I am aware that razer has dropped support for surround and is using the new 7.1 on synapse 3, but I personally really dislike how it sounds and I want the calibration and customization available on Surround, however my pro code is being rejected on it yet it's working on 7.1. Is razer stopping people from using their codes on Surround?
ciao a tutti . i am new here and i am a fresh owner of a blade rtx. once i enter in windows 10 the pc ask me to register/connect (if i am already registered) into Synapse software.what i want to ask is : - can i use the same user and password of my Razer id or must i use a totally new user and password? ciao again,thank you very much in advance and...."no green = no life!"..:)
For a long time now (about 3 months) i got a lot of problems with the razer synapse 3 software. First of all it is afully slow! Than it often leaves my systems dark and unlitten an if I try to make new profiles it always freezes and crashes. Does anyone have the same problems or had them solved? Becuase, as we all know, the suport of razer is pretty sh*t.
title pretty much says it all just calling it synapse 4 for now so people dont think im on about synapse 3 or 2 instead of “the new razer syanpse beta” but ARGB controller works with visualiser but says not installed retry on the dashboard so no custom customisation or anything just visualiser making it work or just leave it cycling and the kraken v3 pro just wont show up...not expecting miracles as still in beta so ofc there are bugs and this probably one any tips tricks or solutions will be appreciated if not throwing this out there to anyone thats trying it for the first time
Hello everyone. I'm new here and I'm still learning how to use Synapse, but I believe I found a problem. I make illustrations and Manga and won a Razer Tartarus V2 to use its programmable buttons for my work. The program has an option that automatically switches the profile when you open the chosen game / program, but for some reason it doesn't work properly and that's where the problem is. Sometimes it switches correctly, sometimes it doesn't and sometimes it even chooses the wrong profile. At the moment, I'm changing profiles manually via a button programmed for this, but I would like to have this function working. Does anyone know how to proceed or could this be a bug?
Hello everyone ,this is my first time posting and it is due to a weird issue I experienced during the last synapse update as everything was working perfect before hand. Whenever I have synapse running and in game, my 2nd 1080 will drop to around 50% usage while the first 1080 stays at full load, not only does this cause a noticeable frame rate drop, but it seems that it is still trying to run in SLI so frame times skyrocket, artifacts appear and every game that actually supports SLI becomes completely unplayable(SLI issues? whaaaaaat?). As soon as I disable synapse, in game or not, my usage and frame rates both go back up. Its not that massive of an issue because everything still works, I am just unable to control the chroma portion of my setup. I may be wrong in this assumption, but it seems to me that the issue arose as soon as the screen awareness option was implemented. Rolling back nvidia drivers did not solve the issue so I resorted to rolling back the synapse and it works but I
Ok, sorry if this has been asked before; I looked and couldn't find it. Is there any way to link a profile to a Windows 10 login? For example, one color setting for me and a different one for someone else with the setting changing automatically based on who is logged in. Thanks
I'm running version 3.5.331 of Synapse, the latest. I have a triple monitor setup, my game is running on the Monitor 1, as identified in Windows 10. I've created a recorded macro with mouse movement, the recording goes well and everything appears as it should. But playback is a mess of improper mouse movement. When playing back the macro the mouse movement occurs on another screen, always the left most screen. Regardless of the Mouse Movement Tracking options I use the playback is always on the wrong monitor. EDIT: Upon further review, looking at the Mouse Movement Preview feature on the recorded macro, the visual preview which shows the position and movement of the mouse is totally incorrect. When recorded my mouse position is on the right hand side of my active application window, but the preview shows the position on the left side.
For the more utility focused macros, it'd be great if we could insert events like launching programs, changing profiles, or any of the windows shortcuts, basically everything already in key assignments, into macros, as of right now it's only keypresses, text inputs, and commands.
Hi there, guys! Lately I've been struggling with a problem that pissed me so much that I was closely going to get crazy. As some of you started threads about this problem, the fact that sometimes apps don't show in the THX Spatial Sound Mixer and don't let you modify the output to "surround" or something else is very anoying. Folks here replied that a system restore solved their problems, but that's a painful method for some users because they don't want to do any changes to the OS. That was my intention, too. So, not making it any longer, with the headphones connected to the PC, I opened device manager, I went to "Audio inputs and outputs" and I uninstalled every output device from Razer (I own a pair of Razer Nari Essential, so I uninstalled all "Razer Nari Essential" and all "THX Spatial - Synapse", as shown in the photo), I unplugged the USB Adapter (if you have wired headphones, I think you should just unplug the headphones) and I connected it again to the computer. After that, wh
I'm running Windows 10 Pro Version 21H1 OS Build 19043.985 BlackWidow Ultimate Tartarus V1 (I have a Logitech G502 mouse, and have tested with it connected and with it not connected, with and without drivers.) Fresh install as of May 31st 2021. Everything was going fine and then I installed Synapse 2.0 because My devices are not handled by Synapse 3.0 I setup up my power button to turn off my displays when I press it. (the machine does not power down or go into sleep mode. This is by design.) That works great! Then I install Synapse 2.0 and reboot. I log in (note before I log in. I can press the power button and the displays turn off.) Once I log in and Synapse 2.0 updates from Razer.. I can no longer turn of my displays by time out or pressing my power button. When I press the power button, the displays go blank for about 2 seconds. Then come back on. I did check the box to turn off illumination on my Razer devices if the displays turn off. And for a moment they do go dark whe
I would like to be able to make notes with my keymaps. Sometimes it may be a while between use of apps and I can forget what shortcuts are what. If I could make notes for each key, it would be easy to recall what that key was used for. Also, It would be great if I could export a pdf of my keymap layouts with these notes, so that I can have a printable reference for easy review.
I just purchased the huntsman elite keyboard for my mac, I was going to use it mainly for my job as a developer, and I had no clue when I made the decision to buy huntsman elite that mac is not supported. My question, After the latest thread about the mac support (a year ago), will synapse 3 be available for mac users in the near future? if not, I have no choice but to return the keyboard. Note: I know that mac is not a gaming machine, but there is a wide variety of people that tends to buy gaming accessories now for their home office setups (chairs, keyboards, mouses ...) so it would be nice to support mac users for the next-gen devices that you are producing ...
Hi Guys, I am from Turkey and I live in Turkey. I have a question about shipping. In the description part of an equipment, you have written “USD DISCOUNT RAZERSTORE.COM”. I think it means only USA people can buy this. If I order this to Turkey, can I get the product to Turkey, my house? I put a photo in the attachment part below. Thank You, Yours Faithfully,
I've had many keyboards and mice from Razer but I really am now fed up, it is not your hardware, it is your software Razer Synapse. Ever since version 3 came out I have had so many irritating issues that I just now decided to move on to another brand. As I see it, a driver for a keyboard/mouse should not be seen or heard but for some reason, your software constantly needs attention. I have had issues with Razer 2 and 3 installed in parallel, at some point receiving multiple updates of the driver like every day - where I every time need to enter the password, you cant remember it? macros that are not loading, keybaords not showing up in Razer central, sometimes mouse dpi button not working and so on. I also sometimes see the driver take 13% of CPU time while doing something. It is not only on one PC, I have had this issue on several PCs Seriously life is just too short for this So long. PS. Sorry for the rant, but FFS get your act together.
Hi guys. Am I the only one, who faced with this issue? After my pc woke up from sleep or turned on, razer synapse promote me to log in. I checked box that " yes, it is my pc, don't worry", but every single time, I need to write my password. I started nervous already. Maybe there is some fix or trick to prevent entering password each time? My OS: Windows 10 PRO Razer Central v.126.96.36.19987 Razer Synapse v3.4.604.60316
First, I'm French so sorry for my bad English. So I just bought a Razer Kraken Tournament, so I want to install Razer Synapse 2.0 because I'm on Mac. I installed it and it asked me to allow accessibility access for RzDeviceEngine but it doesn't appear. So I allowed "Razer Synapse" and the application doesn't do anything Edit : Cauz of this I can't use the appli
Always being a fan of Razer, 4th mouse ( y they don't last long due to some technical issues which are most of the time easy to overcome, but i like the response and ease to use when they working correctly) and thought this time i buy an extra Razer mat for nice pairing the visual effect's Oh yeah i bought also 3 kraken 7.1 headphones before (2 for the kids). But what the hell are you doing with your drivers? I can follow that you want a new interface and change the underlying drivers to explore new features. What i can't follow is the crap solution and stupid excuses you are providing for pushing the 3.0 beta not integrating your old 2.0 drivers. Sry this was the last time i buy from you and this with pain in my hart.
I tried lots of ways to make a never stop loop but all failed. The request is simple, press a key every 1 sec and continues for more than 1 week. 1. Add the macro group itself to the end of the macro. 2. Set playback option to "Toggle continuous playback on/off using assigned key" Both methods stopped after several minutes without any notification. 3. Insert loop section, but it limited to 99999 times. Is there any way to set up a never stop loop lasts for more the 1 week?
Already have an account? Login
Log in with Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Log in with Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.