- 31,296 Threads
- 44,965 Replies
where is Rapid trigger settings for Huntsman analog mini?
I cant find Rapid trigger settings for Huntsman analog mini Other key settings are fine, it worksI updated synapse but still I cant find it.Also I tried to reinstall that synapse3.And some people got this rapid trigger problem too, I saw those people in twitter and some youtube commentsWhat should I do next?
razer 14 fans not working
Hi I have a issue with my new razer 14 2022 after a gaming session my fps dramatically dropped and when looking at it my fans (both) were not spinning. After going in to synaps I put fans onto manual and fans spin but at one speed very low. No matter how much I try to adjust the speed nothing changes. I also put it back to auto where both fans just stop and cpu gets to 100 degrees. I tried reinstalling razer synaps but the same thing happens. Any help would be amazing as I don't know where to go from here.
Razer Nari Essential only works on right side
Recently my headphones right ear stopped working when I was playing a game, I thought it was my driver's but that didn't help it, so I read some question that was going on here and most of them didn't fix my problems, so how can I fix my right in on my headphones?
razer barracuda usb c
My dongle only works when I connect it using the adapter for the regular usb and I’d like to connect it to the computer directly through the usbc port but I can’t figure out how. The headset turns on and connects to the dongle but when I try to switch the audio and microphone to the headset it doesn’t pop up. I know I can just use the adapter but I’d really rather not need that. I don’t see it in my device manager either.
Razer Synapse not showing 4k polling rate, despite mouse having it
Hello there, So recently I purchased the Razer Viper V2 pro (white edition), even though it comes with 4k polling rate, It doesn’t come up on synapse, it still shows 250/500/1000. I’ve tried updating the firmware of the dongle, mouse, updated the Synapse software, then proceeded to re-install the Razer Synapse 3 software but to not avail.Am I doing something wrong or misunderstanding something?Kind Regards,
Problem signature THXService.exe
Hi i’ve recently run into some audio issues when using Discord overlay or streaming on there. I was told that in my DxDiag, I had a thx error that could be causing my audio disconnections when I’m using Discord. I’m using the Razer Kraken Kitty headset. This issue has never happened on my laptop before. I got a pc about a few weeks before it started happening. **It happens specifically when I’m streaming my screen or using discord overlay** I would like to keep using discord overlay because of its convenience. Things I’ve tried:1. I’ve contacted discord and we went back and forth for 2 weeks and haven’t found a solution. 2. Reinstalled Discord and made sure to delete their appdata/ localappdata folders.3. Tweaked around with the Discord/ windows sound settings.4. Did a file check and fixed corrupted files.5. Uninstalled Razer Synapse and all of its folders that had “Razer” as its title.6. Tried windowed/ borderless/ full screen options in games.7. I’ve factory reset my pc and went fro
i have sent my laptop to service 2 months ago and i still got nothing returned
So i have bought a laptop which had a problem with the keyboard after a few months of use and i had still got the warranty so i have shipped it to the razer service and they said after 1 week that they cannot fix it and thats why they will send me a new one. They offered me a laptop with US keyboard layout but it is not the same as the EU keyboard, so i refused that and i told them i need eu layout. They said it is fine they will replace the keyboard layout. Another 1-2 weeks has passed again and i havent got any update so i wrote them an email and it turned out that they cannot replace it because they dont have eu keyboard and they thought they had false but the support said that she will ask the repair team again and they will switch it. 2 weeks has passed again and i have not got any update on the case nor my device. I am losing faith and hope. It was a really expensive laptop and i thought they will be helpful and fast with the repair then i thought it would be even faster to get a
Razer Nommo powers off
Serial-472305B03800106 Razer Nommo speakers just bought and setup. While working on PC the speakers will just shut off. I’ve seen other posts in the Razer Support and also in reviews for these speakers with users having the same issue. I think these sound great, but I’m very saddened and frustrated by this issue. I’ve tried a suggestion that said to disable a power setting. I restarted the PC and the speakers still shut off. I would like them to remain on always unless I turn them off. If this is not possible then I will be returning these for a refund. I hope someone can assist me to resolve this issue as I would like to keep them.
Razer black v2 mic issues
Currently in the process of moving places and made a makeshift setup, all works fine audio included but i am just using the standalone 3.5 jack without the USB soundcard and now the headset is not being detected as with a microphone, do i need the usb sound card in order to make the mic work or not?Thank you.
Razer Blade 14 (2022) Not Fit for Purpose - Power Issue / Fault / Won't Power On
I purchased a Razer Blade 14 (2022) model from the Razer store on Amazon in June 2022. I have had nothing but issues with this laptop model dying since then.That initial laptop failed (would not power on - screen dead - no hdmi output) in September 2022. Amazon replaced it with a new unit in September 2022 under extended Amazon warranty. Completely new unit received. Same issue occurred - it died on 21st February 2023. Support ticket opened on 21st February 2023 (as Amazon would no longer replace). RMA issued 23rd February 2023. Laptop repaired (motherboard replacement) and returned to me on 6th March 2023. That laptop has failed again (same issue) today, 5th June 2023. New case has been opened with Razer requesting replacement unit or refund.I’m a very concerned about this now and searching these forums it seems this is happening to others too:https://insider.razer.com/razer-support-45/2022-razer-blade-14-will-not-power-on-37902https://insider.razer.com/systems-14/razer-blade-14-2022-
Razer Kishi V2 not detected
I’m kind of perplexed about what to do next. My situation is as follows :My fiancee and I have the same phone (LG Velvet 5G) on Android 13. My Razer Kishi V2 would work on hers but won’t on mine. It had before I factory reset it.• Observation: when connecting on my fiancee’s phone. The text would appear on the bottom of the screen and says “Keyboard has been connected”. This would not appear on mine.• I’ve looked at my usb connector for anything that would obstruct or for any damage. Nothing.• I’ve looked at some forums saying that I should enable certain developer options. USB debugging, for example. As it has no relation to the problem at hand.• I thought maybe it was an issue with my phone's compatibility with the USB OTG. From what I understand, this option is present in pretty much all newer phones.• I thought maybe I should update the firmware of the Kishi (I mean since everything fails so far). Unfortunately, I can’t. The Kishi app is not available on my phone. Nowhere to be fou
Baracuda Mic Quality problems
I recently purchased a brand new Barracuda head set. And everyone is telling me the mic quality is super poor. I run higher noise cancellation on the mic because of my wife watching TV in the same room but everyone says it sounds like I’m coming through a web cam no matter how i chance the settings in synapse. Any suggestions or is it just the noise cancellation that’s making things terrible?
Razer book 13 m.2 screw
I recently bought a second hand 2021 razer book 13. I opened it up and saw that it was missing the screw that held down the m.2 ssd. I tried some spare ones I had but the threads were too big. I then tried buying a set online that had 2.5 and 3 mm ones and they were both two big. I tried calling the support line but was told they could not tell me anything about the internals. If anyone knows what size screw it is and or where to buy them please let me know.
EGPU RAZER CORE X + GTX 1080 TI + ASUS ZENBOOK PRO UX501VW
HiI have a laptop ASUS Zenbook pro UX501vw with internal graphics card Intel HD Graphics 530 and NVIDIA Geforce GTX 960M under WINDOWS 11 For more graphics power, I buy a EGPU RAZER CORE X and a NVIDIA Geforce GTX 1080 TI to connect to my thunderbolt 3 port. After updating thunderbold firmware and drivers, my laptop detect my RAZER CORE X and I can see in my system managment (peripheral) the 3 cards (Intel HD graphics, Nvidia GTX 960M and the GTX 1080 TI) Unfortunitly, the NVIDIA CONTROL PANEL only detect the GTX 960 M (I have the latest drivers for all my cards and last Geforce experience). What's wrong with the GTX 1080 TI ?More information :I connect an external display directly to the 1080's output → Nothingi uninstall the NVDIDA GTX 960M and now i have this message (translation from french) : NVIDIA display not available - You have no screen connected to a NVIDIA Graphics Card.
Razer Huntsman tournament edition not connecting at all to computer or laptop
ive had my Huntsman for just over 2 years so sadly the warranty is now expired but i came home the other day and found it doesnt connect to my computer at all or even my laptop when its been completely fine the whole time. i have no clue what could be wrong?
Reset efi keys on Razer Blade 15 (2021)
Hi,I have a dual boot on my Blade with disabling secure boot.I could re-activate secure boot by using my keys (sbctl for Archlinux), however I need to reset the actual keys from the bios/uefi.I saw this option on others bios but not in the Blade one’s.Is someone knows how to reset these keys on the Blade ?Thanks for your help
Already have an account? Login
Login to Razer ID to create new threads and earn badges.LOG IN
Welcome to Razer Insider
Login to Razer ID to create new threads and earn badges.LOG IN
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.