify the profile, quit Synapse, test the key bind. Keys sticking Of you alt tab out of your current application while also pressing a customized key, (such as on my mouse I have NUM1 assigned to repeat), synapse will co

I created a new profile, but when I try to log in, I get the text error "Emily 401." The app just takes forever to load.Can you tell me what the problem is?

Using the most up to date version of Synapse 4 and have Huntsman V3 TKL and Blackwidow V4 75%. Here’s the issue I’m encountering:When I first plug in each of the keyboards, Synapse 4 shows the usual thing of the firmware getting installed and a Windows notification to restart which is perfectly fine and normal.  However after that whenever I disconnect one keyboard and plug in the other, I get a Windows notification again that a restart is needed, which should not be happening.  On top of that if I don’t restart the computer, whenever I use the volume wheel, instead of the volume going up or down it scrolls the webpage up and down instead. 

Hello all, After recently upgrading to Razer Synapse 4, I noticed that the audio quality of my Razer Kraken Ultimate headset has been completely ruined. The audio levels get to an abnormally high level to the point where the audio crackles and cuts out to a really quiet level before quickly raising its own volume and repeating the process. Raising or lowering Windows volume has no effect, the volume stays constant. After some digging, I discovered that the “Device Default Effects” setting in Windows Audio Settings were the culprit. However, by turning the effects off, it completely disables all the features that Synapse offers (I personally use a custom EQ for my headset, turning this off disables the EQ).  I tried going back to Synapse 3 to see if it fixed the issue. The issue was temporarily fixed until I opened a game. My volume became abnormally loud and everything started crackling and cutting out.  Does anyone know what is truly happening or have a fix for this? Or is this a prob

After update to Synapse 4, Blackwidow Elite Media Keys RGB are not fully light up. When I exit from Synapse, media keys RGB are fully light up again.  Synapse 4 Active: Synapse 4 disabled:  Please help.

Hello to all When i first used My Razer Basilisk V3 i installed Chroma RGB app and Synaps 3...Going into Chroma RGB i could simply  select the RGB effect and change  the speed or colours …I never had Razer updates or anything it was awesome… i reinstall windows  and Chroma RGB app and Synaps 4..I opened the   Chroma RGB app the simple settings are gone i now have to use the Chroma RGB Studio app..Even after following the tutorial video i can’t get the effect  to work why Razer made things worse i don’t know..Can i get the older version of Chroma RGB APP back ?? because i rather go back to the very easy simple settings Of  the older chroma RGB app and i do not want to be forced to use studio….

I have purchased the Razer Freyja haptic gaming cushion and am trying to use for Sim racing. I have Simhub but cant see the Freyja when I try and add a new device. I have it connected, on and have the Razer Synapse app aswell. No idea how to connect it.

Hello,I’m using Razer Synapse 4.0.86 and Razer Chroma 4.0.63. I have Deathadder V2, Firefly V2 and Ornata Chroma. I have a strange (and annoying) behaviour, every time the system reboots automatically (for example to apply Windows Update patches, after a blue screen, ecc….) the Chroma lights on every Razer device are off before the login. After I login to the machine, the lights turn on after a while when the user profile starts loading. This does not happen if I manually reboot the system, the lights are on even before the login.Anyone else with the same issue ?It seems something is not restored correctly before the user log in.

Hello, could you please tell me if support for the THX Competitive mode is planned for the game Arena Breakout: Infinite?

im on firmware 1.0.2.0 and my sidetone has a really annoying delay and it sounds badhas anyone found a fix?ive tried things other people tried on different headsets but nothing worked

So I can’t get my Razer naga V2 pro to show up on my synapse for MAC despite being on the supported items list. is this a common issue, or is there something commonly missed in dealing with synapse for macos? 

Hello. I bought the Kraken V4 X headset. Now I've set everything up and THX spatial audio is working fine, but when I look in BF6 and in the app, I can only select Stereo or THX spatial audio as my profile.But BF6 has other profiles. How can I activate them?

Hello I have a 31-inch screen Weight 16 lbs Does it match Razer Monitor Stand Chroma

I am using the Razer Blackwidow V4 low-profile TKL keyboard and the Synapse 4 software. When I try to allocate the hypershift-function to a custom key the hypershift option does not appear (I have seen videos on YouTube with other keyboard, where the hypershift option (arrow) appears when clicking on a custom key). So right now, the only way to activate Hypershift is the FN key, which is too far away for my purposes. I want to use the CapsLock key to trigger hypershift. Can we expect to get this functionality in future Synapse and/or keyboard firmware updates? This is actually an essential function I need to have using this keyboard.

Hypershift still does not work on Synapse 4 for my Deathadder V3 pro. It does work on my Huntsman kayboard. The only way to make it work on my mouse is to close down synapse completely then it starts to work again. I’ve been reporting this for around a year now please get it sorted or I will be forced to switch eco systems where I know the features I need work properly.

The THX Game Profiles just don’t work at all, first there’s no games or apps recognized automatically, second when I try to add a executable and confirm it literally does nothing a the list continues empty, I just upgraded to windows 11 and the issue also happened in windows 10, so reinstalling synapse don’t work, pls help

How to close a topic or Mark a question as solved?