The Razer Armory

Hello,I’m curious what support can I get when my system runs out of warranty? Can I buy parts like battery, heatsinks and fans from Razer? that would be awesome and give more confidence on investing in these laptops. Regards

Hi! I have been struggling with my original deathadder v3 pro wireless dongle for a while now. It finally stopped working few days ago and was broken, so I ordered the hyperpolling dongle instead of the normal usb dongle. But now im worried that im not able to pair my mouse with the hyperpolling one after watching videos on how to setup the dongle. Almost every video had the original dongle in them. Is it possible or do I need to order a normal dongle aswell to be able to pair the mouse with the hyperpolling dongle? Any help is appreciated! :)

DEATHADDER CHROMA 마우스 휠 인코더 사이즈를 알고 싶어요

so my death adder V3 was working Fine with & without the dongle (wired & wireless)so when ever it’s run low on battery i would just disconnect the dongle and connect it to the mice easy peasy, no heck ups, no nothing, all set and ready to game.how ever this time while i am in the middle of a league of legends game the mice stopped moving, so i thought oh out of battery cool cool, let me hock it to the charger and continue, little that i know it wasn’t connecting, i wasn’t getting the sound from windows when a device connects to it via USB.oddly the dangle was connecting to the pc and was getting recognized by the pc, but not synapse 3 and the mice wasn’t showing.i tried to connect it to the other PC’s & laptops with no luck the light indicator on the mice wasn’t working but the laser sensor was working when ever i connect it to any source of power.i tried installing and running the following:“Applicable Products: RZ01-04630 Mouse Firmware updater v2.00.03_r1, Dongle Firmwar

Hi Razer Community, I have a Blade 16 with the 4090, and I'm seeing temperature spikes up to 107°C, with average temps ranging from 84-95°C. Despite using a Razer stand, undervolting to -125, and running the fans on full, temperatures remain high, especially under CPU boost and GPU high settings. Razer support has offered to service or replace the laptop, but I'm unsure if a replacement would make a difference, as all units seem to run hot under these conditions. My room, decorated with a balloon garland from House of Party, might also affect airflow. Should I focus on the average temperatures or be more concerned about the spikes? Any advice would be greatly appreciated!

Just wondering, as 1) The press release said 1000, 2) The only decent youtube video has footage from a rep at evo stating there was 1200 3) From having bought limited controllers from xbox before, what they seem to do is keep making as many batches as the orders take up until the time they want to stop selling them runs out.Is it possible to get a honest answer if they actually are limited, and if so, how many are being / were made.Thanks 

Sooo i’ve been using this headset for 2 years now and the earpads start to feel dirty ‘cause the sweat is in there (the cloth part) so i wanna know from other owners of this model or anyone how can i clean the cloth part, because i really dunno how to do that and i don’t want to damage the earpads as i am not buying replacements yetThe cloth part is what i want to clean, don’t mind the leather

It’s just as simple as the title, where are the options for the mic to activate the mic return on the razer kraken v3 x USB.I already have razer synapse v3, my headset is found but I only have 2 tab in the sound section (sound and lignthing).

Hi,I recently bought a VIPER V3 HYPERSPEED mouse and the USB dongle has a rattle inside when I move it. I want to know if it is normal or if this means that something is detached inside. The mouse works properly at the moment. Should I be worried about this resulting in a problem in the future?Thanks in advance!

Why is the top of the line Razerblade getting no real bios updates? 5k on a laptop and I can only use ram up to 5200??? This might be my last blade if support is this poor. My last Lenovo Pro was updated constantly. That’s why they have a cult following. Also, the 2024 16 isn’t even in synapse Beta. 

so much time  invested for 63 cents worth in silver

Where can we purchase M3 and M4 buttons from, they are broken, its whack and i want to fix it. Thanks in advance.

FOUR separate Razer Wolverine V2 Chroma Back Buttons have now broken for me. Always the left side upper button’s (bound to X, which means a lot of use due to Reload/Interact) plastic interior latch will break first. Which means it can slide down and get stuck in the left side lower button (bound to Y) resulting in either X+Y or just Y registering when I wanted only X.Look at this video explaining it perfectly and also providing a fix: https://www.youtube.com/watch?v=ZLmVASizKKQ&t=0sAnother one! https://www.youtube.com/watch?v=RHhEq6-TrNk&t=5s No, I don’t press like a madman. After the first set of back buttons broke I started to actively think about how hard I pressed them. It doesn’t matter. The interior latch mechanism that hold the buttons in place and what makes you able to click them has a really flimsy low quality that no matter how hard you press, if you only use this controller, they will give out. Other than this I think this is the best controller I have ever used and

I’m about to buy DeathStalker V2 keyboard with Linear RED switches and US layout, but I found that there are two versions with two different model numbers, but I couldn’t even find even 1 single difference between them, so I want to ask if anyone knows if there is any kind of difference between them:Razer.com’s version: “RZ03-04500200-R3U1”Razer.com/eu-en/’s version: “RZ03-04500100-R3M1”

My keyboard is working while connected by cable but isn’t charging correctly, battery is stuck at 0%.Already tried to reinstall synapse 3  remove driver and firmware is updated.I've only used it for 4 months. ้

I use the Razer Naga V2 Pro mouse. The side buttons just remap from mouse 4 and mouse 5 to "minus" and something. I checked the app and the buttons are still mapped as mouse 4 and 5, but when the button is pressed it reads out as "minus/-" on mouse 5 and something else on mouse 4. I don't get why it is doing this. (I use the 2 button attachment usually, when i switch to the 6 button attachment the problem goes away until i reattach the 2 button) 

I think i have figured out the issue but, my mouse has been moving by itself, sometimes doesn't click when i want it to, and scrolling when it wants to. i have found a fix by connecting the mouse via Bluetooth, it stopped all the issues but before that i connected my old mouse because i thought it was the mouse that was broken but turns out it was the dongle. Which i will be buying a new dongle for the mouse when its back in stock.

I recently encountered a booting Issue with my blade 15 and it looks like this (not my video), I heard it could be the CMOS battery being dead or whatnot but after reading the comments it appears that even after replacing the CMOS battery it still happens. I also bought a new CMOS battery similar to the one in the laptop (ML1220) but it has a different Connector so Im hoping you guys can also help me source the right one. TLDR:Blade 15 having boot issues like this could be a dead CMOS battery but also something else. 

I BUY A CASQUE RAZER BLACHSHARK  AND I DIDNT GOT THE CODE TO ACTIVATE SOUND7.1SO I CREAT A ACOMPT FOR TO GOT THE CODE BUT WHEN I ENTER SERIEL NUMBER I GOT A MESSAGE THAT MY DEVICE IS ALREDY REGISTRED. WHAT I CAN DO TO GOT THE CODE PLZ?

Within the weekly play to earn there is always a chance that it can be a game you buy to earn rewards first, or a free to play game. With these circumstances you sometimes won’t be able to earn silver if you don’t want to use those games, even if they’re free or paid for. So why not have a sub category within that allows you to play more popular games or your own games at a slower rate of earning. Such as 5 tokens every 30 minutes of play, and a cap of 25 silver daily and 50 weekly, meaning that after 2 days of play on your preferred game you now are required to use the featured games. The earning rate and times can be altered.Thoughts?

It was working fine before, but when I turned in my set, it caught the cord and pulled it out of my PC. After plugging it back in, the sound card stopped working, so I can't hear using it or use the mic. The headset isn't broken since I can still hear with the PC sound card, but not the Razer sound card.

Razer Huntsman Mini Analog - US on %46 sale but i will receive my money like 1 week later when sale ends?