Razer Synapse

Hi everyone, I have a problem with my razer synapse 2. It all runs fine as it should one day, I wiggle to reset my PC, I download all my games and programs .. and razer synapse I can log in to my user but cannot access my keyboard. It keeps saying I need to register my protector, but I can't do that now I have already done so. I can't remove my keyboard and add it again. There are no problems with synapse 3. but will use 2! : D I hope some can help me, I'm a little lost. Translated with google translate !!!

Hi, 2 days ago i was using synapse 2 for my mouse and it was working all fine, yesterday i had to change to synapse 3 becasue my mouse wasnt detected anymore by synapse 2, so i have a "Problem" that when i close synapse 3 my mouse goes back to the Spectrum cycle (keeps changing color) , i want it to be the color that i assign (Red) ,when i used synapse 2 i could close synapse (when i say close its really closing not minimizing) and the color would still be the one that i assign, but with synapse 3 it only stays the color i assigned if i have it open. Is there anyway to close synapse 3 and the color still be the one i put?

Hi! I am new and I don't get the point of macros and how to use them. If you know, can you reply as it will be very helpful to my. thx ;-)

This just crossed my mind last night - it would be absolutely amazing if Razer implemented the ability to sync up Synapse/Chroma devices with IFTTT. I would love to play rain animations on my keyboard when it starts raining outside, have my whole setup flash when an email comes in, etc. It opens the door for so many cool possibilities! What do you guys think?

i would like to setup a macro that work only in 1 process even in background is it possible? the macro is simple it just had to press spacebar,z and f4 in loop

Hello, everyone! Let's say I have a simple C++ application: RZRESULT res = Init(); assert(res == RZRESULT_SUCCESS); ChromaSDK::Keyboard::STATIC_EFFECT_TYPE effect{}; effect.Color = RGB(255, 0, 0); // std::this_thread::sleep_for(std::chrono::seconds{1}); // This fixes it! res = CreateKeyboardEffect(ChromaSDK::Keyboard::CHROMA_STATIC, &effect, NULL); assert(res == RZRESULT_SUCCESS); getchar(); res = UnInit(); assert(res == RZRESULT_SUCCESS); Weirdly enough, this application doesn't work, unless I delay setting the effect for roughly a second. All asserts pass, but the effect doesn't apply. Looks like there's some kind of asynchronous initialization happening with no explicit way to control or observe it. Am I doing something wrong? Is there a way to consistently enable an effect immediately after application start?

Greetings! I'm using Razor Naga (and really happy with it, considering it the best mouse for me ever existed). So, I'm doing some complex and long macros via Synapse, which execute for more than a 5 minutes or more. And in such a long periods of time there could happen... say, an unpredictable situations which require an immediate attention, so I have to instantly FORCE STOP any macros processing and do what must be done with those situations. Well, that is the question, right in this topic's header.

Recently I have seen that my CPU is being used whit Windows Driver Foundation and that comes from the Razer Synapse. All the time the WDF jumps from 10% to 50% usage of CPU and I already try to uninstall and install again and the problem persisted.

Razer Surround Pro was working fine with my previous USB headset. I switched to a new pair of headsets which use an audio jack pair (sound and microphone), but since then whenever I reboot the sound is not correct (sounds default/aweful, definitely not through razer surround) until I turn razer surround OFF then back ON again (it always reboots set to ON which is fine) then its back to awesome again. If I then close down and reopen Razer Surround everything is fine an I do not have to manuall toggle it ON, so the issue is only after a Reboot or resume from Sleep, like it has not engaged with the OS/Hardware correctly. Why could this be? I have disabled all sound devices in windows except Razer Surround and the on board sound card.

Hello everyone ,this is my first time posting and it is due to a weird issue I experienced during the last synapse update as everything was working perfect before hand. Whenever I have synapse running and in game, my 2nd 1080 will drop to around 50% usage while the first 1080 stays at full load, not only does this cause a noticeable frame rate drop, but it seems that it is still trying to run in SLI so frame times skyrocket, artifacts appear and every game that actually supports SLI becomes completely unplayable(SLI issues? whaaaaaat?). As soon as I disable synapse, in game or not, my usage and frame rates both go back up. Its not that massive of an issue because everything still works, I am just unable to control the chroma portion of my setup. I may be wrong in this assumption, but it seems to me that the issue arose as soon as the screen awareness option was implemented. Rolling back nvidia drivers did not solve the issue so I resorted to rolling back the synapse and it works but I

Hi there ! Just as the title says, Synapse 3 refuses to launch when I start my pc; I have to manually launch it. In the settings menu, both Auto-Launch options are checked. I've also tried to force it to launch at startup with Task Schedule system app & through the system's register. Nothing works. This started a few days ago when I was trying to fix another problem (Synapse would start, but not minimized, and staying on top of any window, although the option was checked from day 1 and I never changed it). All I did was uncheck both, close Synapse, reboot, then open Synapse manually, check both both settings again, then reboot again. After this, Synapse stopped automatically launching, even though the 2 options are checked in the options menu. I ran out of ideas so I'm asking you guys for help. As a Side note, I've checked all services through services.msc (right after booting); All Razer services are running except for "Razer Synapse Service" and "Razer Game Manager Service". These t

Hello all, I had a question about the Chroma compatibility with certain hardware, as I'm looking to start upgrading my current rig. I know Chroma is getting more 3rd party integrations, and my question is about MSI. Would products that are compatible with MSI Mystic Light Sync (like the Corsair Vengence RBG Pro Memory) also be compatible with Chroma? Would you have to use MSI's software to control everything or can you use Chroma Studio in Synapse? Thanks in advanced for the help.

I purchased my razer basilisk mouse less than a year ago and recently there's been issues with the synapse 3 software (not the mouse itself). I set the polling rate of the mouse to 1000hz but whenever I switch profile (i.e. when starting a game) my polling rate goes down to 500hz. Even though my polling rate goes down to 500hz. the software itself is still showing it is at 1000hz. I tested this by using this website https://zowie.benq.com/ja/support/mouse-rate-checker.html . The issue is while the mouse can be used at 1000hz polling rate, for some reason the setting gets changed to 500hz when the profile is changed. Same is true for 125hz. Polling rate still changes to 500hz instead of staying at 125hz when changing profiles. Anyone know how to fix?

Just curious as to why the Razer logo doesn't light up when using the Chroma Visualizer like the rest of my keyboard does. I have a Blackwidow Chroma.

Well, I was enjoying some good music and went to the kitchen to get fuel for my Apex/Code session, anyway the transceiver is great for the short distances but once the number of interferences increases i.e. brick & mortar or other signals [Wi Fi] it understandably causes connectivity failure. This song is quite good. Is it possible to configure the receiver on the headset to that it could possibly connect over your own wi-fi network which in general has greater coverage. I am unsure of the hardware specifications or what wireless technology was used for communication between the transceiver and headset. I am hoping it's some low powered wi-fi antenna, which gives me hope that by utilising some clever coding a VOIP connection or something to the same effect to stream audio to the headset over your home network. Can someone give me a bit more insight into what technologies were ut

Hello everyone, i use Synapse 3 and MSI Mystic Light. The sync of the Mainboard LEDs works fine when i play Razer Compatible Games like Apex Legends or the Razer Visualizer. But the settings from Chroma Studio are simplay ignored by the LEDs on the Mainboard. Mystic Light is on Versoin 3.50 and Synapse on newest Release.

Hello. First of all, I'd like to address this problem is this occurs to others or is it just me. I'd like this to be resolved for gamers if they have it as well. Because it disrupts gaming in general and doesn't make me enjoy it. Whenever I'm gaming (from time to time) razer synapse pops up this https://imgur.com/a/IUKuP1x it tabs my game out and stops my mouse from working for a good 3-5 seconds. Can't do anything about it. Tried a lot of ways to fix it, uninstalled synapse, restarted pc, updating it ...etc. The only way to stop this from occuring is to close razer synapse that is the frustrating part. Sadly, it's a big no for me since I use Razer Naga. What's the point of having it if I can't use the keybinds on the mouse. Hope you all understand my issue. Thanks in advance.

What happened to the profile listings on the Chroma Workshop page? There used be to a few listed there for a few devices (still badly needed updating). Now it's all totally gone.

Ives seen/heard at least 20 people have this problem... After the new update the app isnt letting people sign in. Its stuck on the loading screen... Ive tried everything from uninstalling and reinstalling (twice) to using the repair option... Still no use ITS FRUSTRATING

Hi, i think the better question would be: Why am I not allowed to set an secondary function with the FN key in combination with the F1 - F8 keys in synapse, like with nearly every other key on the keyboard? ... I understand why im not able to change the hypershift-function of the F9 - F12 keys, cause its already in use, but I really don't understand it for the F1 - F8 keys. can someone pls explain? thank you very much (sorry for the bad english, not a nativ)

Razer chroma is awesome is there something they should work on or change? By the way Corsair or Razer

Hello, I just bought Razer Naga Trinity... I can't get my scrollwheel to function properly... When I tilt the scrollwheel right/left it just moves the page a tiny bit, but it does't keep scrolling...I have to press/tilt it multiple times, then it moves (but only small bits at a time). And in the Synapse control window, there is no function on the sensitivity for the tilting action...only the actual tilting action itself... Anyone with the same problem ? Solution ? I have reached out to Razer but only (so far) got back that I should try using another USB port, and unplugg/replug the USB cable. With no result for me...

I just downloaded the new razer synapse update which adds new chroma presets one of which is: audio meter I put it on cause ive been waiting for this for so long Only to be disappointed by it only changing everything to green when sound is on maybe a little color change in hard basses but that might just be my brain. also there's a Color Boost option, what does that do? both 4 and 0.25 looked the same is there a way to set it so it changes actual color? lets say when theres hardbases it goes white and when theres a soft girl singing its more pinkish?

Always being a fan of Razer, 4th mouse ( y they don't last long due to some technical issues which are most of the time easy to overcome, but i like the response and ease to use when they working correctly) and thought this time i buy an extra Razer mat for nice pairing the visual effect's Oh yeah i bought also 3 kraken 7.1 headphones before (2 for the kids). But what the hell are you doing with your drivers? I can follow that you want a new interface and change the underlying drivers to explore new features. What i can't follow is the crap solution and stupid excuses you are providing for pushing the 3.0 beta not integrating your old 2.0 drivers. Sry this was the last time i buy from you and this with pain in my hart.

Seriously, wtf happened, Razer? Your new synapse software was obviously designed by a social media team with no gaming experience. The UI is unintuitive and split up in a million tabs that seem to be primarily concerned with data mining. The macro builder is a joke and obviously was not programmed by a gamer - just doing something as simple as having one button depress a key and another release it requires text editing the XML import files. And then, to top it off, on a driver that is supposed to be for GAMERS the fricking update STEALS FOCUS from the game I am playing to tell me its important to update my data mining app... How the hell did this make it through QA? Stealing focus from a game you are playing at a critical moment is so bad, I do not think ANY other HID manufacturer has EVER made this mistake in the entire history of PC drivers. Ever. What the hell is going on, guys?